Mopidy: [ヘルプ] Modipy:コマンドが見つかりません

作成日 2014年12月29日  ·  15コメント  ·  ソース: mopidy/mopidy

fly@raspberry-pi:/$ sudo apt-get install modipy
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package modipy
fly@raspberry-pi:/$ modipy
-bash: modipy: command not found

私のラズベリーパイにそれをインストールしようとしている間...

最も参考になるコメント

それはモディピーではなくモディピーです
2014年12月29日19:02、「RonanNello」 [email protected]は次のように書いています。

私がここで尋ねるなら、それは私がすでにそれをしたということです...


このメールに直接返信するか、GitHubで表示してください
https://github.com/mopidy/mopidy/issues/925#issuecomment-68286653

全てのコメント15件

mopidy aptリポジトリを追加し、パッケージインデックスを更新します。
https://docs.mopidy.com/en/latest/installation/debian/#debian-installを参照して

...私はすでにこれをしました、私はそうでないかどうか尋ねません。

fly@raspberry-pi:/$ sudo apt-get update
Hit http://archive.raspbian.org wheezy Release.gpg
Hit http://archive.raspbian.org wheezy Release     
Hit http://apt.mopidy.com stable Release.gpg       
Hit http://archive.raspbian.org wheezy/main Sources
Hit http://apt.mopidy.com stable Release
Hit http://archive.raspbian.org wheezy/contrib Sources            
Hit http://archive.raspbian.org wheezy/non-free Sources           
Hit http://archive.raspbian.org wheezy/main armhf Packages        
Hit http://archive.raspbian.org wheezy/contrib armhf Packages     
Hit http://archive.raspbian.org wheezy/non-free armhf Packages    
Hit http://apt.mopidy.com stable/main Sources
Hit http://apt.mopidy.com stable/contrib Sources
Hit http://apt.mopidy.com stable/non-free Sources                
Hit http://apt.mopidy.com stable/main armhf Packages             
Hit http://apt.mopidy.com stable/contrib armhf Packages          
Hit http://apt.mopidy.com stable/non-free armhf Packages         
Ign http://archive.raspbian.org wheezy/contrib Translation-en_US 
Ign http://archive.raspbian.org wheezy/contrib Translation-en    
Ign http://archive.raspbian.org wheezy/main Translation-en_US    
Ign http://archive.raspbian.org wheezy/main Translation-en       
Ign http://archive.raspbian.org wheezy/non-free Translation-en_US
Ign http://archive.raspbian.org wheezy/non-free Translation-en   
Ign http://apt.mopidy.com stable/contrib Translation-en_US       
Ign http://apt.mopidy.com stable/contrib Translation-en
Ign http://apt.mopidy.com stable/main Translation-en_US
Ign http://apt.mopidy.com stable/main Translation-en
Ign http://apt.mopidy.com stable/non-free Translation-en_US
Ign http://apt.mopidy.com stable/non-free Translation-en
Reading package lists... Done                                                  
fly@raspberry-pi:/$ sudo apt-get install modipy
Reading package lists... Done
Building dependency tree       
Reading state information... Done
E: Unable to locate package modipy
fly@raspberry-pi:/$ 

実際、10分前にインストールしたばかりですが、今は何かがめちゃくちゃになっています...

それはモディピーではなくモディピーです
2014年12月29日19:02、「RonanNello」 [email protected]は次のように書いています。

私がここで尋ねるなら、それは私がすでにそれをしたということです...


このメールに直接返信するか、GitHubで表示してください
https://github.com/mopidy/mopidy/issues/925#issuecomment-68286653

私の恥:(

MDPは私を混乱させました..

心配ありません、簡単にできます:)
2014年12月29日19:08、「RonanNello」 [email protected]は次のように書いています。

私の恥:(


このメールに直接返信するか、GitHubで表示してください
https://github.com/mopidy/mopidy/issues/925#issuecomment-68288210

誰かが別のmpdを実行してmodipyを使用する方法を知っていますか?
mpdの音楽を使ってSpotifyもしたいです

MopidyとMPDを2つの異なるポートで実行するだけです。 デフォルトでは、どちらもTCPポート6600を使用しようとします。

うん、それは私が現在していることですが、私は別の方法があるのだろうかと思っていました:)

音声がありません...

fly@raspberry-pi:/$ mopidy
INFO     Starting Mopidy 0.19.5
INFO     Loading config from: builtin defaults, /etc/xdg/mopidy/mopidy.conf, /home/fly/.config/mopidy/mopidy.conf, command line options
INFO     Enabled extensions: spotify, mpd, softwaremixer, stream
INFO     Disabled extensions: local, http
INFO     Starting Mopidy mixer: SoftwareMixer
INFO     Mixing using GStreamer software mixing
INFO     Starting Mopidy audio
INFO     Starting Mopidy backends: SpotifyBackend, StreamBackend
INFO     Mopidy uses SPOTIFY(R) CORE
INFO     Audio output set to "alsasink"
INFO     Starting Mopidy core
INFO     Starting Mopidy frontends: MpdFrontend
INFO     MPD server running at [::ffff:192.168.1.99]:6601
INFO     Connected to Spotify
INFO     New MPD connection from [::ffff:192.168.1.26]:45326
INFO     Loaded 13 Spotify playlists
ERROR    GStreamer error: state change failed and some element failed to post a proper error message with the reason for the failure. Debug message: gstplaysink.c(1899): gen_audio_chain (): /GstPlayBin2:playbin20/GstPlaySink:playsink0

または、mopidyを使用してローカルメディアも管理します。 設定するだけ
ローカルバックエンド。 そして、mpdの使用を完全に停止します(ただし、mpdに注意してください)
特に低電力システムでパフォーマンスが向上します)。
2014年12月29日19:13、「RonanNello」 [email protected]は次のように書いています。

誰かが別のmpdを実行してmodipyを使用する方法を知っていますか?
mpdの音楽を使ってSpotifyもしたいです


このメールに直接返信するか、GitHubで表示してください
https://github.com/mopidy/mopidy/issues/925#issuecomment-68289719

ラズベリーパイの速度が良いかどうかは後でわかります:)
しかし今のところmpdはうまく機能し、modipyは何も再生できません...

正直に言うと、ラズベリーパイでは良くありません。 そして、それはモピッドです!
2014年12月29日19:28、「RonanNello」 [email protected]は次のように書いています。

ラズベリーパイの速度が良いかどうかは後でわかります:)
しかし今のところmpdはうまく機能し、modipyは何も再生できません...


このメールに直接返信するか、GitHubで表示してください
https://github.com/mopidy/mopidy/issues/925#issuecomment-68293407

しかし、公平を期すために、すべてのメディアを1つのサーバーに置くことは素晴らしいことであり、それでもなお
完全に使用可能。 特にあなたが賢明な検索をするなら。 あなたが持っている場合
問題は、いつでもpiオルゴールの既製の画像を使用できます。
2014年12月29日19:30、「 NickSteel

正直に言うと、ラズベリーパイでは良くありません。 そして、それはモピッドです!
2014年12月29日19:28、「RonanNello」 [email protected]は次のように書いています。

ラズベリーパイの速度が良いかどうかは後でわかります:)
しかし今のところmpdはうまく機能し、modipyは何も再生できません...


このメールに直接返信するか、GitHubで表示してください
https://github.com/mopidy/mopidy/issues/925#issuecomment-68293407

私は自分でそれをすることを好みます、私はそれに欲しいパッケージだけを備えた軽量のDebianイメージを持っています。

今後、サポートリクエストにはhttps://discuss.mopidy.com/を使用し、mopidyの実際のバグには課題追跡システムのみを使用するようにしてください:-)

このページは役に立ちましたか?
0 / 5 - 0 評価