https://www.arduino.cc/en/ArduinoAtHeart/Products
The "Shop AtHeart products on our Store." link points to:
https://store.arduino.cc/category/84~~
https://store.arduino.cc/atheart
but that just dumps me to the Arduino Store homepage.
The correct link (for USA region) is:
https://store.arduino.cc/usa/atheart
EDIT 2017-09-13: The link has been updated but the issue remains.
Change:
>Below the official AtHeart products.
to:
~~>Below are the official AtHeart products. ~~
Change:
>In the heart of MicroView there is an ATMEL’s ATmega328P
to:
>In the heart of MicroView there is an Atmel ATmega328P
www.microview.io gives a "Server not found" error
Change:
>- ATMega328 clocked at 8 or 16 MHz
>- ATMega1280 clocked at 16 MHz
>- ATMega2560 clocked at 16 MHz
~~>- ATMega32U4 at 8 or 16 MHz ~~
~~>- ATMega64M1 at 16 Mhz ~~
to:
>- ATmega328P clocked at 8 or 16 MHz
>- ATmega1280 clocked at 16 MHz
>- ATmega2560 clocked at 16 MHz
~~>- ATmega32U4 at 8 or 16 MHz ~~
~~>- ATmega64M1 at 16 Mhz ~~
Also: what about ATmega168 and ATtiny85 (or ATmega8 if you want to get really complete)?
For more information about the AtHeart program please contact at_heart [at] arduino.cc
The non-obfuscated email address is shown at the top of the page so I don't think this has any value for spam prevention.
EDIT 2017-09-13: The issue has been partially resolved and I have struck out those items. The non-struck out items remain unresolved.
Thank you @per1234
Fixed.
@kengdahl, the link Shop AtHeart products on our Store., although updated, still dumps me in the store home page. https://store.arduino.cc/usa/atheart does take me to the right store section. I would expect the store to be able to take the non-regional URL and convert it to the correct regional URL, as it does for product pages (e.g. https://store.arduino.cc/arduino-uno-rev3 redirects to https://store.arduino.cc/usa/arduino-uno-rev3) but apparently this doesn't work for store sections. Maybe that's a separate issue that should be reported and the link on the AtHeart page can be left as-is in the hopes that it will eventually work?
I'm reopening the issue. I'll look further into this with our main admin.
The link to the atheart products should work now. Better late than never, right :)