Aws-iot-device-sdk-python-v2: स्थापना के साथ समस्या

आप कौन सा ओएस उपयोग कर रहे हैं? आपने ओपनएसएल का कौन सा संस्करण स्थापित किया है? खुला ssl संस्करण प्राप्त करने के लिए openssl version -a

क्या आपने निम्न कोशिश भी की है:

स्थापना मुद्दे

awsiotsdk awscrt पर निर्भर करता है, जो C एक्सटेंशन का उपयोग करता है। प्रमुख प्लेटफार्मों (मैक, विंडोज, लिनक्स, रास्पियन) पर स्थापित करते समय पूर्व-संकलित पहियों को डाउनलोड किया जाता है। यदि आपके प्लेटफॉर्म के लिए पहिए उपलब्ध नहीं हैं, तो आपकी मशीन को कुछ सी पुस्तकालयों को संकलित करना होगा। यदि आप समस्याओं का सामना करते हैं, तो निम्नलिखित स्थापित करें और पुनः प्रयास करें:

सुडो एपीटी-अपडेट प्राप्त करें
sudo apt-cmake स्थापित करें
sudo apt-libssl-dev . स्थापित करें

मुझे Ubuntu 20.04 / aarch64 / Python 3.8 / OpenSSL 1.1.1f में ठीक वैसी ही समस्या है।

मैंने पहले ही यह कोशिश कर ली है, और मेरा डिवाइस एक जेटसन नैनो है। मेरे पास ओपनएसएसएल 1.1.1 स्थापित है, और मैंने sudo -H python3 -m pip install awsiotsdk==1.5.0 के साथ स्थापित करने का प्रयास किया है और यह काम करता है, इसलिए मुझे लगता है कि यह नवीनतम रिलीज के साथ एक समस्या है

क्या आपने निम्न कोशिश भी की है:

स्थापना मुद्दे
awsiotsdk awscrt पर निर्भर करता है, जो C एक्सटेंशन का उपयोग करता है। प्रमुख प्लेटफार्मों (मैक, विंडोज, लिनक्स, रास्पियन) पर स्थापित करते समय पूर्व-संकलित पहियों को डाउनलोड किया जाता है। यदि आपके प्लेटफॉर्म के लिए पहिए उपलब्ध नहीं हैं, तो आपकी मशीन को कुछ सी पुस्तकालयों को संकलित करना होगा। यदि आप समस्याओं का सामना करते हैं, तो निम्नलिखित स्थापित करें और पुनः प्रयास करें:
सुडो एपीटी-अपडेट प्राप्त करें
sudo apt-cmake स्थापित करें
sudo apt-libssl-dev . स्थापित करें

@ Sanrro10 के समान चरणों के माध्यम से चल रहा है लेकिन रास्पबेरी पाई के साथ मुझे एक ही समस्या का अनुभव होता है। V1.5.0 पर वापस रोलिंग ने काम किया। निश्चित रूप से v1.5.1 के साथ एक समस्या।

हम वर्तमान में एक सुधार पर काम कर रहे हैं, लेकिन यह केवल एआरएम प्लेटफॉर्म को प्रभावित करना चाहिए। अभी के लिए, जैसा कि @ Sanrro10 को पता चला है, आप केवल पिछले संस्करण 1.5.0 का उपयोग कर सकते हैं। फिक्स प्रकाशित होने के बाद मैं इस मुद्दे को अपडेट करूंगा।

मैं एक तुच्छ डॉकटर कंटेनर में निर्भरता के रूप में awsiotsdk के साथ एक ऐप इंस्टॉल करने में एक ही समस्या देखता हूं।

  Building wheel for awscrt (setup.py): finished with status 'error'
  ERROR: Command errored out with exit status 1:
   command: /usr/local/bin/python -u -c 'import sys, setuptools, tokenize; sys.argv[0] = '"'"'/tmp/pip-install-74gwxf0s/awscrt/setup.py'"'"'; __file__='"'"'/tmp/pip-install-74gwxf0s/awscrt/setup.py'"'"';f=getattr(tokenize, '"'"'open'"'"', open)(__file__);code=f.read().replace('"'"'\r\n'"'"', '"'"'\n'"'"');f.close();exec(compile(code, __file__, '"'"'exec'"'"'))' bdist_wheel -d /tmp/pip-wheel-jum46of1
       cwd: /tmp/pip-install-74gwxf0s/awscrt/
  Complete output (130 lines):
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-x86_64-3.8
  creating build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/__init__.py -> build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/io.py -> build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/awsiot_mqtt_connection_builder.py -> build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/crypto.py -> build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/http.py -> build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/auth.py -> build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/exceptions.py -> build/lib.linux-x86_64-3.8/awscrt
  copying awscrt/mqtt.py -> build/lib.linux-x86_64-3.8/awscrt
  running build_ext
  cmake version 3.13.4

  CMake suite maintained and supported by Kitware (kitware.com/cmake).
  --- Building dependency: s2n (RelWithDebInfo) ---
  cmake -DCMAKE_PREFIX_PATH=/tmp/pip-install-74gwxf0s/awscrt/build/deps/install -DCMAKE_INSTALL_PREFIX=/tmp/pip-install-74gwxf0s/awscrt/build/deps/install -DBUILD_SHARED_LIBS=OFF -DCMAKE_BUILD_TYPE=RelWithDebInfo -DBUILD_TESTING=OFF -DCMAKE_INCLUDE_PATH=\"/usr/local/include/python3.8\" -DCMAKE_LIBRARY_PATH=\"/usr/local/lib\" -DLibCrypto_INCLUDE_DIR=/tmp/pip-install-74gwxf0s/awscrt/build/deps/libcrypto/include -DLibCrypto_STATIC_LIBRARY=/tmp/pip-install-74gwxf0s/awscrt/build/deps/libcrypto/lib/libcrypto.a /tmp/pip-install-74gwxf0s/awscrt/crt/s2n
  -- The C compiler identification is GNU 8.3.0
  -- Check for working C compiler: /usr/bin/cc
  -- Check for working C compiler: /usr/bin/cc -- works
  -- Detecting C compiler ABI info
  -- Detecting C compiler ABI info - done
  -- Detecting C compile features
  -- Detecting C compile features - done
  -- Looking for pthread.h
  -- Looking for pthread.h - found
  -- Looking for pthread_create
  -- Looking for pthread_create - not found
  -- Check if compiler accepts -pthread
  -- Check if compiler accepts -pthread - yes
  -- Found Threads: TRUE
  -- Attempting to try_compile PQ ASM
  -- The ASM compiler identification is GNU
  -- Found assembler: /usr/bin/cc
  -- PQ ASM try_compile succeeded - using optimized x86_64 assembly for PQ crypto
  -- Attempting to try_compile PQ ASM with ADX support
  -- PQ ASM try_compile with ADX support succeeded - using ASM code with ADX instructions
  -- Performing Test S2N_HAVE_EXECINFO
  -- Performing Test S2N_HAVE_EXECINFO - Success
  -- Found LibCrypto: /tmp/pip-install-74gwxf0s/awscrt/build/deps/libcrypto/lib/libcrypto.a
  -- LibCrypto Include Dir: /tmp/pip-install-74gwxf0s/awscrt/build/deps/libcrypto/include
  -- LibCrypto Shared Lib:  /usr/lib/x86_64-linux-gnu/libcrypto.so
  -- LibCrypto Static Lib:  /tmp/pip-install-74gwxf0s/awscrt/build/deps/libcrypto/lib/libcrypto.a
  -- Configuring done
  CMake Error at CMakeLists.txt:191 (add_library):
    Target "s2n" links to target "LibCrypto::Crypto" but the target was not
    found.  Perhaps a find_package() call is missing for an IMPORTED target, or
    an ALIAS target is missing?


  CMake Error at CMakeLists.txt:239 (target_include_directories):
    Error evaluating generator expression:

      $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

    Target "LibCrypto::Crypto" not found.


  CMake Error at CMakeLists.txt:239 (target_include_directories):
    Error evaluating generator expression:

      $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

    Target "LibCrypto::Crypto" not found.


  CMake Error at CMakeLists.txt:239 (target_include_directories):
    Error evaluating generator expression:

      $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

    Target "LibCrypto::Crypto" not found.


  CMake Error at CMakeLists.txt:239 (target_include_directories):
    Error evaluating generator expression:

      $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

    Target "LibCrypto::Crypto" not found.


  CMake Error at CMakeLists.txt:191 (add_library):
    Target "s2n" links to target "LibCrypto::Crypto" but the target was not
    found.  Perhaps a find_package() call is missing for an IMPORTED target, or
    an ALIAS target is missing?


  -- Generating done
  CMake Warning:
    Manually-specified variables were not used by the project:

      CMAKE_INCLUDE_PATH


  -- Build files have been written to: /tmp/pip-install-74gwxf0s/awscrt/build/deps/s2n
  Traceback (most recent call last):
    File "<string>", line 1, in <module>
    File "/tmp/pip-install-74gwxf0s/awscrt/setup.py", line 245, in <module>
      setuptools.setup(
    File "/usr/local/lib/python3.8/site-packages/setuptools/__init__.py", line 161, in setup
      return distutils.core.setup(**attrs)
    File "/usr/local/lib/python3.8/distutils/core.py", line 148, in setup
      dist.run_commands()
    File "/usr/local/lib/python3.8/distutils/dist.py", line 966, in run_commands
      self.run_command(cmd)
    File "/usr/local/lib/python3.8/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/usr/local/lib/python3.8/site-packages/wheel/bdist_wheel.py", line 223, in run
      self.run_command('build')
    File "/usr/local/lib/python3.8/distutils/cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "/usr/local/lib/python3.8/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/usr/local/lib/python3.8/distutils/command/build.py", line 135, in run
      self.run_command(cmd_name)
    File "/usr/local/lib/python3.8/distutils/cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "/usr/local/lib/python3.8/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/tmp/pip-install-74gwxf0s/awscrt/setup.py", line 179, in run
      self._build_dependency(lib)
    File "/tmp/pip-install-74gwxf0s/awscrt/setup.py", line 162, in _build_dependency
      subprocess.check_call(cmake_args)
    File "/usr/local/lib/python3.8/subprocess.py", line 364, in check_call
      raise CalledProcessError(retcode, cmd)
  subprocess.CalledProcessError: Command '['cmake', '-DCMAKE_PREFIX_PATH=/tmp/pip-install-74gwxf0s/awscrt/build/deps/install', '-DCMAKE_INSTALL_PREFIX=/tmp/pip-install-74gwxf0s/awscrt/build/deps/install', '-DBUILD_SHARED_LIBS=OFF', '-DCMAKE_BUILD_TYPE=RelWithDebInfo', '-DBUILD_TESTING=OFF', '-DCMAKE_INCLUDE_PATH="/usr/local/include/python3.8"', '-DCMAKE_LIBRARY_PATH="/usr/local/lib"', '-DLibCrypto_INCLUDE_DIR=/tmp/pip-install-74gwxf0s/awscrt/build/deps/libcrypto/include', '-DLibCrypto_STATIC_LIBRARY=/tmp/pip-install-74gwxf0s/awscrt/build/deps/libcrypto/lib/libcrypto.a', '/tmp/pip-install-74gwxf0s/awscrt/crt/s2n']' returned non-zero exit status 1.
  ----------------------------------------
  ERROR: Failed building wheel for awscrt

मुझे आर्क लिनक्स, पायथन 3.8, ओपनएसएसएल v.1.1.1h पर एक ही समस्या है।

यहां वही समस्या है: डॉकर छवि पायथन: रास्पबेरी पीआई 4 पर
कंटेनर में संस्करण: डेबियन GNU/Linux 10 (बस्टर), पायथन 3.9.0, Openssl 1.1.1d
दुर्भाग्य से संस्करण 1.5.0 ansd 1.4.0 मेरे लिए काम नहीं करते हैं, यह एक अलग त्रुटि फेंकता है। संलग्न फाइल देखें..
कंटेनर के बाहर (रास्पियन) 1.5.0 काम करता है।
error_awsiotsdk.txt
क्या डोकर कंटेनरों में ज्ञात त्रुटियां हैं?
संपादित करें : मुझे पता चला कि यह पायथन 3.9.0 के साथ असंगत है! 3.8 का उपयोग करके यह काम करता है।

मुझे भी यह समस्या हो रही है। मैं अजगर 3.7.3 के साथ रास्पबेरी 3 मॉडल बी का उपयोग कर रहा हूं।

Looking in indexes: https://pypi.org/simple, https://www.piwheels.org/simple
Processing /home/pi/aws-iot-device-sdk-python-v2
Collecting awscrt==0.9.3 (from awsiotsdk==1.0.0.dev0)
  Using cached https://files.pythonhosted.org/packages/83/2b/ad7fe011bb17baeb59f4a6e4b6f8b0e53da607b6cc2b50bf3e3c57624a7e/awscrt-0.9.3.tar.gz
Building wheels for collected packages: awsiotsdk, awscrt
  Running setup.py bdist_wheel for awsiotsdk ... done
  Stored in directory: /home/pi/.cache/pip/wheels/c2/c1/c8/34fc01d6902334ae9a2945b916990246499b722dfd1bfe1970
  Running setup.py bdist_wheel for awscrt ... error
  Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-wejvufi4/awscrt/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" bdist_wheel -d /tmp/pip-wheel-5cp0qcot --python-tag cp37:
  running bdist_wheel
  running build
  running build_py
  creating build
  creating build/lib.linux-armv7l-3.7
  creating build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/__init__.py -> build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/awsiot_mqtt_connection_builder.py -> build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/mqtt.py -> build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/io.py -> build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/exceptions.py -> build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/crypto.py -> build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/http.py -> build/lib.linux-armv7l-3.7/awscrt
  copying awscrt/auth.py -> build/lib.linux-armv7l-3.7/awscrt
  running build_ext
  cmake version 3.18.2

  CMake suite maintained and supported by Kitware (kitware.com/cmake).
  --- Building dependency: s2n (RelWithDebInfo) ---
  cmake -DCMAKE_PREFIX_PATH=/tmp/pip-install-wejvufi4/awscrt/build/deps/install -DCMAKE_INSTALL_PREFIX=/tmp/pip-install-wejvufi4/awscrt/build/deps/install -DBUILD_SHARED_LIBS=OFF -DCMAKE_BUILD_TYPE=RelWithDebInfo -DBUILD_TESTING=OFF -DCMAKE_INCLUDE_PATH=\"/usr/include/python3.7m\" -DLibCrypto_INCLUDE_DIR=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/include -DLibCrypto_STATIC_LIBRARY=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/lib/libcrypto.a /tmp/pip-install-wejvufi4/awscrt/crt/s2n
  -- The C compiler identification is GNU 8.3.0
  -- Detecting C compiler ABI info
  -- Detecting C compiler ABI info - done
  -- Check for working C compiler: /usr/bin/cc - skipped
  -- Detecting C compile features
  -- Detecting C compile features - done
  -- Looking for pthread.h
  -- Looking for pthread.h - found
  -- Performing Test CMAKE_HAVE_LIBC_PTHREAD
  -- Performing Test CMAKE_HAVE_LIBC_PTHREAD - Failed
  -- Check if compiler accepts -pthread
  -- Check if compiler accepts -pthread - yes
  -- Found Threads: TRUE
  -- Attempting to try_compile PQ ASM
  -- The ASM compiler identification is GNU
  -- Found assembler: /usr/bin/cc
  -- PQ ASM try_compile failed - using generic C code for PQ crypto
  -- Performing Test S2N_HAVE_EXECINFO
  -- Performing Test S2N_HAVE_EXECINFO - Success
  -- Found LibCrypto: /tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/lib/libcrypto.a
  -- LibCrypto Include Dir: /tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/include
  -- LibCrypto Shared Lib:  /usr/lib/arm-linux-gnueabihf/libcrypto.so
  -- LibCrypto Static Lib:  /tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/lib/libcrypto.a
  -- Configuring done
  CMake Error at CMakeLists.txt:191 (add_library):
    Target "s2n" links to target "LibCrypto::Crypto" but the target was not
    found.  Perhaps a find_package() call is missing for an IMPORTED target, or
    an ALIAS target is missing?


  CMake Error at CMakeLists.txt:239 (target_include_directories):
    Error evaluating generator expression:

      $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

    Target "LibCrypto::Crypto" not found.


  CMake Error at CMakeLists.txt:239 (target_include_directories):
    Error evaluating generator expression:

      $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

    Target "LibCrypto::Crypto" not found.


  CMake Error at CMakeLists.txt:191 (add_library):
    Target "s2n" links to target "LibCrypto::Crypto" but the target was not
    found.  Perhaps a find_package() call is missing for an IMPORTED target, or
    an ALIAS target is missing?


  -- Generating done
  CMake Warning:
    Manually-specified variables were not used by the project:

      CMAKE_INCLUDE_PATH


  CMake Generate step failed.  Build files cannot be regenerated correctly.
  Traceback (most recent call last):
    File "<string>", line 1, in <module>
    File "/tmp/pip-install-wejvufi4/awscrt/setup.py", line 263, in <module>
      'boto3'
    File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 145, in setup
      return distutils.core.setup(**attrs)
    File "/usr/lib/python3.7/distutils/core.py", line 148, in setup
      dist.run_commands()
    File "/usr/lib/python3.7/distutils/dist.py", line 966, in run_commands
      self.run_command(cmd)
    File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/usr/lib/python3/dist-packages/wheel/bdist_wheel.py", line 188, in run
      self.run_command('build')
    File "/usr/lib/python3.7/distutils/cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/usr/lib/python3.7/distutils/command/build.py", line 135, in run
      self.run_command(cmd_name)
    File "/usr/lib/python3.7/distutils/cmd.py", line 313, in run_command
      self.distribution.run_command(command)
    File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
      cmd_obj.run()
    File "/tmp/pip-install-wejvufi4/awscrt/setup.py", line 179, in run
      self._build_dependency(lib)
    File "/tmp/pip-install-wejvufi4/awscrt/setup.py", line 162, in _build_dependency
      subprocess.check_call(cmake_args)
    File "/usr/lib/python3.7/subprocess.py", line 347, in check_call
      raise CalledProcessError(retcode, cmd)
  subprocess.CalledProcessError: Command '['cmake', '-DCMAKE_PREFIX_PATH=/tmp/pip-install-wejvufi4/awscrt/build/deps/install', '-DCMAKE_INSTALL_PREFIX=/tmp/pip-install-wejvufi4/awscrt/build/deps/install', '-DBUILD_SHARED_LIBS=OFF', '-DCMAKE_BUILD_TYPE=RelWithDebInfo', '-DBUILD_TESTING=OFF', '-DCMAKE_INCLUDE_PATH="/usr/include/python3.7m"', '-DLibCrypto_INCLUDE_DIR=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/include', '-DLibCrypto_STATIC_LIBRARY=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/lib/libcrypto.a', '/tmp/pip-install-wejvufi4/awscrt/crt/s2n']' returned non-zero exit status 1.

  ----------------------------------------
  Failed building wheel for awscrt
  Running setup.py clean for awscrt
Successfully built awsiotsdk
Failed to build awscrt
Installing collected packages: awscrt, awsiotsdk
  Running setup.py install for awscrt ... error
    Complete output from command /usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-wejvufi4/awscrt/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-cg6etnjd/install-record.txt --single-version-externally-managed --compile --user --prefix=:
    running install
    running build
    running build_py
    creating build/lib.linux-armv7l-3.7
    creating build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/__init__.py -> build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/awsiot_mqtt_connection_builder.py -> build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/mqtt.py -> build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/io.py -> build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/exceptions.py -> build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/crypto.py -> build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/http.py -> build/lib.linux-armv7l-3.7/awscrt
    copying awscrt/auth.py -> build/lib.linux-armv7l-3.7/awscrt
    running build_ext
    cmake version 3.18.2

    CMake suite maintained and supported by Kitware (kitware.com/cmake).
    --- Building dependency: s2n (RelWithDebInfo) ---
    cmake -DCMAKE_PREFIX_PATH=/tmp/pip-install-wejvufi4/awscrt/build/deps/install -DCMAKE_INSTALL_PREFIX=/tmp/pip-install-wejvufi4/awscrt/build/deps/install -DBUILD_SHARED_LIBS=OFF -DCMAKE_BUILD_TYPE=RelWithDebInfo -DBUILD_TESTING=OFF -DCMAKE_INCLUDE_PATH=\"/usr/include/python3.7m\" -DLibCrypto_INCLUDE_DIR=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/include -DLibCrypto_STATIC_LIBRARY=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/lib/libcrypto.a /tmp/pip-install-wejvufi4/awscrt/crt/s2n
    -- Attempting to try_compile PQ ASM
    -- PQ ASM try_compile failed - using generic C code for PQ crypto
    -- LibCrypto Include Dir: /tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/include
    -- LibCrypto Shared Lib:  /usr/lib/arm-linux-gnueabihf/libcrypto.so
    -- LibCrypto Static Lib:  /tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/lib/libcrypto.a
    -- Configuring done
    CMake Error at CMakeLists.txt:191 (add_library):
      Target "s2n" links to target "LibCrypto::Crypto" but the target was not
      found.  Perhaps a find_package() call is missing for an IMPORTED target, or
      an ALIAS target is missing?


    CMake Error at CMakeLists.txt:239 (target_include_directories):
      Error evaluating generator expression:

        $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

      Target "LibCrypto::Crypto" not found.


    CMake Error at CMakeLists.txt:239 (target_include_directories):
      Error evaluating generator expression:

        $<TARGET_PROPERTY:LibCrypto::Crypto,INTERFACE_INCLUDE_DIRECTORIES>

      Target "LibCrypto::Crypto" not found.


    CMake Error at CMakeLists.txt:191 (add_library):
      Target "s2n" links to target "LibCrypto::Crypto" but the target was not
      found.  Perhaps a find_package() call is missing for an IMPORTED target, or
      an ALIAS target is missing?


    -- Generating done
    CMake Generate step failed.  Build files cannot be regenerated correctly.
    Traceback (most recent call last):
      File "<string>", line 1, in <module>
      File "/tmp/pip-install-wejvufi4/awscrt/setup.py", line 263, in <module>
        'boto3'
      File "/usr/lib/python3/dist-packages/setuptools/__init__.py", line 145, in setup
        return distutils.core.setup(**attrs)
      File "/usr/lib/python3.7/distutils/core.py", line 148, in setup
        dist.run_commands()
      File "/usr/lib/python3.7/distutils/dist.py", line 966, in run_commands
        self.run_command(cmd)
      File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
        cmd_obj.run()
      File "/usr/lib/python3/dist-packages/setuptools/command/install.py", line 61, in run
        return orig.install.run(self)
      File "/usr/lib/python3.7/distutils/command/install.py", line 589, in run
        self.run_command('build')
      File "/usr/lib/python3.7/distutils/cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
        cmd_obj.run()
      File "/usr/lib/python3.7/distutils/command/build.py", line 135, in run
        self.run_command(cmd_name)
      File "/usr/lib/python3.7/distutils/cmd.py", line 313, in run_command
        self.distribution.run_command(command)
      File "/usr/lib/python3.7/distutils/dist.py", line 985, in run_command
        cmd_obj.run()
      File "/tmp/pip-install-wejvufi4/awscrt/setup.py", line 179, in run
        self._build_dependency(lib)
      File "/tmp/pip-install-wejvufi4/awscrt/setup.py", line 162, in _build_dependency
        subprocess.check_call(cmake_args)
      File "/usr/lib/python3.7/subprocess.py", line 347, in check_call
        raise CalledProcessError(retcode, cmd)
    subprocess.CalledProcessError: Command '['cmake', '-DCMAKE_PREFIX_PATH=/tmp/pip-install-wejvufi4/awscrt/build/deps/install', '-DCMAKE_INSTALL_PREFIX=/tmp/pip-install-wejvufi4/awscrt/build/deps/install', '-DBUILD_SHARED_LIBS=OFF', '-DCMAKE_BUILD_TYPE=RelWithDebInfo', '-DBUILD_TESTING=OFF', '-DCMAKE_INCLUDE_PATH="/usr/include/python3.7m"', '-DLibCrypto_INCLUDE_DIR=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/include', '-DLibCrypto_STATIC_LIBRARY=/tmp/pip-install-wejvufi4/awscrt/build/deps/libcrypto/lib/libcrypto.a', '/tmp/pip-install-wejvufi4/awscrt/crt/s2n']' returned non-zero exit status 1.

    ----------------------------------------
Command "/usr/bin/python3 -u -c "import setuptools, tokenize;__file__='/tmp/pip-install-wejvufi4/awscrt/setup.py';f=getattr(tokenize, 'open', open)(__file__);code=f.read().replace('\r\n', '\n');f.close();exec(compile(code, __file__, 'exec'))" install --record /tmp/pip-record-cg6etnjd/install-record.txt --single-version-externally-managed --compile --user --prefix=" failed with error code 1 in /tmp/pip-install-wejvufi4/awscrt/

मुझे भी यह समस्या हो रही है और मेरा कोडबिल्ड बिल्ड प्रोजेक्ट अब विफल हो गया है (py 3.8), मैंने इस मुद्दे को पहले से ही awscrt रेपो https://github.com/awslabs/aws-crt-python/issues/192 पर पोस्ट कर दिया है।

अजगर के साथ रास्पबेरी 3 मॉडल बी के साथ एक ही मुद्दा। v1.5 . पर वापस आ जाएगा

@ alozano-77 हाँ, मैं भी अभी के लिए 1.5.0 पर वापस लुढ़क गया, जब यह तय हो जाएगा तो फिर से आ जाएगा

हमने हाल ही में सेमेक लिबक्रिप्टो फाइंडर को रिफैक्टर किया और मुझे संदेह है कि यह उससे संबंधित है, एक नज़र रखने के लिए टीम तक पहुंच जाएगा। आपकी परेशानी के लिए खेद है।

यह 1.5.2 . में तय किया गया है

️टिप्पणी दृश्यता चेतावनी⚠️

बंद मुद्दों पर टिप्पणियाँ हमारी टीम के लिए देखना कठिन है।
यदि आपको अधिक सहायता की आवश्यकता है, तो कृपया या तो टीम के किसी सदस्य को टैग करें या एक नया मुद्दा खोलें जो इसका संदर्भ देता हो।
यदि आप इस मुद्दे के तहत अन्य समुदाय के सदस्यों के साथ बातचीत जारी रखना चाहते हैं तो ऐसा करने में संकोच न करें।