Machine: Die Maschine besteht darauf, Zertifikate zu regenerieren, die gültig sein sollten
Installierte Maschine 0.5 über Toolbox 1.9.0.
docker is configured to use the default machine with IP 192.168.99.100
For help getting started, check out the docs at https://docs.docker.com
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": dial tcp 192.168.99.100:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
amylindburg
Alle 55 Kommentare
Ich habe auch solche Probleme gesehen (obwohl meine mit Schwarm waren) und ich denke, es hat damit zu tun, dass der Dialer fehlerhaft ist. Die IP-Adresse sollte vollständig erreichbar sein, daher bin ich mir nicht sicher, was hier los ist. cc @ docker / Maschinenbetreuer
nathanleclaire
am 4. Nov. 2015
Unter Arch Linux bin ich auf dasselbe gestoßen.
Bearbeiten: Ein Downgrade auf 0.4.1 behebt dies für mich.
vikstrous
am 5. Nov. 2015
Auch das erleben. Ich habe es gleich nach dem Aktualisieren der Toolbox und auch heute Morgen nach dem Booten meines Computers erhalten.
Das Stoppen und Starten der VM verursacht das Problem nicht.
Wenn Sie docker-machine regenerate-certs <name> ausführen, können Sie wieder loslegen.
sjparkinson
am 5. Nov. 2015
Der Neustart des Host-Betriebssystems (in meinem Fall osx) hat bei mir funktioniert.
sqpdln
am 9. Nov. 2015
fwiw Ich habe solche "certs" -Fehler auf verschiedenen Docker 1.9-Servern (boot2docker, debian) festgestellt. Aber ich denke, das Problem ist nur, dass der Docker-Server nicht startet - wenn ich docker.log überprüfe, werden Meldungen wie unten angezeigt.
time="2015-11-13T18:20:36.304725934Z" level=fatal msg="Error starting daemon: Error initializing network controller: could not delete the default bridge network: network bridge has active endpoints"
Wenn Sie auf dem Docker-Server ein rm -rf /var/lib/docker/network ausführen, wie unter https://github.com/docker/docker/issues/17846 vorgeschlagen, und das System neu starten, wird das Problem für mich behoben.
jamshid
am 13. Nov. 2015
Interessant, danke für den Bericht @jamshid.
nathanleclaire
am 13. Nov. 2015
Ich hatte den gleichen Fehler, nachdem ich unter Arch Linux von 0.3 auf 0.5 aktualisiert und ein Remote-Docker aktualisiert hatte.
Der Remote-Docker-Daemon lief mit Sicherheit, da alle von mir gehosteten Sites noch aktiv waren.
Das Regenerieren der Zertifikate schlug fehl und sagte, dass ca.pem keine Datei oder kein Verzeichnis war.
Der Neustart der Entwicklungsmaschine hatte keine Auswirkungen.
0.4.1 installiert und wieder betriebsbereit.
JoshWillik
am 16. Nov. 2015
Es tut uns leid. Ich habe vergessen, dass der Download von 0.4.1 eine einzelne Binärdatei war ...
tdensmore
am 19. Nov. 2015
@tdensmore Das Downgrade hat folgendermaßen funktioniert:
git clone https://aur.archlinux.org/docker-machine.git
cd docker-machine
git checkout fa09daa8f85b31880b93 # Version 4.1.1
makepkg
pacman -U docker-machine-1:0.4.1-1-x86_64.pkg.tar.xz
Danke @JoshWillik
tdensmore
am 19. Nov. 2015
Ich habe dieses Problem unter Windows 10 mit einer Neuinstallation der Docker Toolbox.
C: \ Users \ gjstocker> Docker-Maschine env default
Fehler beim Ausführen der Verbindungs-Boilerplate: Fehler beim Überprüfen und / oder erneuten Generieren der Zertifikate: Es ist ein Fehler aufgetreten> beim Überprüfen der Zertifikate für den Host "192.168.99.100:2376": Remote-Fehler: Ungültiges Zertifikat
Sie können versuchen, sie mithilfe des Namens "Docker-Maschine regenerieren-Zertifikate" neu zu generieren.
Beachten Sie, dass dies einen Neustart des Docker-Daemons auslöst, bei dem keine Container mehr ausgeführt werden.
Weder das Ausführen dieses Befehls noch das Neustarten von Windows beheben dieses Problem. Ich verwende Windows 10 unter Parallels unter Mac OS X Yosemite. das hat übrigens auch Docker installiert.
gortok
am 25. Nov. 2015
Gleiches hier unter OS X Yosemite. Sogar das Ausführen des Befehls docker-machine regenerate-certs default gab mir den folgenden Fehler:
WARNING >>>
This machine has been allocated an IP address, but Docker Machine could not
reach it successfully.
SSH for the machine should still work, but connecting to exposed ports, such as
the Docker daemon port (usually <ip>:2376), may not work properly.
You may need to add the route manually, or use another related workaround.
This could be due to a VPN, proxy, or host file configuration issue.
Da wurde mir klar, dass ich tatsächlich in einem VPN war. Wenn Sie das ausschalten, funktioniert der Befehl zum Regenerieren einwandfrei. Müsste noch herausfinden, wie Docker mit eingeschaltetem VPN zum Laufen gebracht werden kann, kann aber vorerst auskommen. Hoffe das hilft
DrunkenBeetle
am 25. Nov. 2015
Ich habe dies seit dem Upgrade auf Docker 1.9 regelmäßig ausgeführt - anscheinend muss ich jedes Mal, wenn ich eine Docker-Maschine starte, Zertifikate neu generieren
lizrice
am 25. Nov. 2015
Hallo zusammen, es ist mir immer noch nicht gelungen, die "Bad Certs" -Version dieses Fehlers zu reproduzieren (ich dachte, ich hätte einen Vorsprung gehabt, aber es scheint sich als roter Hering herausgestellt zu haben). Bitte posten Sie die Ausgabe von:
$ docker-machine --debug env default
$ docker-machine --debug regenerate-certs -f default
wenn / wenn Sie eine Chance bekommen und dieser Fehler auftritt. Vielen Dank!
nathanleclaire
am 26. Nov. 2015
Los geht's - hoffe das hilft!
$ docker-machine --debug env betterrecs
Docker Machine Version: 0.5.0 (04cfa58)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:55238
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
(betterrecs) Calling RpcServerDriver.GetState
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) Calling RpcServerDriver.GetURL
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="6">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="7">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
(betterrecs) DBG |
Reading CA certificate from /Users/liz/.docker/machine/certs/ca.pem
Reading server certificate from /Users/liz/.docker/machine/machines/betterrecs/server.pem
Reading server key from /Users/liz/.docker/machine/machines/betterrecs/server-key.pem
shell: bash
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/liz/.docker/machine/machines/betterrecs"
export DOCKER_MACHINE_NAME="betterrecs"
# Run this command to configure your shell:
# eval "$(docker-machine --debug env betterrecs)"
$ docker-machine --debug regenerate-certs -f betterrecs
Docker Machine Version: 0.5.0 (04cfa58)
Regenerating TLS certificates
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:55279
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
command=configureAuth machine=betterrecs
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
cat /etc/os-release
SSH cmd err, output: <nil>: NAME=Boot2Docker
VERSION=1.9.0
ID=boot2docker
ID_LIKE=tcl
VERSION_ID=1.9.0
PRETTY_NAME="Boot2Docker 1.9.0 (TCL 6.4); master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015"
ANSI_COLOR="1;34"
HOME_URL="http://boot2docker.io"
SUPPORT_URL="https://github.com/boot2docker/boot2docker"
BUG_REPORT_URL="https://github.com/boot2docker/boot2docker/issues"
found compatible host: boot2docker
(betterrecs) Calling RpcServerDriver.GetMachineName
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /usr/bin/sethostname betterrecs && echo "betterrecs" | sudo tee /var/lib/boot2docker/etc/hostname
SSH cmd err, output: <nil>: Setting hostname to betterrecs Done.
betterrecs
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55283 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17374 /var/lib/docker/network/files/88373595910d3af10ee42387d0e36e63da4c6ebb7c0898d4170f8b1a37053d16.sock
unix 2 [ ACC ] STREAM LISTENING 17292 /var/run/docker.sock
unix 2 [ ACC ] STREAM LISTENING 17040 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 18497
unix 3 [ ] STREAM CONNECTED 18496
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo mkdir -p /var/lib/boot2docker
SSH cmd err, output: <nil>:
(betterrecs) Calling RpcServerDriver.GetMachineName
(betterrecs) Calling RpcServerDriver.GetIP
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="8">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
Copying certs to the local machine directory...
(betterrecs) DBG |
generating server cert: /Users/liz/.docker/machine/machines/betterrecs/server.pem ca-key=/Users/liz/.docker/machine/certs/ca.pem private-key=/Users/liz/.docker/machine/certs/ca-key.pem org=liz.betterrecs
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker stop
SSH cmd err, output: <nil>:
Copying certs to the remote machine...
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/ca.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/server.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----
MIIDDDCCAfSgAwIBAgIQCJXh6vbXgaubXUnlGTqq/zANBgkqhkiG9w0BAQsFADAO
MQwwCgYDVQQKEwNsaXowHhcNMTUxMTI3MTAzMjAwWhcNMTgxMTExMTAzMjAwWjAZ
MRcwFQYDVQQKEw5saXouYmV0dGVycmVjczCCASIwDQYJKoZIhvcNAQEBBQADggEP
ADCCAQoCggEBANFZj45YMn7n6rgOqz9MyjLrJXeQYBkXi5HtQx55noMld0DIcJZI
pI+xHGD68IbuxB/jVQDQPx+7pXia3mOq7bSfEA9mtvA9nHmM7Rjc0JzlHF2ohvSs
8B2XDNTeEKltxICDlL2kuyEMhu7sl771iTq2SsCy8ADVvVVR1MTwH3ovxoDAXW1A
NzeDmZZWpC/60BrIhFkibreJni136gxxWXkEODJdlcxURuVHDd1VMCfoX3nLY2qD
OUI2bHUSyvhqlBHQXKcNIm+ElOv2TensF2tw/zQ0jNbV9RNivirrLupO4Yl3Q1tH
49SRqJHB5dCYRPb5xJ9U8haoD78RLkSisisCAwEAAaNbMFkwDgYDVR0PAQH/BAQD
AgOoMB0GA1UdJQQWMBQGCCsGAQUFBwMCBggrBgEFBQcDATAMBgNVHRMBAf8EAjAA
MBoGA1UdEQQTMBGCCWxvY2FsaG9zdIcEwKhjZDANBgkqhkiG9w0BAQsFAAOCAQEA
Ua8U4kyuVIeZkGfEpgE/x36milmRiYv6Kr5jzo5fFTXg4Swi/aYpgkvXQsfoe9U/
oiE+rcRjUF94r60UAIPNTRSNQvfDbkO5G/31WRGBzTIlw2Iwg4QVVI/itj55Wm91
dTJy4w51Alz8cl4NSGqGuH3kHXceqD6hRMwygVww61trIKCwr/hYVia8eyCOn6tU
wy6KzHs7FQw5q4MZeXyuPEttnpmM0r0gUnVKT8DnMSagdZ2/+i8wgzeyZ4UEYh5V
JSoUrAGjIMs1ilYTZTwhISBIUTtJytRLV/55QKaCN2rD0E0B633G6cQgP/ACPA1/
A9BL9ks5uH4DZx721WKH9Q==
-----END CERTIFICATE-----
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
' | sudo tee /var/lib/boot2docker/server-key.pem
SSH cmd err, output: <nil>: -----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
(betterrecs) Calling RpcServerDriver.GetURL
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="9">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) Calling RpcServerDriver.DriverName
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
(betterrecs) DBG |
Setting Docker configuration on the remote daemon...
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf %s "
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
" | sudo tee /var/lib/boot2docker/profile
SSH cmd err, output: <nil>:
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker start
SSH cmd err, output: <nil>: Need TLS certs for betterrecs,127.0.0.1,10.0.2.15,192.168.99.100
-------------------
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55283 TIME_WAIT
tcp 36 0 10.0.2.15:ssh 10.0.2.2:55293 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17040 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 19069
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 19070
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55295 ESTABLISHED
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55283 TIME_WAIT
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 19165 /var/lib/docker/network/files/f05a6ec02bfcb2b05f6cd8ba3e2063a24fe362e6f85258d4878343ce26775030.sock
unix 2 [ ACC ] STREAM LISTENING 17040 /var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 19098 /var/run/docker.sock
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 19278
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 19279
(betterrecs) Calling RpcServerDriver.GetIP
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="10">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
(betterrecs) DBG |
(betterrecs) Calling RpcServerDriver.GetConfigRaw
(betterrecs) Calling RpcServerDriver.GetConfigRaw
Danke @lizrice
nathanleclaire
am 30. Nov. 2015
Also @lizrice , um mein Verständnis zu bestätigen: Am Ende der Erstellung scheint alles in Ordnung zu sein, aber dann erstickt env mit der oben genannten Fehlermeldung? Und regenerate-certs behebt es?
EDIT : Sieht aus wie die oben aufgeführten env ist gesund. Können Sie die Debug-Ausgabe eines fehlgeschlagenen Aufrufs von env ?
nathanleclaire
am 30. Nov. 2015
ja das ist es
Am Montag, 30. November 2015 um 22:39 Uhr, Nathan LeClaire [email protected]
schrieb:
Also @lizrice https://github.com/lizrice , um mein Verständnis zu bestätigen: at
Am Ende der Erstellung scheint alles gut zu gehen, aber dann erstickt env
mit der oben genannten Fehlermeldung? Und regenerate-certs behebt es?- -
Antworte direkt auf diese E-Mail oder sieh sie dir auf GitHub an
https://github.com/docker/machine/issues/2175#issuecomment -160784509.
lizrice
am 1. Dez. 2015
Ich habe das gleiche Problem, außer dass regenerate-certs das Problem nicht behebt. Ich kann die Ausgabe dieser Befehle für meinen Computer einfügen. Aber sind diese Zertifikatsschlüssel private oder öffentliche Schlüssel?
gortok
am 1. Dez. 2015
Hatte das gleiche Problem auf osx. Das Regenerieren der Zertifikate hat nicht funktioniert:
Diesem Computer wurde eine IP-Adresse zugewiesen, Docker Machine jedoch nicht
erreichen Sie es erfolgreich.
SSH für den Computer sollte weiterhin funktionieren, aber eine Verbindung zu exponierten Ports herstellen, z
der Docker-Daemon-Port (normalerweise
Möglicherweise müssen Sie die Route manuell hinzufügen oder eine andere verwandte Problemumgehung verwenden.
Dies kann an einem Konfigurationsproblem mit VPN, Proxy oder Hostdatei liegen.
Es sah so aus, als ob die Route zur Box nicht richtig konfiguriert war. Das Erstellen einer neuen Docker-Maschine hat ebenfalls nicht funktioniert. Das Erstellen eines neuen Computers mit vmwarefusion funktionierte jedoch ordnungsgemäß.
pachuc
am 1. Dez. 2015
Ein Neustart meines Computers behebt auch das Problem.
pachuc
am 1. Dez. 2015
@gortok Private, möchte sie möglicherweise vor dem Posten entfernen.
nathanleclaire
am 2. Dez. 2015
@ Lizrice Ich verstehe nicht. Der Befehl env in Ihrem veröffentlichten Beispiel spuckt aus, was ich erwarten würde, aber nicht die Fehlermeldung "Verbindungs-Boilerplate".
nathanleclaire
am 2. Dez. 2015
Ich werde das nächste Mal, wenn ich das sehe, noch einmal nachsehen, aber ich glaube, ich habe etwas gepostet
alles was ich habe
Am Mittwoch, 2. Dezember 2015, um 01:19 Uhr, Nathan LeClaire [email protected]
schrieb:
@lizrice https://github.com/lizrice Ich verstehe nicht. Der Befehl env
in deinem geposteten Beispiel spuckt aus, was ich erwarten würde, aber nicht das
Fehlermeldung "Verbindungskesselplatte".- -
Antworte direkt auf diese E-Mail oder sieh sie dir auf GitHub an
https://github.com/docker/machine/issues/2175#issuecomment -161148632.
lizrice
am 2. Dez. 2015
Hilft das?
$ docker-machine start force12
Started machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
$ docker-machine env force12
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": x509: certificate is valid for 192.168.99.101, not 192.168.99.100
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
$ docker-machine regenerate-certs force12
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): y
Regenerating TLS certificates
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
$ docker-machine env force12
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/liz/.docker/machine/machines/force12"
export DOCKER_MACHINE_NAME="force12"
# Run this command to configure your shell:
# eval "$(docker-machine env force12)"
@lizrice Closer - Ich benötige diesen zweiten Befehl, der die Meldung "Fehler beim Ausführen der Verbindungs-Boilerplate" druckte und mit aktiviertem --debug , damit ich genauer untersuchen kann, was passiert.
nathanleclaire
am 3. Dez. 2015
Hallo @nathanleclaire
Ich habe dieses Problem ebenso wie heute Morgen.
Hier ist meine Umgebung:
$ dm --version
dm version 0.5.2 ( 0456b9f )
$ docker --version
Docker version 1.9.0, build 76d6bc9
$ VirtualBox --help
Oracle VM VirtualBox Manager 5.0.10
$ system_profiler SPSoftwareDataType
Software:
System Software Overview:
System Version: OS X 10.10.5 (14F1021)
Kernel Version: Darwin 14.5.0
Hier sind die Fehler, die beim Versuch auftreten, die Docker-Hostumgebung zu bewerten
$ dm ls
NAME ACTIVE DRIVER STATE URL SWARM ERRORS
dev - virtualbox Running tcp://192.168.99.100:2376
$ dm env dev
Error checking TLS connection: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": dial tcp 192.168.99.100:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs [name]'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
$ docker-machine regenerate-certs dev
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): y
Regenerating TLS certificates
Detecting the provisioner...
Unable to verify the Docker daemon is listening: Maximum number of retries (5) exceeded
Beweis, dass der Docker-Host aktiv ist
$ docker-machine ssh dev
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
_ _ ____ _ _
| |__ ___ ___ | |_|___ \ __| | ___ ___| | _____ _ __
| '_ \ / _ \ / _ \| __| __) / _` |/ _ \ / __| |/ / _ \ '__|
| |_) | (_) | (_) | |_ / __/ (_| | (_) | (__| < __/ |
|_.__/ \___/ \___/ \__|_____\__,_|\___/ \___|_|\_\___|_|
Boot2Docker version 1.9.0, build master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015
Docker version 1.9.0, build 76d6bc9
docker<strong i="15">@dev</strong>:~$
Und hier ist die Ausgabe der Befehle , die Sie verweisen hier
Link zum Gist mit Ausgabe => https://gist.github.com/Dangeranger/4f139d7acf530f6c4ec0)
Dangeranger
am 3. Dez. 2015
UPDATE: @nathanleclaire
Durch Ausführen der folgenden Schritte wurde das Problem bei der Auswertung der Docker-Host-Umgebung behoben.
Aus dieser Antwort von https://github.com/chiavegatto in https://github.com/docker/docker/issues/17846
https://github.com/docker/docker/issues/17846#issuecomment -155233858
$ docker-machine ssh dev
Boot2Docker version 1.9.0, build master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015
Docker version 1.9.0, build 76d6bc9
$ sudo -i
$ rm -rf /var/lib/docker/network
# exit from the Docker host and then run
$ docker-machine env dev
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/mansfield/.docker/machine/machines/dev"
export DOCKER_MACHINE_NAME="dev"
# Run this command to configure your shell:
# eval "$(dm env dev)"
: confetti_ball :: boom :: +1:
Viel Glück!
Dangeranger
am 3. Dez. 2015
@Dangeranger Aber ist die Route erreichbar? dh können Sie ping 192.168.99.100 ?
EDIT :
nathanleclaire
am 3. Dez. 2015
@ Nathanleclaire Ja in der Tat!
$ docker-machine env dev
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/mansfield/.docker/machine/machines/dev"
export DOCKER_MACHINE_NAME="dev"
$ ping -c 3 192.168.99.100
PING 192.168.99.100 (192.168.99.100): 56 data bytes
64 bytes from 192.168.99.100: icmp_seq=0 ttl=64 time=0.219 ms
64 bytes from 192.168.99.100: icmp_seq=1 ttl=64 time=0.423 ms
64 bytes from 192.168.99.100: icmp_seq=2 ttl=64 time=0.387 ms
--- 192.168.99.100 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.219/0.343/0.423/0.089 ms
Wenn dies ein separates Problem ist, entschuldige ich mich;
Ich muss jedes Mal Zertifikate neu generieren, wenn Docker-Maschine stoppt und Docker-Maschine eine mit dem AWS-Treiber erstellte Maschine startet. Dies scheint damit zu tun zu haben, dass die Docker-Maschine die IP-Adressen ändert. Seltsam. Eine IP-Änderung sollte sicherlich unterstützt werden.
docker-machine --debug env docker-machine-`hostname`
Docker Machine Version: 0.5.2 ( 0456b9f )
Found binary path at /usr/local/bin/docker-machine-driver-amazonec2
Launching plugin server for driver amazonec2
Plugin server listening at address 127.0.0.1:58207
() Calling .GetVersion
Using API Version 1
() Calling .SetConfigRaw
() Calling .GetMachineName
(docker-machine-12cu-acceptatie) Calling .GetState
(docker-machine-12cu-acceptatie) DBG | Making AWS API call with values:
(docker-machine-12cu-acceptatie) DBG | {
(docker-machine-12cu-acceptatie) DBG | "Action": [
(docker-machine-12cu-acceptatie) DBG | "DescribeInstances"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "InstanceId.1": [
(docker-machine-12cu-acceptatie) DBG | "i-fe0abf42"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "Version": [
(docker-machine-12cu-acceptatie) DBG | "2014-06-15"
(docker-machine-12cu-acceptatie) DBG | ]
(docker-machine-12cu-acceptatie) DBG | }
(docker-machine-12cu-acceptatie) Calling .GetURL
(docker-machine-12cu-acceptatie) DBG | Making AWS API call with values:
(docker-machine-12cu-acceptatie) DBG | {
(docker-machine-12cu-acceptatie) DBG | "Action": [
(docker-machine-12cu-acceptatie) DBG | "DescribeInstances"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "InstanceId.1": [
(docker-machine-12cu-acceptatie) DBG | "i-fe0abf42"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "Version": [
(docker-machine-12cu-acceptatie) DBG | "2014-06-15"
(docker-machine-12cu-acceptatie) DBG | ]
(docker-machine-12cu-acceptatie) DBG | }
Reading CA certificate from /var/lib/jenkins/.docker/machine/certs/ca.pem
Reading server certificate from /var/lib/jenkins/.docker/machine/machines/docker-machine-12cu-acceptatie/server.pem
Reading server key from /var/lib/jenkins/.docker/machine/machines/docker-machine-12cu-acceptatie/server-key.pem
Error checking TLS connection: Error checking and/or regenerating the certs: There was an error validating certificates for host "52.29.84.243:2376": x509: certificate is valid for 52.28.126.68, not 52.29.84.243
You can attempt to regenerate them using 'docker-machine regenerate-certs [name]'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
Beachten Sie das:
There was an error validating certificates for host "52.29.84.243:2376": x509: certificate is valid for 52.28.126.68, not 52.29.84.243
tijszwinkels
am 7. Dez. 2015
Ich glaube, ich habe das Problem gefunden (aber noch nicht unbedingt die Lösung).
docker-machine -v
docker-machine version 0.5.2 ( 0456b9f )
Dies ist ein Arbeitszertifikat, das beim Neustart nicht neu generiert werden muss:
generiert mit: openssl x509 -in
Certificate:
Data:
Version: 3 (0x2)
Serial Number:
6e:c0:e7:43:47:6c:b7:55:db:35:96:da:d6:93:ec:cd
Signature Algorithm: sha256WithRSAEncryption
Issuer: O=jenkins
Validity
Not Before: Dec 7 14:01:00 2015 GMT
Not After : Nov 21 14:01:00 2018 GMT
Subject: O=jenkins.docker-machine-12cu-acceptatie
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
Public-Key: (2048 bit)
Modulus:
00:a4:3f:9a:1b:d7:cb:c1:03:ee:a2:ed:af:3b:a0:
b3:81:7c:ed:44:bf:a4:e6:46:54:ea:a4:64:a3:1e:
a9:52:f4:81:09:36:07:76:79:28:fb:3c:6f:bb:32:
32:16:57:29:f6:d0:4e:9f:52:0f:b0:4f:c7:82:81:
19:83:37:f3:b7:8a:96:bf:70:e9:4b:e1:17:b5:5a:
38:75:c4:8a:2c:f4:63:03:ab:9a:13:c3:f1:89:6c:
f2:8f:90:55:5e:3d:8c:6a:b7:75:14:7f:75:a4:d5:
70:0d:3a:28:cd:ab:b7:b5:4a:6e:3d:cb:fb:a1:9a:
ee:f2:c3:4f:7d:50:60:e9:06:9c:bf:cb:77:75:ba:
79:97:07:92:0a:02:00:99:f3:56:b0:49:f3:57:9d:
a8:60:9c:b2:d4:e4:68:aa:13:f6:84:50:fd:f5:a7:
8d:53:37:ba:04:2b:1b:25:df:43:a4:7c:30:d5:d5:
93:f1:ca:d7:f8:ee:e0:0a:b2:4c:97:e1:d4:f1:2d:
c0:29:a9:11:55:bd:dc:6f:50:4b:cf:0a:cc:54:0e:
36:57:14:dc:36:2c:0b:40:72:97:0b:40:18:29:62:
18:e2:b0:c2:f8:de:0e:9e:21:c0:d5:b9:c3:38:17:
40:5a:7e:09:31:22:08:f8:27:19:00:61:a5:54:d1:
1c:87
Exponent: 65537 (0x10001)
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature, Key Encipherment, Key Agreement
X509v3 Extended Key Usage:
TLS Web Client Authentication, TLS Web Server Authentication
X509v3 Basic Constraints: critical
CA:FALSE
X509v3 Subject Alternative Name:
DNS:localhost, IP Address:52.28.126.68
Signature Algorithm: sha256WithRSAEncryption
16:4c:5b:4e:54:a8:4b:5a:5e:96:1e:8a:d6:9b:3b:07:dd:b5:
76:4e:6f:4b:71:e2:7c:68:76:d2:5a:6c:de:eb:b3:79:02:cb:
51:8d:f7:e3:f5:37:a4:32:4b:db:f2:3b:14:5b:7d:a0:9b:f2:
18:f7:00:6a:83:1e:40:34:11:ce:9c:40:5a:64:fa:4e:fb:1a:
52:0b:b0:4e:04:39:19:b3:a1:2c:fe:09:c0:7d:71:03:59:17:
74:90:da:4f:ff:40:c8:94:0d:39:b1:0b:26:a3:6c:b7:bb:c7:
c3:fc:c3:9a:86:78:9a:e0:90:df:cc:b9:7e:15:bc:dc:75:55:
de:0d:59:da:17:c7:e8:fa:38:12:e1:9e:a3:f2:05:15:2a:27:
73:f7:6f:84:7d:dd:34:8a:ee:99:b4:3d:5d:67:58:08:fd:70:
5c:0e:48:76:5a:6a:05:6f:45:49:2c:ad:be:d5:b7:1c:6f:18:
c9:2f:ed:83:06:40:a4:56:fc:a6:e9:e5:51:4f:bc:1e:e2:5d:
0f:31:53:8a:f9:95:b9:eb:29:f2:14:01:f9:d3:3f:0b:25:85:
86:1e:aa:d0:60:63:0e:4a:eb:f6:8d:6b:80:c5:0a:17:12:a2:
1f:bf:4c:36:35:19:69:cb:5d:5e:25:15:9d:37:bb:96:2a:b7:
dd:b2:d1:67
Dieses Zertifikat funktioniert nicht:
Certificate:
Data:
Version: 3 (0x2)
Serial Number:
b2:95:dc:b4:b4:6a:94:b9:ab:d3:58:a3:cc:5b:d9:6e
Signature Algorithm: sha256WithRSAEncryption
Issuer: O=tijs
Validity
Not Before: Oct 2 15:07:00 2015 GMT
Not After : Sep 16 15:07:00 2018 GMT
Subject: O=tijs
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (2048 bit)
Modulus (2048 bit):
00:a6:36:a3:dd:66:1e:8d:9c:8e:c0:43:78:ec:58:
25:a0:f9:a5:24:a8:45:1c:c6:b4:16:fa:81:39:20:
b9:79:23:e0:60:6b:f9:1d:af:80:6b:0c:8c:df:30:
50:66:75:06:9b:f1:78:33:83:9e:4b:bd:7a:44:d7:
d5:06:ce:07:af:52:1d:b3:e6:64:b7:a9:6a:61:e6:
25:e9:2a:85:03:89:17:8a:9c:f2:2a:ab:6f:56:ea:
ba:7e:da:03:b2:f1:8b:35:b3:41:35:91:44:b7:17:
bd:d2:41:27:43:22:cd:c0:e6:19:7b:98:48:bb:3a:
c4:2b:54:d9:48:48:18:02:3f:c5:c7:38:19:09:3f:
6a:eb:63:26:0c:83:62:92:99:a9:20:28:0f:70:73:
c5:c7:48:50:61:00:51:c1:48:d9:7d:05:98:02:55:
6a:c0:5b:70:0b:33:f9:78:dd:b8:d4:04:ae:bc:0c:
70:88:85:01:78:d5:15:09:6a:da:22:de:00:a3:38:
ac:2e:76:af:b2:47:50:c3:75:d9:22:6f:dd:05:09:
5e:15:fd:c8:b2:3c:e4:53:a5:e5:c2:ac:36:22:b6:
12:85:3b:33:55:70:25:9b:42:bc:fe:dc:39:aa:17:
18:04:88:aa:c9:e7:3e:09:7f:35:68:51:24:7d:b8:
01:79
Exponent: 65537 (0x10001)
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature
X509v3 Extended Key Usage:
TLS Web Client Authentication
X509v3 Basic Constraints: critical
CA:FALSE
Signature Algorithm: sha256WithRSAEncryption
35:5b:74:a6:99:9a:2f:f7:c3:f0:0f:53:b8:c1:cb:f9:9b:9a:
fa:3b:7b:f3:31:35:0c:c1:da:38:9f:1f:33:b4:b4:5c:68:77:
06:a1:bd:d5:8c:66:8a:7b:23:d0:4d:81:71:b7:13:cb:9e:17:
8d:32:a5:53:50:0c:48:f3:40:96:21:ab:30:7c:49:3c:ee:c3:
c7:3f:29:8f:ac:d4:3b:ce:d5:9d:8f:ad:0e:77:b9:ac:cf:1d:
51:f4:69:db:95:58:3f:98:14:96:73:f0:e5:f0:a8:f1:d8:fa:
39:13:73:f5:9d:3d:65:01:9f:e8:a6:39:7b:87:bb:c5:5a:50:
ec:50:3f:eb:7b:54:83:6f:b8:8e:a0:73:2d:9c:1f:b8:48:6a:
f7:98:97:4e:6e:7b:15:d1:33:10:00:e6:15:af:b3:40:20:d0:
3d:3b:c1:cd:1f:54:31:34:0c:cd:3b:e4:d6:68:d7:dd:8e:2f:
36:11:43:0f:e7:8f:c4:17:07:be:b5:3d:69:46:73:2e:24:c1:
77:fa:05:54:49:f8:13:58:83:3f:a6:13:f8:d7:15:5a:19:a2:
f3:3c:92:1a:00:de:86:c5:fb:6a:15:5c:98:30:77:64:d5:62:
39:32:43:68:67:26:f4:90:f0:67:81:98:d6:94:71:af:75:32:
1b:1b:4e:bf
Bitte beachten Sie die folgenden Abschnitte:
Arbeiten:
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature
X509v3 Extended Key Usage:
TLS Web Client Authentication
X509v3 Basic Constraints: critical
CA:FALSE
funktioniert nicht:
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature, Key Encipherment, Key Agreement
X509v3 Extended Key Usage:
TLS Web Client Authentication, TLS Web Server Authentication
X509v3 Basic Constraints: critical
CA:FALSE
X509v3 Subject Alternative Name:
DNS:localhost, IP Address:52.28.126.68
Es scheint, dass das zweite Zertifikat an eine bestimmte IP-Adresse ausgestellt wird. Hat sich in letzter Zeit etwas am Code zur Zertifikatserstellung geändert?
tijszwinkels
am 7. Dez. 2015
Mein Fehler scheint anders zu sein. In einigen Fällen sind meine Zertifikate auf den Schwarmknoten überhaupt nicht vorhanden.
Meine Schritte zur Reproduktion (Screenshots im Anhang):
- Erstellen Sie eine AWS-Instanz mit dem Namen 'docker-machine', um script.sh auszuführen
- script.sh erstellt den AWS-Schwarmcluster
Ich frage mich, ob mir etwas Offensichtliches fehlt?
Unten: Kein .docker-Verzeichnis für Zertifikate für 'root'-Benutzer
Unten: Kein .docker-Verzeichnis für Zertifikate für 'Ubuntu'-Benutzer
tdensmore
am 7. Dez. 2015
@tdensmore Die Zertifikate landen nicht auf $HOME/.docker auf den erstellten Instanzen. Sie landen in /etc/docker . Welche Symptome sehen Sie?
nathanleclaire
am 8. Dez. 2015
Danke @nathanleclaire . Ich werde / etc / docker überprüfen, wenn ich das nächste Mal meinen Stack ausführe. Die Symptome, die ich sehe (sorry, ich dachte, ich hätte das PNG in meinem ursprünglichen Kommentar hochgeladen), sind, dass docker-machine beschwert, dass die Zertifikate nach dem Erstellen des Schwarmclusters ungültig sind.
Siehe mein Bild unten.
tdensmore
am 8. Dez. 2015
[Entschuldigung für den doppelten Beitrag.] Ich bin nicht sicher, ob dies das gleiche Problem ist, aber ich kann dieses Problem zuverlässig reproduzieren, indem ich Folgendes ausführe:
$ docker-machine restart default && docker-machine env default
(default) OUT | Starting VM...
Restarted machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": dial tcp 192.168.99.100:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
Wenn ich jedoch die beiden Befehle _separately_ ausführe, funktioniert es in Ordnung:
$ docker-machine restart default
(default) OUT | Starting VM...
Restarted machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
$ docker-machine env default
(no error)
Der Fehler tritt auch auf, wenn die folgenden zwei Zeilen in eine Datei foo.sh :
docker-machine restart default
docker-machine env default
Und Renn:
$ source foo.sh
cjerdonek
am 10. Dez. 2015
@nathanleclaire Ich habe genau das gleiche Problem wie @tijszwinkels. Das Stoppen und Neustarten eines Computers mit dem AWS-Treiber löst dieses Problem aus. Gleiche Maschinenversion auch.
robvelor
am 10. Dez. 2015
Gleiches Problem hier nach dem Testen von Docker-Py .
Ständig reproduzieren wie:
LOOP START
→ dm ls
NAME ACTIVE DRIVER STATE URL SWARM
ddev * virtualbox Running tcp://192.168.99.101:2376
→ dm restart ddev
(ddev) OUT | Starting VM...
Restarted machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
→ docker start manage
manage
from docker.client import Client
from docker.utils import kwargs_from_env
kwargs = kwargs_from_env()
kwargs['tls'].assert_hostname = False
api = Client(**kwargs)
#: Exactly after I try to start an already created exec_create session
#: using the same (empty) generator object, api becomes unavailable
create = api.exec_create('manage', 'bash -c "ansible -c local -i localhost, all -m setup"')
start = api.exec_start(create['Id'], stream=True)
print [line for line in start]
start = api.exec_start(create['Id'], stream=True)
print [line for line in start]
create = api.exec_create('manage', 'bash -c "ansible -c local -i localhost, all -m setup"')
*** ConnectionError: HTTPSConnectionPool(host='192.168.99.101', port=2376): Max retries exceeded with url: /v1.21/containers/manage/exec (Caused by NewConnectionError('<requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x10fdba9d0>: Failed to establish a new connection: [Errno 61] Connection refused',))
LOOP END
→ docker-machine --debug env ddev
Docker Machine Version: 0.5.1 (HEAD)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:54243
() Calling RPCServerDriver.GetVersion
Using API Version 1
() Calling RPCServerDriver.SetConfigRaw
() Calling RPCServerDriver.GetMachineName
(ddev) Calling RPCServerDriver.GetState
(ddev) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo ddev --machinereadable
(ddev) DBG | STDOUT:
(ddev) DBG | {
(ddev) DBG | name="ddev"
(ddev) DBG | groups="/"
(ddev) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(ddev) DBG | UUID="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | CfgFile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.vbox"
(ddev) DBG | SnapFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Snapshots"
(ddev) DBG | LogFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Logs"
(ddev) DBG | hardwareuuid="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | memory=1024
(ddev) DBG | pagefusion="off"
(ddev) DBG | vram=8
(ddev) DBG | cpuexecutioncap=100
(ddev) DBG | hpet="on"
(ddev) DBG | chipset="piix3"
(ddev) DBG | firmware="BIOS"
(ddev) Calling RPCServerDriver.GetURL
(ddev) DBG | cpus=1
(ddev) DBG | pae="on"
(ddev) DBG | longmode="on"
(ddev) DBG | cpuid-portability-level=0
(ddev) DBG | bootmenu="disabled"
(ddev) DBG | boot1="dvd"
(ddev) DBG | boot2="dvd"
(ddev) DBG | boot3="disk"
(ddev) DBG | boot4="none"
(ddev) DBG | acpi="on"
(ddev) DBG | ioapic="on"
(ddev) DBG | biossystemtimeoffset=0
(ddev) DBG | rtcuseutc="on"
(ddev) DBG | hwvirtex="on"
(ddev) DBG | nestedpaging="on"
(ddev) DBG | largepages="on"
(ddev) DBG | vtxvpid="on"
(ddev) DBG | vtxux="on"
(ddev) DBG | paravirtprovider="default"
(ddev) DBG | VMState="running"
(ddev) DBG | VMStateChangeTime="2015-12-11T10:12:04.963000000"
(ddev) DBG | monitorcount=1
(ddev) DBG | accelerate3d="off"
(ddev) DBG | accelerate2dvideo="off"
(ddev) DBG | teleporterenabled="off"
(ddev) DBG | teleporterport=0
(ddev) DBG | teleporteraddress=""
(ddev) DBG | teleporterpassword=""
(ddev) DBG | tracing-enabled="off"
(ddev) DBG | tracing-allow-vm-access="off"
(ddev) DBG | tracing-config=""
(ddev) DBG | autostart-enabled="off"
(ddev) DBG | autostart-delay=0
(ddev) DBG | defaultfrontend=""
(ddev) DBG | storagecontrollername0="SATA"
(ddev) DBG | storagecontrollertype0="IntelAhci"
(ddev) DBG | storagecontrollerinstance0="0"
(ddev) DBG | storagecontrollermaxportcount0="30"
(ddev) DBG | storagecontrollerportcount0="30"
(ddev) DBG | storagecontrollerbootable0="on"
(ddev) DBG | "SATA-0-0"="/Users/rubot/.docker/machine/machines/ddev/boot2docker.iso"
(ddev) DBG | "SATA-ImageUUID-0-0"="68bbc276-9b64-4ea5-a67d-29f2f065bf6f"
(ddev) DBG | "SATA-tempeject"="off"
(ddev) DBG | "SATA-IsEjected"="off"
(ddev) DBG | "SATA-1-0"="/Users/rubot/.docker/machine/machines/ddev/disk.vmdk"
(ddev) DBG | "SATA-ImageUUID-1-0"="b75e1c05-f592-4575-b287-3223b9dfa361"
(ddev) DBG | "SATA-2-0"="none"
(ddev) DBG | "SATA-3-0"="none"
(ddev) DBG | "SATA-4-0"="none"
(ddev) DBG | "SATA-5-0"="none"
(ddev) DBG | "SATA-6-0"="none"
(ddev) DBG | "SATA-7-0"="none"
(ddev) DBG | "SATA-8-0"="none"
(ddev) DBG | "SATA-9-0"="none"
(ddev) DBG | "SATA-10-0"="none"
(ddev) DBG | "SATA-11-0"="none"
(ddev) DBG | "SATA-12-0"="none"
(ddev) DBG | "SATA-13-0"="none"
(ddev) DBG | "SATA-14-0"="none"
(ddev) DBG | "SATA-15-0"="none"
(ddev) DBG | "SATA-16-0"="none"
(ddev) DBG | "SATA-17-0"="none"
(ddev) DBG | "SATA-18-0"="none"
(ddev) DBG | "SATA-19-0"="none"
(ddev) DBG | "SATA-20-0"="none"
(ddev) DBG | "SATA-21-0"="none"
(ddev) DBG | "SATA-22-0"="none"
(ddev) DBG | "SATA-23-0"="none"
(ddev) DBG | "SATA-24-0"="none"
(ddev) DBG | "SATA-25-0"="none"
(ddev) DBG | "SATA-26-0"="none"
(ddev) DBG | "SATA-27-0"="none"
(ddev) DBG | "SATA-28-0"="none"
(ddev) DBG | "SATA-29-0"="none"
(ddev) DBG | natnet1="nat"
(ddev) DBG | macaddress1="080027A42B25"
(ddev) DBG | cableconnected1="on"
(ddev) DBG | nic1="nat"
(ddev) DBG | nictype1="82540EM"
(ddev) DBG | nicspeed1="0"
(ddev) DBG | mtu="0"
(ddev) DBG | sockSnd="64"
(ddev) DBG | sockRcv="64"
(ddev) DBG | tcpWndSnd="64"
(ddev) DBG | tcpWndRcv="64"
(ddev) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,53497,,22"
(ddev) DBG | hostonlyadapter2="vboxnet0"
(ddev) DBG | macaddress2="08002757C1AF"
(ddev) DBG | cableconnected2="on"
(ddev) DBG | nic2="hostonly"
(ddev) DBG | nictype2="82540EM"
(ddev) DBG | nicspeed2="0"
(ddev) DBG | nic3="none"
(ddev) DBG | nic4="none"
(ddev) DBG | nic5="none"
(ddev) DBG | nic6="none"
(ddev) DBG | nic7="none"
(ddev) DBG | nic8="none"
(ddev) DBG | hidpointing="ps2mouse"
(ddev) DBG | hidkeyboard="ps2kbd"
(ddev) DBG | uart1="off"
(ddev) DBG | uart2="off"
(ddev) DBG | lpt1="off"
(ddev) DBG | lpt2="off"
(ddev) DBG | audio="none"
(ddev) DBG | clipboard="disabled"
(ddev) DBG | draganddrop="disabled"
(ddev) DBG | SessionName="headless"
(ddev) DBG | VideoMode="720,400,0"<strong i="14">@0</strong>,0 1
(ddev) DBG | vrde="off"
(ddev) DBG | usb="off"
(ddev) DBG | ehci="off"
(ddev) DBG | xhci="off"
(ddev) DBG | SharedFolderNameMachineMapping1="Users"
(ddev) DBG | SharedFolderPathMachineMapping1="/Users"
(ddev) DBG | VRDEActiveConnection="off"
(ddev) DBG | VRDEClients=0
(ddev) DBG | vcpenabled="off"
(ddev) DBG | vcpscreens=0
(ddev) DBG | vcpfile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.webm"
(ddev) DBG | vcpwidth=1024
(ddev) DBG | vcpheight=768
(ddev) DBG | vcprate=512
(ddev) DBG | vcpfps=25
(ddev) DBG | GuestMemoryBalloon=0
(ddev) DBG | GuestOSType="Linux26_64"
(ddev) DBG | GuestAdditionsRunLevel=2
(ddev) DBG | GuestAdditionsVersion="5.0.8 r103449"
(ddev) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449828743931
(ddev) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449828751900
(ddev) DBG | GuestAdditionsFacility_Seamless Mode=0,1449828743931
(ddev) DBG | GuestAdditionsFacility_Graphics Mode=0,1449828743931
(ddev) DBG | }
(ddev) DBG | STDERR:
(ddev) DBG | {
(ddev) DBG | }
(ddev) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo ddev --machinereadable
(ddev) DBG | STDOUT:
(ddev) DBG | {
(ddev) DBG | name="ddev"
(ddev) DBG | groups="/"
(ddev) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(ddev) DBG | UUID="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | CfgFile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.vbox"
(ddev) DBG | SnapFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Snapshots"
(ddev) DBG | LogFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Logs"
(ddev) DBG | hardwareuuid="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | memory=1024
(ddev) DBG | pagefusion="off"
(ddev) DBG | vram=8
(ddev) DBG | cpuexecutioncap=100
(ddev) DBG | hpet="on"
(ddev) DBG | chipset="piix3"
(ddev) DBG | firmware="BIOS"
(ddev) DBG | cpus=1
(ddev) DBG | pae="on"
(ddev) DBG | longmode="on"
(ddev) DBG | cpuid-portability-level=0
(ddev) DBG | bootmenu="disabled"
(ddev) DBG | boot1="dvd"
(ddev) DBG | boot2="dvd"
(ddev) DBG | boot3="disk"
(ddev) DBG | boot4="none"
(ddev) DBG | acpi="on"
(ddev) DBG | ioapic="on"
(ddev) DBG | biossystemtimeoffset=0
(ddev) DBG | rtcuseutc="on"
(ddev) DBG | hwvirtex="on"
(ddev) DBG | nestedpaging="on"
(ddev) DBG | largepages="on"
(ddev) DBG | vtxvpid="on"
(ddev) DBG | vtxux="on"
(ddev) DBG | paravirtprovider="default"
(ddev) DBG | VMState="running"
(ddev) DBG | VMStateChangeTime="2015-12-11T10:12:04.963000000"
(ddev) DBG | monitorcount=1
(ddev) DBG | accelerate3d="off"
(ddev) DBG | accelerate2dvideo="off"
(ddev) DBG | teleporterenabled="off"
(ddev) DBG | teleporterport=0
(ddev) DBG | teleporteraddress=""
(ddev) DBG | teleporterpassword=""
(ddev) DBG | tracing-enabled="off"
(ddev) DBG | tracing-allow-vm-access="off"
(ddev) DBG | tracing-config=""
(ddev) DBG | autostart-enabled="off"
(ddev) DBG | autostart-delay=0
(ddev) DBG | defaultfrontend=""
(ddev) DBG | storagecontrollername0="SATA"
(ddev) DBG | storagecontrollertype0="IntelAhci"
(ddev) DBG | storagecontrollerinstance0="0"
(ddev) DBG | storagecontrollermaxportcount0="30"
(ddev) DBG | storagecontrollerportcount0="30"
(ddev) DBG | storagecontrollerbootable0="on"
(ddev) DBG | "SATA-0-0"="/Users/rubot/.docker/machine/machines/ddev/boot2docker.iso"
(ddev) DBG | "SATA-ImageUUID-0-0"="68bbc276-9b64-4ea5-a67d-29f2f065bf6f"
(ddev) DBG | "SATA-tempeject"="off"
(ddev) DBG | "SATA-IsEjected"="off"
(ddev) DBG | "SATA-1-0"="/Users/rubot/.docker/machine/machines/ddev/disk.vmdk"
(ddev) DBG | "SATA-ImageUUID-1-0"="b75e1c05-f592-4575-b287-3223b9dfa361"
(ddev) DBG | "SATA-2-0"="none"
(ddev) DBG | "SATA-3-0"="none"
(ddev) DBG | "SATA-4-0"="none"
(ddev) DBG | "SATA-5-0"="none"
(ddev) DBG | "SATA-6-0"="none"
(ddev) DBG | "SATA-7-0"="none"
(ddev) DBG | "SATA-8-0"="none"
(ddev) DBG | "SATA-9-0"="none"
(ddev) DBG | "SATA-10-0"="none"
(ddev) DBG | "SATA-11-0"="none"
(ddev) DBG | "SATA-12-0"="none"
(ddev) DBG | "SATA-13-0"="none"
(ddev) DBG | "SATA-14-0"="none"
(ddev) DBG | "SATA-15-0"="none"
(ddev) DBG | "SATA-16-0"="none"
(ddev) DBG | "SATA-17-0"="none"
(ddev) DBG | "SATA-18-0"="none"
(ddev) DBG | "SATA-19-0"="none"
(ddev) DBG | "SATA-20-0"="none"
(ddev) DBG | "SATA-21-0"="none"
(ddev) DBG | "SATA-22-0"="none"
(ddev) DBG | "SATA-23-0"="none"
(ddev) DBG | "SATA-24-0"="none"
(ddev) DBG | "SATA-25-0"="none"
(ddev) DBG | "SATA-26-0"="none"
(ddev) DBG | "SATA-27-0"="none"
(ddev) DBG | "SATA-28-0"="none"
(ddev) DBG | "SATA-29-0"="none"
(ddev) DBG | natnet1="nat"
(ddev) DBG | macaddress1="080027A42B25"
(ddev) DBG | cableconnected1="on"
(ddev) DBG | nic1="nat"
(ddev) DBG | nictype1="82540EM"
(ddev) DBG | nicspeed1="0"
(ddev) DBG | mtu="0"
(ddev) DBG | sockSnd="64"
(ddev) DBG | sockRcv="64"
(ddev) DBG | tcpWndSnd="64"
(ddev) DBG | tcpWndRcv="64"
(ddev) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,53497,,22"
(ddev) DBG | hostonlyadapter2="vboxnet0"
(ddev) DBG | macaddress2="08002757C1AF"
(ddev) DBG | cableconnected2="on"
(ddev) DBG | nic2="hostonly"
(ddev) DBG | nictype2="82540EM"
(ddev) DBG | nicspeed2="0"
(ddev) DBG | nic3="none"
(ddev) DBG | nic4="none"
(ddev) DBG | nic5="none"
(ddev) DBG | nic6="none"
(ddev) DBG | nic7="none"
(ddev) DBG | nic8="none"
(ddev) DBG | hidpointing="ps2mouse"
(ddev) DBG | hidkeyboard="ps2kbd"
(ddev) DBG | uart1="off"
(ddev) DBG | uart2="off"
(ddev) DBG | lpt1="off"
(ddev) DBG | lpt2="off"
(ddev) DBG | audio="none"
(ddev) DBG | clipboard="disabled"
(ddev) DBG | draganddrop="disabled"
(ddev) DBG | SessionName="headless"
(ddev) DBG | VideoMode="720,400,0"<strong i="15">@0</strong>,0 1
(ddev) DBG | vrde="off"
(ddev) DBG | usb="off"
(ddev) DBG | ehci="off"
(ddev) DBG | xhci="off"
(ddev) DBG | SharedFolderNameMachineMapping1="Users"
(ddev) DBG | SharedFolderPathMachineMapping1="/Users"
(ddev) DBG | VRDEActiveConnection="off"
(ddev) DBG | VRDEClients=0
(ddev) DBG | vcpenabled="off"
(ddev) DBG | vcpscreens=0
(ddev) DBG | vcpfile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.webm"
(ddev) DBG | vcpwidth=1024
(ddev) DBG | vcpheight=768
(ddev) DBG | vcprate=512
(ddev) DBG | vcpfps=25
(ddev) DBG | GuestMemoryBalloon=0
(ddev) DBG | GuestOSType="Linux26_64"
(ddev) DBG | GuestAdditionsRunLevel=2
(ddev) DBG | GuestAdditionsVersion="5.0.8 r103449"
(ddev) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449828743931
(ddev) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449828751900
(ddev) DBG | GuestAdditionsFacility_Seamless Mode=0,1449828743931
(ddev) DBG | GuestAdditionsFacility_Graphics Mode=0,1449828743931
(ddev) DBG | }
(ddev) DBG | STDERR:
(ddev) DBG | {
(ddev) DBG | }
(ddev) DBG | Using SSH client type: external
(ddev) DBG | About to run SSH command:
(ddev) DBG | ip addr show dev eth1
(ddev) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(ddev) DBG | link/ether 08:00:27:57:c1:af brd ff:ff:ff:ff:ff:ff
(ddev) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG | inet6 fe80::a00:27ff:fe57:c1af/64 scope link
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG |
(ddev) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(ddev) DBG | link/ether 08:00:27:57:c1:af brd ff:ff:ff:ff:ff:ff
(ddev) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG | inet6 fe80::a00:27ff:fe57:c1af/64 scope link
Reading CA certificate from /Users/rubot/.docker/machine/certs/ca.pem
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG |
(ddev) DBG | END SSH
(ddev) DBG |
Reading server certificate from /Users/rubot/.docker/machine/machines/ddev/server.pem
Reading server key from /Users/rubot/.docker/machine/machines/ddev/server-key.pem
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.101:2376": dial tcp 192.168.99.101:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
→ docker-machine --debug regenerate-certs -f ddev
Docker Machine Version: 0.5.1 (HEAD)
Regenerating TLS certificates
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:54253
() Calling RPCServerDriver.GetVersion
Using API Version 1
() Calling RPCServerDriver.SetConfigRaw
() Calling RPCServerDriver.GetMachineName
command=configureAuth machine=ddev
Detecting the provisioner...
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
cat /etc/os-release
SSH cmd err, output: <nil>: NAME=Boot2Docker
VERSION=1.9.0
ID=boot2docker
ID_LIKE=tcl
VERSION_ID=1.9.0
PRETTY_NAME="Boot2Docker 1.9.0 (TCL 6.4); master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015"
ANSI_COLOR="1;34"
HOME_URL="http://boot2docker.io"
SUPPORT_URL="https://github.com/boot2docker/boot2docker"
BUG_REPORT_URL="https://github.com/boot2docker/boot2docker/issues"
found compatible host: boot2docker
(ddev) Calling RPCServerDriver.GetMachineName
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /usr/bin/sethostname ddev && echo "ddev" | sudo tee /var/lib/boot2docker/etc/hostname
SSH cmd err, output: <nil>: Setting hostname to ddev Done.
ddev
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:54257 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23091
unix 3 [ ] STREAM CONNECTED 23090
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:54258 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23144
unix 3 [ ] STREAM CONNECTED 23143
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 36 0 10.0.2.15:ssh 10.0.2.2:54259 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23199
unix 3 [ ] STREAM CONNECTED 23198
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 36 0 10.0.2.15:ssh 10.0.2.2:54260 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23259
unix 3 [ ] STREAM CONNECTED 23258
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:54261 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23312
unix 3 [ ] STREAM CONNECTED 23311
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
Unable to verify the Docker daemon is listening: Maximum number of retries (5) exceeded
rubot
am 11. Dez. 2015
@ Nathanleclaire Ich sehe, dies wurde aus dem Meilenstein von
tdensmore
am 11. Dez. 2015
Ich habe es wieder gesehen - hier ist das Debug, das Sie nach @nathanleclaire gefragt
- eine Umgebung, die fehlschlägt
- ein regenerate-certs
- eine Umgebung, die erfolgreich ist
alle mit --debug
$ docker-machine --debug env force12
Docker Machine Version: 0.5.0 (04cfa58)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:50951
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetState
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) Calling RpcServerDriver.GetURL
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="12">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="13">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
Reading CA certificate from /Users/liz/.docker/machine/certs/ca.pem
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
Reading server certificate from /Users/liz/.docker/machine/machines/force12/server.pem
Reading server key from /Users/liz/.docker/machine/machines/force12/server-key.pem
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.101:2376": x509: certificate is valid for 192.168.99.100, not 192.168.99.101
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
$ docker-machine --debug regenerate-certs force12
Docker Machine Version: 0.5.0 (04cfa58)
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): y
Regenerating TLS certificates
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:51158
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
command=configureAuth machine=force12
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
cat /etc/os-release
SSH cmd err, output: <nil>: NAME=Boot2Docker
VERSION=1.9.0
ID=boot2docker
ID_LIKE=tcl
VERSION_ID=1.9.0
PRETTY_NAME="Boot2Docker 1.9.0 (TCL 6.4); master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015"
ANSI_COLOR="1;34"
HOME_URL="http://boot2docker.io"
SUPPORT_URL="https://github.com/boot2docker/boot2docker"
BUG_REPORT_URL="https://github.com/boot2docker/boot2docker/issues"
found compatible host: boot2docker
(force12) Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /usr/bin/sethostname force12 && echo "force12" | sudo tee /var/lib/boot2docker/etc/hostname
SSH cmd err, output: <nil>: Setting hostname to force12 Done.
force12
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:51162 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 2 [ ACC ] STREAM LISTENING 16868 /var/run/docker.sock
unix 2 [ ACC ] STREAM LISTENING 16626 /var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 17196 /var/lib/docker/network/files/05df9531506ff5bae20f65cc213e979e52c91a1f060e3919b6a4e1d03eafe060.sock
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 17998
unix 3 [ ] DGRAM 14296
unix 3 [ ] STREAM CONNECTED 17999
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo mkdir -p /var/lib/boot2docker
SSH cmd err, output: <nil>:
(force12) Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetIP
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="5">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
Copying certs to the local machine directory...
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
generating server cert: /Users/liz/.docker/machine/machines/force12/server.pem ca-key=/Users/liz/.docker/machine/certs/ca.pem private-key=/Users/liz/.docker/machine/certs/ca-key.pem org=liz.force12
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker stop
SSH cmd err, output: <nil>:
Copying certs to the remote machine...
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/ca.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/server.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
' | sudo tee /var/lib/boot2docker/server-key.pem
SSH cmd err, output: <nil>: -----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
(force12) Calling RpcServerDriver.GetURL
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="6">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
(force12) Calling RpcServerDriver.DriverName
Setting Docker configuration on the remote daemon...
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf %s "
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
" | sudo tee /var/lib/boot2docker/profile
SSH cmd err, output: <nil>:
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker start
SSH cmd err, output: <nil>: Need TLS certs for force12,127.0.0.1,10.0.2.15,192.168.99.101
-------------------
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:51173 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 2 [ ACC ] STREAM LISTENING 16626 /var/run/acpid.socket
unix 3 [ ] STREAM CONNECTED 18575
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 18576
unix 3 [ ] DGRAM 14296
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 36 0 10.0.2.15:ssh 10.0.2.2:51175 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 18602 /var/run/docker.sock
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 2 [ ACC ] STREAM LISTENING 16626 /var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 18669 /var/lib/docker/network/files/ce0ed0d3d061d44db990ff28d601c4adf759830a98e014c54a4d7d2cb17ace20.sock
unix 3 [ ] STREAM CONNECTED 18784
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 18785
unix 3 [ ] DGRAM 14296
(force12) Calling RpcServerDriver.GetIP
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="7">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
(force12) Calling RpcServerDriver.GetConfigRaw
(force12) Calling RpcServerDriver.GetConfigRaw
$ docker-machine --debug env force12
Docker Machine Version: 0.5.0 (04cfa58)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:51295
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetState
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) Calling RpcServerDriver.GetURL
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="5">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="6">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
Reading CA certificate from /Users/liz/.docker/machine/certs/ca.pem
Reading server certificate from /Users/liz/.docker/machine/machines/force12/server.pem
Reading server key from /Users/liz/.docker/machine/machines/force12/server-key.pem
shell: bash
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.101:2376"
export DOCKER_CERT_PATH="/Users/liz/.docker/machine/machines/force12"
export DOCKER_MACHINE_NAME="force12"
# Run this command to configure your shell:
# eval "$(docker-machine --debug env force12)"
@tdensmore ASAP (es ist uns wichtig, das
nathanleclaire
am 11. Dez. 2015
@ Lizrice Danke! Werde mal schauen.
nathanleclaire
am 11. Dez. 2015
Das Ausführen von rm -rf /var/lib/docker/network auf dem Host-Computer hat bei mir funktioniert. Ich verstehe jedoch nicht, warum es passiert: Es war eine brandneue Maschine, der Cache wurde geleert.
vschiavoni
am 14. Dez. 2015
Ich bin mir nicht sicher, ob dies damit zusammenhängt, aber Folgendes schlägt für mich durchweg fehl:
docker-machine create -d amazonec2 test
eval $(docker-machine env test)
docker ps # all good
docker-machine stop test
docker-machine start test
eval $(docker-machine env test)
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "54.173.54.43:2376": x509: certificate is valid for 54.152.68.62, not 54.173.54.43
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
Ich laufe 0.5.4.
bassam
am 22. Dez. 2015
Ich glaube, ich habe einen wichtigen Hinweis darauf. Diese Informationen sind eine Erweiterung dessen, was ich oben in diesem Kommentar geschrieben habe .
Auf meinem Computer (Mac OS X 10.11.2, Docker-Computer-Version 0.5.1 (7e8e38e)) habe ich festgestellt, dass der Fehler "getsockopt: Verbindung abgelehnt" davon abhängt, wie lange ich auf den Aufruf von docker-machine env warte docker-machine restart .
Genauer gesagt, mit dem Skript reset.sh unten:
#!/bin/bash
docker-machine restart default
sleep $1
docker-machine env default
Ich habe festgestellt, dass source reset.sh 1 oder source reset.sh 2 dazu neigen, den Fehler auszulösen, aber source reset.sh 3 und höher sind immer erfolgreich. Ein bisschen nach dem Start zu warten hilft also aus irgendeinem Grund.
Ich habe auch festgestellt, dass diese Leitung (Konfiguration des Dialers) zufällig eine Zeitüberschreitung von 2 Sekunden hat, aber das kann damit zusammenhängen oder nicht.
cjerdonek
am 3. Jan. 2016
Ich sehe auch dasselbe wie @cjerdonek - Nach dem Starten der Maschine warten wir einfach 10 Sekunden, bevor wir den Befehl docker-machine env . Dies behebt normalerweise unsere Probleme.
Multiply
am 4. Jan. 2016
Ich bin nicht sicher, ob dies damit zusammenhängt, aber ich habe versucht, docker-machine restart default auszuführen und dann die Prozesse in dieser Prozessgruppe in Schritten von 0,25 Sekunden anzuzeigen. Ich habe dies getan, um zu sehen, ob nach dem Neustart noch etwas läuft.
Sicher genug, es zeigte sich, dass der untergeordnete Prozess /usr/local/bin/docker-machine-driver-virtualbox , der von docker-machine gestartet wurde, 0,5 Sekunden lang weiter lief, nachdem der übergeordnete Prozess docker-machine restart beendet wurde. Vielleicht endet etwas nicht sauber?
Hier ist meine Ausgabe (in Schritten von 0,25 Sekunden):
running ps:
58257 58257 docker-machine restart default
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
running ps:
58257 58257 docker-machine restart default
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
58257 58667 /Applications/VirtualBox.app/Contents/MacOS/VBoxManage showvminfo default --machinereadable
running ps:
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
running ps:
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
running ps:
running ps:
Und hier ist das Skript, mit dem ich es generiert habe:
#!/bin/bash
pgid=$(ps xao pgid,pid,command | grep "[d]ocker-machine restart" | awk '{print $1}')
echo "pgid: $pgid"
while [ 1 ]
do
echo "running ps:"
ps xao pgid,pid,command | grep -E "^$pgid"
sleep .25
done
Ich hatte gerade ein Problem damit, da 3 Netzwerkadapter für die VM aktiviert waren, der letzte, der an einen Bridged Adapter über die Ethernet-Verbindung angeschlossen war. VM hat lange gut funktioniert und plötzlich nicht mehr funktioniert. Es stellte sich heraus, dass ich von einer Ethernet-Verbindung zu einer drahtlosen Verbindung gewechselt war, sodass die VM eine IP im neuen Netzwerk nicht auflösen konnte, weiterhin für die Regenerierung der Zertifikate werbte, IPs nicht auflösen konnte usw.
Das Ändern der Einstellungen im VirtualBox Manager zur Verwendung des neuen Adapters hat das Problem behoben und anschließend ausgeführt:
docker-machine regenerate-certs default (oder Ihr VM-Name)
eval "$(docker-machine env default)"
sebastianvilla
am 7. Jan. 2016
Ich hoffe, diese Debug-Ausgabe kann hilfreich sein ... und FWIW Ich verwende den AWS-Treiber nicht.
Schritte zum Repro (auf Mac):
Installieren Sie DockerToolbox-1.9.1f.pkg und dann DockerToolbox-1.9.1g.pkg
Docker version 1.9.1, build a34a1d5
docker-compose version 1.5.2, build 7240ff3
docker-machine version 0.5.5, build 02c4254
der Befehl, der dies generiert hat:
docker-machine --debug create --driver virtualbox --virtualbox-memory 2048 registry
_Bitte beachten Sie den folgenden Fehler (Zeile 505) _
Generate server cert /usr/local/bin/generate_cert --host=registry,127.0.0.1,10.0.2.15,192.168.99.104 --ca=/var/lib/boot2docker/ca.pem --ca-key=/var/lib/boot2docker/tls/cakey.pem --cert=/var/lib/boot2docker/server.pem --key=/var/lib/boot2docker/server-key.pem --org=Boot2Docker
2016/01/07 05:19:20 Preventing overwrite: the following files already exist: "/var/lib/boot2docker/server.pem" "/var/lib/boot2docker/server-key.pem". To overwrite files, add "--overwrite".
(Registrierung) DBG | "SATA-7-0" = "keine"
(Registrierung) DBG | "SATA-8-0" = "keine"
(Registrierung) DBG | "SATA-9-0" = "keine"
(Registrierung) DBG | "SATA-10-0" = "keine"
(Registrierung) DBG | "SATA-11-0" = "keine"
(Registrierung) DBG | "SATA-12-0" = "keine"
(Registrierung) DBG | "SATA-13-0" = "keine"
(Registrierung) DBG | "SATA-14-0" = "keine"
(Registrierung) DBG | "SATA-15-0" = "keine"
(Registrierung) DBG | "SATA-16-0" = "keine"
(Registrierung) DBG | "SATA-17-0" = "keine"
(Registrierung) DBG | "SATA-18-0" = "keine"
(Registrierung) DBG | "SATA-19-0" = "keine"
(Registrierung) DBG | "SATA-20-0" = "keine"
(Registrierung) DBG | "SATA-21-0" = "keine"
(Registrierung) DBG | "SATA-22-0" = "keine"
(Registrierung) DBG | "SATA-23-0" = "keine"
(Registrierung) DBG | "SATA-24-0" = "keine"
(Registrierung) DBG | "SATA-25-0" = "keine"
(Registrierung) DBG | "SATA-26-0" = "keine"
(Registrierung) DBG | "SATA-27-0" = "keine"
(Registrierung) DBG | "SATA-28-0" = "keine"
(Registrierung) DBG | "SATA-29-0" = "keine"
(Registrierung) DBG | natnet1 = "nat"
(Registrierung) DBG | macaddress1 = "080027D369AC"
(Registrierung) DBG | Kabelverbindung1 = "ein"
(Registrierung) DBG | nic1 = "nat"
(Registrierung) DBG | nictype1 = "82540EM"
(Registrierung) DBG | nicspeed1 = "0"
(Registrierung) DBG | mtu = "0"
(Registrierung) DBG | sockSnd = "64"
(Registrierung) DBG | sockRcv = "64"
(Registrierung) DBG | tcpWndSnd = "64"
(Registrierung) DBG | tcpWndRcv = "64"
(Registrierung) DBG | Weiterleitung (0) = "ssh, tcp, 127.0.0.1,61554 ,, 22"
(Registrierung) DBG | hostonlyadapter2 = "vboxnet1"
(Registrierung) DBG | macaddress2 = "080027A8AF71"
(Registrierung) DBG | Kabelverbindung2 = "ein"
(Registrierung) DBG | nic2 = "nur hostly"
(Registrierung) DBG | nictype2 = "82540EM"
(Registrierung) DBG | nicspeed2 = "0"
(Registrierung) DBG | nic3 = "keine"
(Registrierung) DBG | nic4 = "keine"
(Registrierung) DBG | nic5 = "keine"
(Registrierung) DBG | nic6 = "keine"
(Registrierung) DBG | nic7 = "keine"
(Registrierung) DBG | nic8 = "keine"
(Registrierung) DBG | hidpointing = "ps2mouse"
(Registrierung) DBG | hidkeyboard = "ps2kbd"
(Registrierung) DBG | uart1 = "aus"
(Registrierung) DBG | uart2 = "aus"
(Registrierung) DBG | lpt1 = "aus"
(Registrierung) DBG | lpt2 = "aus"
(Registrierung) DBG | audio = "keine"
(Registrierung) DBG | Zwischenablage = "deaktiviert"
(Registrierung) DBG | draganddrop = "deaktiviert"
(Registrierung) DBG | SessionName = "kopflos"
(Registrierung) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(Registrierung) DBG | vrde = "aus"
(Registrierung) DBG | usb = "aus"
(Registrierung) DBG | ehci = "aus"
(Registrierung) DBG | xhci = "aus"
(Registrierung) DBG | SharedFolderNameMachineMapping1 = "Benutzer"
(Registrierung) DBG | SharedFolderPathMachineMapping1 = "/ Users"
(Registrierung) DBG | VRDEActiveConnection = "aus"
(Registrierung) DBG | VRDEClients = 0
(Registrierung) DBG | vcpenabled = "aus"
(Registrierung) DBG | vcpscreens = 0
(Registrierung) DBG | vcpfile = "/ Users / todd / .docker / machine / machine / registry / registry / registry.webm"
(Registrierung) DBG | vcpwidth = 1024
(Registrierung) DBG | vcpheight = 768
(Registrierung) DBG | vcprate = 512
(Registrierung) DBG | vcpfps = 25
(Registrierung) DBG | GuestMemoryBalloon = 0
(Registrierung) DBG | GuestOSType = "Linux26_64"
(Registrierung) DBG | GuestAdditionsRunLevel = 2
(Registrierung) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox-Basistreiber = 50,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(Registrierung) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(Registrierung) DBG | }}
(Registrierung) DBG | STDERR:
(Registrierung) DBG | {
(Registrierung) DBG | }}
(Registrierung) DBG | Verwenden des SSH-Clienttyps: extern
(Registrierung) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(Registrierung) DBG | Über den SSH-Befehl ausführen:
(Registrierung) DBG | ip addr show dev eth1
(Registrierung) DBG | SSH cmd err, Ausgabe:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | SSH zurückgegeben: 4: eth1:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | ENDE SSH
(Registrierung) DBG |
Generieren des Serverzertifikats: /Users/todd/.docker/machine/machines/registry/server.pem ca-key = / Benutzer / todd / .docker / machine / certs / ca.pem privater Schlüssel = / Users / todd /. docker / machine / certs / ca-key.pem org = todd.registry san = 192.168.99.104 localhost Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
So führen Sie den SSH-Befehl aus:
sudo /etc/init.d/docker stop
SSH cmd err, Ausgabe:
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
So führen Sie den SSH-Befehl aus:
wenn [ ! -z "$ (ip link show docker0)"]; dann sudo ip link docker0 löschen; fi
SSH cmd err, Ausgabe:
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
Über den SSH-Befehl ausführen:
printf '% s' '----- BEGIN CERTIFICATE -----
MIICxzCCAbGgAwIBAgIQN5zSGUNnaarpTbKMMbHnJjALBgkqhkiG9w0BAQswDzEN
MAsGA1UEChMEdG9kZDAeFw0xNTA5MDExNjM2MDBaFw0xODA4MTYxNjM2MDBaMA8x
DTALBgNVBAoTBHRvZGQwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDD
NnBEEJhhycZDUQvvfc6mygzjC / gPnrmR5VpmnkvcDg3FXSnihQvsZjIn02u7hXug
3noJ / neFabpacXvIrpvUl7ibehSGOCx / R5tNYX4U2PqLTt / eBpKt / Cq4pjfR7D0o
NCuorNFp97qed0gLHeT1dn7XZiV / r9BtjvCO / k / Pac6xJGx8jmdlkRfHh + DF07lh
QhKoLRoxautz9OYx6mUADKYIRXNeqqLd5sK3V + 89RBE0Fo / nCaRFrVZfhnMbKk7s
hPgrpWHJtwxb8L3KOAxUMNGGrCpbwNgx4OBrw8pcCXAU5xWOw3 / 32TROqZ + WZSQE
UQF34p1 + qtrE2uOb1UtlAgMBAAGjIzAhMA4GA1UdDwEB / wQEAwIArDAPBgNVHRMB
Af8EBTADAQH / MAsGCSqGSIb3DQEBCwOCAQEAcRsUPGDcIbt93lPqjzP1FF7KIP6c
YxPKXJEjfgwr0wmVg7JOeFvg5TojgeTmRT7DEPTdqPnNjQUxEaybDxv6mBVrUibv
BVlWdxTWeP3oPgjoJqvUoMVQzFYxocoEV2tHZiBHiEahdJf9U + Q2UA84wz1sriyb
8YMrmYr9AUrq0STHDW42pmGNLP ++ bYhAHBoQvR96qVegroxerc1piUwoN2GQ3FQU
GqI546vAxienOnU2dEWqMCHokmqipOFMKg3jEvMXusAPZEkoZ5tqKKxpaaSRbUt5
VthAzVpGmo + PmwJ70j0rgPu2k06ddl4R5gf6K814bdpE + 79qKB5DU3pqmA ==
----- ENDZERTIFIKAT -----
'| sudo tee /var/lib/boot2docker/ca.pem
SSH cmd err, Ausgabe:
MIICxzCCAbGgAwIBAgIQN5zSGUNnaarpTbKMMbHnJjALBgkqhkiG9w0BAQswDzEN
MAsGA1UEChMEdG9kZDAeFw0xNTA5MDExNjM2MDBaFw0xODA4MTYxNjM2MDBaMA8x
DTALBgNVBAoTBHRvZGQwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDD
NnBEEJhhycZDUQvvfc6mygzjC / gPnrmR5VpmnkvcDg3FXSnihQvsZjIn02u7hXug
3noJ / neFabpacXvIrpvUl7ibehSGOCx / R5tNYX4U2PqLTt / eBpKt / Cq4pjfR7D0o
NCuorNFp97qed0gLHeT1dn7XZiV / r9BtjvCO / k / Pac6xJGx8jmdlkRfHh + DF07lh
QhKoLRoxautz9OYx6mUADKYIRXNeqqLd5sK3V + 89RBE0Fo / nCaRFrVZfhnMbKk7s
hPgrpWHJtwxb8L3KOAxUMNGGrCpbwNgx4OBrw8pcCXAU5xWOw3 / 32TROqZ + WZSQE
UQF34p1 + qtrE2uOb1UtlAgMBAAGjIzAhMA4GA1UdDwEB / wQEAwIArDAPBgNVHRMB
Af8EBTADAQH / MAsGCSqGSIb3DQEBCwOCAQEAcRsUPGDcIbt93lPqjzP1FF7KIP6c
YxPKXJEjfgwr0wmVg7JOeFvg5TojgeTmRT7DEPTdqPnNjQUxEaybDxv6mBVrUibv
BVlWdxTWeP3oPgjoJqvUoMVQzFYxocoEV2tHZiBHiEahdJf9U + Q2UA84wz1sriyb
8YMrmYr9AUrq0STHDW42pmGNLP ++ bYhAHBoQvR96qVegroxerc1piUwoN2GQ3FQU
GqI546vAxienOnU2dEWqMCHokmqipOFMKg3jEvMXusAPZEkoZ5tqKKxpaaSRbUt5
VthAzVpGmo + PmwJ70j0rgPu2k06ddl4R5gf6K814bdpE + 79qKB5DU3pqmA ==
----- ENDZERTIFIKAT -----
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
Über den SSH-Befehl ausführen:
printf '% s' '----- BEGIN CERTIFICATE -----
MIIDDTCCAfWgAwIBAgIRAKIp + qUcAZ1lQMyI6ZNyJ9swDQYJKoZIhvcNAQELBQAw
DzENMAsGA1UEChMEdG9kZDAeFw0xNjAxMDcwNTE0MDBaFw0xODEyMjIwNTE0MDBa
MBgxFjAUBgNVBAoTDXRvZGQucmVnaXN0cnkwggEiMA0GCSqGSIb3DQEBAQUAA4IB
DwAwggEKAoIBAQCzrk5aMnQNq1i + DG / V86bcYUtiaDym8Bp5SHcRnBY6a8MjBX0B
QLQvMzsuo47DXtM9Q7KLTlzMwd0FBtcD / tjKNiJiXS0BVy / k3pNGKD08H0 / zq3Z2
t1gBdap7sxoZEj0qYQsg64iNLdMdv + cdcO7VTDJuELYPrDIm2ZHFJ7RYiwN84qMH
+ 0SEYvDlMmp9vPdnovEdR6bIBXby9Vc3fEj0BOFyswTJM8vEjmuPA6P6manJwoXf
lNUsI7nsj5HGgHvcFoWHWVKAJQoBDh9LSNl99a53ogZX0hywcIzPZz0Jsy5x8ov4
emaYvwXrpjRT6qxD9gsoPqBxParZZl8LFtj9AgMBAAGjWzBZMA4GA1UdDwEB / wQE
AwIDqDAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH / BAIw
ADAaBgNVHREEEzARgglsb2NhbGhvc3SHBMCoY2gwDQYJKoZIhvcNAQELBQADggEB
AG9JpK + tjgs9LC / IMBZgJyxXDto8QZovdC9m2qGp + / xY9UghiXIUpIkGzW9v4GJB
6pytjuHvQMCbkSNhZkGr / pcV5x5d3Y1g7UDvnwgKMhszefyyf96VEvzVRw0ek35A
cGvIFN71VWMxMUJGe2ui2c9pvRfsQKI / aE0HbCnlhriXh5TMUZUoGhKxO / twlVxe
dgRmayGoEgHdfdj6eyy9sAYwSQ8QUsYnf7ZuHHs62zV06jspCX5sLZPEm15znX6b
rCzFix1v97B + qj / y + R7 / eq8l2GGM2P0KzAiql6DtRKlaUzjIPhg + AddXPRXG1XhX
1oJnRKtiDKtQmf9Fo2QYCH8 =
----- ENDZERTIFIKAT -----
'| sudo tee /var/lib/boot2docker/server.pem
SSH cmd err, Ausgabe:
MIIDDTCCAfWgAwIBAgIRAKIp + qUcAZ1lQMyI6ZNyJ9swDQYJKoZIhvcNAQELBQAw
DzENMAsGA1UEChMEdG9kZDAeFw0xNjAxMDcwNTE0MDBaFw0xODEyMjIwNTE0MDBa
MBgxFjAUBgNVBAoTDXRvZGQucmVnaXN0cnkwggEiMA0GCSqGSIb3DQEBAQUAA4IB
DwAwggEKAoIBAQCzrk5aMnQNq1i + DG / V86bcYUtiaDym8Bp5SHcRnBY6a8MjBX0B
QLQvMzsuo47DXtM9Q7KLTlzMwd0FBtcD / tjKNiJiXS0BVy / k3pNGKD08H0 / zq3Z2
t1gBdap7sxoZEj0qYQsg64iNLdMdv + cdcO7VTDJuELYPrDIm2ZHFJ7RYiwN84qMH
+ 0SEYvDlMmp9vPdnovEdR6bIBXby9Vc3fEj0BOFyswTJM8vEjmuPA6P6manJwoXf
lNUsI7nsj5HGgHvcFoWHWVKAJQoBDh9LSNl99a53ogZX0hywcIzPZz0Jsy5x8ov4
emaYvwXrpjRT6qxD9gsoPqBxParZZl8LFtj9AgMBAAGjWzBZMA4GA1UdDwEB / wQE
AwIDqDAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH / BAIw
ADAaBgNVHREEEzARgglsb2NhbGhvc3SHBMCoY2gwDQYJKoZIhvcNAQELBQADggEB
AG9JpK + tjgs9LC / IMBZgJyxXDto8QZovdC9m2qGp + / xY9UghiXIUpIkGzW9v4GJB
6pytjuHvQMCbkSNhZkGr / pcV5x5d3Y1g7UDvnwgKMhszefyyf96VEvzVRw0ek35A
cGvIFN71VWMxMUJGe2ui2c9pvRfsQKI / aE0HbCnlhriXh5TMUZUoGhKxO / twlVxe
dgRmayGoEgHdfdj6eyy9sAYwSQ8QUsYnf7ZuHHs62zV06jspCX5sLZPEm15znX6b
rCzFix1v97B + qj / y + R7 / eq8l2GGM2P0KzAiql6DtRKlaUzjIPhg + AddXPRXG1XhX
1oJnRKtiDKtQmf9Fo2QYCH8 =
----- ENDZERTIFIKAT -----
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
Über den SSH-Befehl ausführen:
printf '% s' '----- BEGIN RSA PRIVATE KEY -----
MIIEpQIBAAKCAQEAs65OWjJ0DatYvgxv1fOm3GFLYmg8pvAaeUh3EZwWOmvDIwV9
AUC0LzM7LqOOw17TPUOyi05czMHdBQbXA / 7YyjYiYl0tAVcv5N6TRig9PB9P86t2
drdYAXWqe7MaGRI9KmELIOuIjS3THb / nHXDu1UwybhC2D6wyJtmRxSe0WIsDfOKj
B / tEhGLw5TJqfbz3Z6LxHUemyAV28vVXN3xI9AThcrMEyTPLxI5rjwOj + pmpycKF
35TVLCO57I + RxoB73BaFh1lSgCUKAQ4fS0jZffWud6IGV9IcsHCMz2c9CbMucfKL
+ HpmmL8F66Y0U + qsQ / YLKD6gcT2q2WZfCxbY / QIDAQABAoIBABP5G0KRey8NzfaK
QWBCDllPA2cz + RIBfJ / gu0Oc2yexVOautH + QJrdcdYawrazv / IFB5jXwBwbHwf7O
DNan3IdVzyqp + te8TlmdmDdjP7NQM739YFS / + qtm3gWUGiGRUnVEhk0pgWtYHbCf
5VvzcskJCE4N038YgBardrW4vSZeVcaDkZI0 / dI + vEfH21xFjbf3lc6916 / eFoa0
fwuZCkPTGunseHkviQPiv5YnrEPReN7TcUnPfqew3PHNI1zPHxN5hHJWPoBFh + fW
c2NREv / RErbGdN + / TQNcjPsLj2VJyEvcoOpyII3FpFP / hI707LF9i2uOSiuKH34N
OpwTpO0CgYEAybmSEFrkOU4tLDkkqdqJkiOpoqlGkeq3kQJJIB9GKHN / mguBqLvZ
2XA27Sk + NOJLA + 3GgEhNf2TotC7B5dFW6FGw9az + XCTo6KQDh5nV8v6dCKUoG3sc
c1gjWCJPwNaIEklZA5fQYY9SonXv7iZn7rWXwZhn / qHhpbGbTvs8SHMCgYEA5AZi
4NZBUSsoAoBndjR5tmMZC + Kas5rucTXCL9ovYoBC + kSrz5tayG1My1vsNuxAAVHw
19QvY00HM + SYiICna1GWp // ufRpUMgrVsqd83oY7N2FaMpy / VWfZXrf3Yt5nHBnO
4lXN3PreRqg28JfvVmdRkc7AHdPY37l2EbzprM8CgYEAv3v5nLDKp2MAGlR76wfZ
QvG7Wv6YUHafnXSv + V / 2dvt8CrwVbhgzKOYOHX3i4MxWLPqOTMNVXTJqem9P + 1mF
x62T7wExykH3HK5j81oh7zGl2sj7k2p / jTYDBuw7DHAYZlNdvb1kPtePt0uAX23x
hnS2Az0qqlj8Gw7GwGhXxuUCgYEAtQQE1qv / qinyVxoMCCBcRtegeHjpio8Bnsmo
YEh6uV1MzlRZeDPB + 74Y6o8MlAU0QlgEM7Hz9IafoyhjlmlbfqyERtW7Q4D1Ocy0
HGEtlZFFzQ7xhaA9m9UXEERGlSws + nfabn7jL / vPHJRJGPHkQ9k9Pdy9UnBsiB44
hphLgK0CgYEAmHhoQB1IPK6auV2oeVocgtiLYSrJI55iCxeJ5IDPfw + qtwfiK6Gb
w4GWkdK15ljRAo4qvAB + f8qpnPFxXzdGxJLt4Y9b4 / 6ie / g3oRpwGBQRm9NJIB / y
/ UXvXEKhtUciq1nuVOvFfE4F9sX9y6rGyhk5X + KA6rQFj9vaW897wgs =
----- END RSA PRIVATE KEY -----
'| sudo tee /var/lib/boot2docker/server-key.pem
SSH cmd err, Ausgabe:
MIIEpQIBAAKCAQEAs65OWjJ0DatYvgxv1fOm3GFLYmg8pvAaeUh3EZwWOmvDIwV9
AUC0LzM7LqOOw17TPUOyi05czMHdBQbXA / 7YyjYiYl0tAVcv5N6TRig9PB9P86t2
drdYAXWqe7MaGRI9KmELIOuIjS3THb / nHXDu1UwybhC2D6wyJtmRxSe0WIsDfOKj
B / tEhGLw5TJqfbz3Z6LxHUemyAV28vVXN3xI9AThcrMEyTPLxI5rjwOj + pmpycKF
35TVLCO57I + RxoB73BaFh1lSgCUKAQ4fS0jZffWud6IGV9IcsHCMz2c9CbMucfKL
+ HpmmL8F66Y0U + qsQ / YLKD6gcT2q2WZfCxbY / QIDAQABAoIBABP5G0KRey8NzfaK
QWBCDllPA2cz + RIBfJ / gu0Oc2yexVOautH + QJrdcdYawrazv / IFB5jXwBwbHwf7O
DNan3IdVzyqp + te8TlmdmDdjP7NQM739YFS / + qtm3gWUGiGRUnVEhk0pgWtYHbCf
5VvzcskJCE4N038YgBardrW4vSZeVcaDkZI0 / dI + vEfH21xFjbf3lc6916 / eFoa0
fwuZCkPTGunseHkviQPiv5YnrEPReN7TcUnPfqew3PHNI1zPHxN5hHJWPoBFh + fW
c2NREv / RErbGdN + / TQNcjPsLj2VJyEvcoOpyII3FpFP / hI707LF9i2uOSiuKH34N
OpwTpO0CgYEAybmSEFrkOU4tLDkkqdqJkiOpoqlGkeq3kQJJIB9GKHN / mguBqLvZ
2XA27Sk + NOJLA + 3GgEhNf2TotC7B5dFW6FGw9az + XCTo6KQDh5nV8v6dCKUoG3sc
c1gjWCJPwNaIEklZA5fQYY9SonXv7iZn7rWXwZhn / qHhpbGbTvs8SHMCgYEA5AZi
4NZBUSsoAoBndjR5tmMZC + Kas5rucTXCL9ovYoBC + kSrz5tayG1My1vsNuxAAVHw
19QvY00HM + SYiICna1GWp // ufRpUMgrVsqd83oY7N2FaMpy / VWfZXrf3Yt5nHBnO
4lXN3PreRqg28JfvVmdRkc7AHdPY37l2EbzprM8CgYEAv3v5nLDKp2MAGlR76wfZ
QvG7Wv6YUHafnXSv + V / 2dvt8CrwVbhgzKOYOHX3i4MxWLPqOTMNVXTJqem9P + 1mF
x62T7wExykH3HK5j81oh7zGl2sj7k2p / jTYDBuw7DHAYZlNdvb1kPtePt0uAX23x
hnS2Az0qqlj8Gw7GwGhXxuUCgYEAtQQE1qv / qinyVxoMCCBcRtegeHjpio8Bnsmo
YEh6uV1MzlRZeDPB + 74Y6o8MlAU0QlgEM7Hz9IafoyhjlmlbfqyERtW7Q4D1Ocy0
HGEtlZFFzQ7xhaA9m9UXEERGlSws + nfabn7jL / vPHJRJGPHkQ9k9Pdy9UnBsiB44
hphLgK0CgYEAmHhoQB1IPK6auV2oeVocgtiLYSrJI55iCxeJ5IDPfw + qtwfiK6Gb
w4GWkdK15ljRAo4qvAB + f8qpnPFxXzdGxJLt4Y9b4 / 6ie / g3oRpwGBQRm9NJIB / y
/ UXvXEKhtUciq1nuVOvFfE4F9sX9y6rGyhk5X + KA6rQFj9vaW897wgs =
----- END RSA PRIVATE KEY -----
(Registrierung) Aufruf von .GetURL
(Registrierung) DBG | BEFEHL: / usr / local / bin / VBoxManage showvminfo-Registrierung --machinereadable
(Registrierung) DBG | STDOUT:
(Registrierung) DBG | {
(Registrierung) DBG | name = "Registrierung"
(Registrierung) DBG | groups = "/"
(Registrierung) DBG | ostype = "Linux 2.6 / 3.x / 4.x (64-Bit)"
(Registrierung) DBG | UUID = 16c87535-d443-4d18-8957-4a2a35e1a449
(Registrierung) DBG | CfgFile = "/ Users / todd / .docker / machine / machine / registry / registry / registry.vbox"
(Registrierung) DBG | SnapFldr = "/ Benutzer / todd / .docker / Maschine / Maschinen / Registrierung / Registrierung / Snapshots"
(Registrierung) DBG | LogFldr = "/ Benutzer / todd / .docker / Maschine / Maschinen / Registrierung / Registrierung / Protokolle"
(Registrierung) DBG | hardwareuuid = "16c87535-d443-4d18-8957-4a2a35e1a449"
(Registrierung) DBG | Speicher = 2048
(Registrierung) DBG | pagefusion = "aus"
(Registrierung) DBG | vram = 8
(Registrierung) DBG | cpuexecutioncap = 100
(Registrierung) DBG | hpet = "on"
(Registrierung) DBG | Chipsatz = "piix3"
(Registrierung) DBG | Firmware = "BIOS"
(Registrierung) DBG | cpus = 1
(Registrierung) DBG | pae = "on"
(Registrierung) DBG | longmode = "on"
(Registrierung) DBG | cpuid-portability-level = 0
(Registrierung) DBG | bootmenu = "deaktiviert"
(Registrierung) DBG | boot1 = "dvd"
(Registrierung) DBG | boot2 = "dvd"
(Registrierung) DBG | boot3 = "Festplatte"
(Registrierung) DBG | boot4 = "keine"
(Registrierung) DBG | acpi = "on"
(Registrierung) DBG | ioapic = "on"
(Registrierung) DBG | biossystemtimeoffset = 0
(Registrierung) DBG | rtcuseutc = "on"
(Registrierung) DBG | hwvirtex = "on"
(Registrierung) DBG | nestedpaging = "on"
(Registrierung) DBG | largepages = "on"
(Registrierung) DBG | vtxvpid = "on"
(Registrierung) DBG | vtxux = "on"
(Registrierung) DBG | paravirtprovider = "Standard"
(Registrierung) DBG | VMState = "läuft"
(Registrierung) DBG | VMStateChangeTime = "2016-01-07T05: 18: 39.037000000"
(Registrierung) DBG | Monitoranzahl = 1
(Registrierung) DBG | beschleunigen3d = "aus"
(Registrierung) DBG | Accelerate2dvideo = "aus"
(Registrierung) DBG | teleporterenabled = "aus"
(Registrierung) DBG | Teleporterport = 0
(Registrierung) DBG | teleporteraddress = ""
(Registrierung) DBG | teleporterpassword = ""
(Registrierung) DBG | tracing-enabled = "aus"
(Registrierung) DBG | tracing-allow-vm-access = "aus"
(Registrierung) DBG | tracing-config = ""
(Registrierung) DBG | autostart-enabled = "aus"
(Registrierung) DBG | Autostart-Verzögerung = 0
(Registrierung) DBG | defaultfrontend = ""
(Registrierung) DBG | storagecontrollername0 = "SATA"
(Registrierung) DBG | storagecontrollertype0 = "IntelAhci"
(Registrierung) DBG | storagecontrollerinstance0 = "0"
(Registrierung) DBG | storagecontrollermaxportcount0 = "30"
(Registrierung) DBG | storagecontrollerportcount0 = "30"
(Registrierung) DBG | storagecontrollerbootable0 = "on"
(Registrierung) DBG | "SATA-0-0" = "/ Users / todd / .docker / machine / machine / registry / boot2docker.iso"
(Registrierung) DBG | SATA-ImageUUID-0-0 = b732119e-8237-4676-9b30-b05814370564
(Registrierung) DBG | "SATA-tempeject" = "aus"
(Registrierung) DBG | "SATA-IsEjected" = "aus"
(Registrierung) DBG | "SATA-1-0" = "/ Users / todd / .docker / machine / machine / registry / disk.vmdk"
(Registrierung) DBG | SATA-ImageUUID-1-0 = 80791e9a-dbd2-488c-abe6-5128ea60fb54
(Registrierung) DBG | "SATA-2-0" = "keine"
(Registrierung) DBG | "SATA-3-0" = "keine"
(Registrierung) DBG | "SATA-4-0" = "keine"
(Registrierung) DBG | "SATA-5-0" = "keine"
(Registrierung) DBG | "SATA-6-0" = "keine"
(Registrierung) DBG | "SATA-7-0" = "keine"
(Registrierung) DBG | "SATA-8-0" = "keine"
(Registrierung) DBG | "SATA-9-0" = "keine"
(Registrierung) DBG | "SATA-10-0" = "keine"
(Registrierung) DBG | "SATA-11-0" = "keine"
(Registrierung) DBG | "SATA-12-0" = "keine"
(Registrierung) DBG | "SATA-13-0" = "keine"
(Registrierung) DBG | "SATA-14-0" = "keine"
(Registrierung) DBG | "SATA-15-0" = "keine"
(Registrierung) DBG | "SATA-16-0" = "keine"
(Registrierung) DBG | "SATA-17-0" = "keine"
(Registrierung) DBG | "SATA-18-0" = "keine"
(Registrierung) DBG | "SATA-19-0" = "keine"
(Registrierung) DBG | "SATA-20-0" = "keine"
(Registrierung) DBG | "SATA-21-0" = "keine"
(Registrierung) DBG | "SATA-22-0" = "keine"
(Registrierung) DBG | "SATA-23-0" = "keine"
(Registrierung) DBG | "SATA-24-0" = "keine"
(Registrierung) DBG | "SATA-25-0" = "keine"
(Registrierung) DBG | "SATA-26-0" = "keine"
(Registrierung) DBG | "SATA-27-0" = "keine"
(Registrierung) DBG | "SATA-28-0" = "keine"
(Registrierung) DBG | "SATA-29-0" = "keine"
(Registrierung) DBG | natnet1 = "nat"
(Registrierung) DBG | macaddress1 = "080027D369AC"
(Registrierung) DBG | Kabelverbindung1 = "ein"
(Registrierung) DBG | nic1 = "nat"
(Registrierung) DBG | nictype1 = "82540EM"
(Registrierung) DBG | nicspeed1 = "0"
(Registrierung) DBG | mtu = "0"
(Registrierung) DBG | sockSnd = "64"
(Registrierung) DBG | sockRcv = "64"
(Registrierung) DBG | tcpWndSnd = "64"
(Registrierung) DBG | tcpWndRcv = "64"
(Registrierung) DBG | Weiterleitung (0) = "ssh, tcp, 127.0.0.1,61554 ,, 22"
(Registrierung) DBG | hostonlyadapter2 = "vboxnet1"
(Registrierung) DBG | macaddress2 = "080027A8AF71"
(Registrierung) DBG | Kabelverbindung2 = "ein"
(Registrierung) DBG | nic2 = "nur hostly"
(Registrierung) DBG | nictype2 = "82540EM"
(Registrierung) DBG | nicspeed2 = "0"
(Registrierung) DBG | nic3 = "keine"
(Registrierung) DBG | nic4 = "keine"
(Registrierung) DBG | nic5 = "keine"
(Registrierung) DBG | nic6 = "keine"
(Registrierung) DBG | nic7 = "keine"
(Registrierung) DBG | nic8 = "keine"
(Registrierung) DBG | hidpointing = "ps2mouse"
(Registrierung) DBG | hidkeyboard = "ps2kbd"
(Registrierung) DBG | uart1 = "aus"
(Registrierung) DBG | uart2 = "aus"
(Registrierung) DBG | lpt1 = "aus"
(Registrierung) DBG | lpt2 = "aus"
(Registrierung) DBG | audio = "keine"
(Registrierung) DBG | Zwischenablage = "deaktiviert"
(Registrierung) DBG | draganddrop = "deaktiviert"
(Registrierung) DBG | SessionName = "kopflos"
(Registrierung) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(Registrierung) DBG | vrde = "aus"
(Registrierung) DBG | usb = "aus"
(Registrierung) DBG | ehci = "aus"
(Registrierung) DBG | xhci = "aus"
(Registrierung) DBG | SharedFolderNameMachineMapping1 = "Benutzer"
(Registrierung) DBG | SharedFolderPathMachineMapping1 = "/ Users"
(Registrierung) DBG | VRDEActiveConnection = "aus"
(Registrierung) DBG | VRDEClients = 0
(Registrierung) DBG | vcpenabled = "aus"
(Registrierung) DBG | vcpscreens = 0
(Registrierung) DBG | vcpfile = "/ Users / todd / .docker / machine / machine / registry / registry / registry.webm"
(Registrierung) DBG | vcpwidth = 1024
(Registrierung) DBG | vcpheight = 768
(Registrierung) DBG | vcprate = 512
(Registrierung) DBG | vcpfps = 25
(Registrierung) DBG | GuestMemoryBalloon = 0
(Registrierung) DBG | GuestOSType = "Linux26_64"
(Registrierung) DBG | GuestAdditionsRunLevel = 2
(Registrierung) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox-Basistreiber = 50,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(Registrierung) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(Registrierung) DBG | }}
(Registrierung) DBG | STDERR:
(Registrierung) DBG | {
(Registrierung) DBG | }}
(Registrierung) DBG | Verwenden des SSH-Clienttyps: extern
(Registrierung) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(Registrierung) DBG | Über den SSH-Befehl ausführen:
(Registrierung) DBG | ip addr show dev eth1
(Registrierung) DBG | SSH cmd err, Ausgabe:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | SSH zurückgegeben: 4: eth1:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | ENDE SSH
(Registrierung) DBG |
(Registrierung) Aufruf von .DriverName
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
Über den SSH-Befehl ausführen:
printf% s "
EXTRA_ARGS = '
--label provider = virtualbox
'
CACERT = / var / lib / boot2docker / ca.pem
DOCKER_HOST = '- H tcp: //0.0.0.0 : 2376'
DOCKER_STORAGE = aufs
DOCKER_TLS = auto
SERVERKEY = / var / lib / boot2docker / server-key.pem
SERVERCERT = / var / lib / boot2docker / server.pem
"| sudo tee / var / lib / boot2docker / profile
SSH cmd err, Ausgabe:
EXTRA_ARGS = '
--label provider = virtualbox
'
CACERT = / var / lib / boot2docker / ca.pem
DOCKER_HOST = '- H tcp: //0.0.0.0 : 2376'
DOCKER_STORAGE = aufs
DOCKER_TLS = auto
SERVERKEY = / var / lib / boot2docker / server-key.pem
SERVERCERT = / var / lib / boot2docker / server.pem
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
Über den SSH-Befehl ausführen:
sudo /etc/init.d/docker start
SSH cmd err, Ausgabe:
Serverzertifikat generieren
/ usr / local / bin / generate_cert --host = Registrierung, 127.0.0.1,10.0.2.15,192.168.99.104 --ca = / var / lib / boot2docker / ca.pem --ca-key = / var / lib / boot2docker / tls / cakey.pem --cert = / var / lib / boot2docker / server.pem --key = / var / lib / boot2docker / server-key.pem --org = Boot2Docker
2016/01/07 05:19:20 Überschreiben verhindern: Die folgenden Dateien sind bereits vorhanden: "/var/lib/boot2docker/server.pem" "/var/lib/boot2docker/server-key.pem". Fügen Sie zum Überschreiben von Dateien --overwrite .
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
Über den SSH-Befehl ausführen:
netstat -an
SSH cmd err, Ausgabe:
Proto Recv-Q Send-Q Lokale Adresse Fremdadressenstatus
tcp 0 0 0.0.0.0:22 0.0.0.0:* HÖREN
tcp 36 0 10.0.2.15:22 10.0.2.2:61576 GEGRÜNDET
tcp 0 0 10.0.2.15:22 10.0.2.2:61562 TIME_WAIT
tcp 0 0 ::: 22 ::: * HÖREN
Aktive UNIX-Domänensockets (Server und eingerichtet)
Proto RefCnt Flags Typ Status I-Knoten Pfad
Unix 2 [ACC] STREAM LISTENING 17854 /var/run/acpid.socket
Unix 2 [ACC] SEQPACKET LISTENING 14282 / run / udev / control
Unix 3 [] DGRAM 14291
Unix 3 [] DGRAM 14292
Unix 3 [] STREAM CONNECTED 19268
Unix 3 [] STREAM CONNECTED 19269
(Registrierung) Aufruf von .GetSSHHostname
(Registrierung) Aufruf von .GetSSHPort
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHKeyPath
(Registrierung) Aufruf von .GetSSHUsername
Verwenden des SSH-Clienttyps: extern
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
Über den SSH-Befehl ausführen:
netstat -an
SSH cmd err, Ausgabe:
Proto Recv-Q Send-Q Lokale Adresse Fremdadressenstatus
tcp 0 0 0.0.0.0:22 0.0.0.0:* HÖREN
tcp 0 0 10.0.2.15:22 10.0.2.2:61562 TIME_WAIT
tcp 36 0 10.0.2.15:22 10.0.2.2:61577 GEGRÜNDET
tcp 0 0 ::: 22 ::: * HÖREN
tcp 0 0 ::: 2376 ::: * HÖREN
Aktive UNIX-Domänensockets (Server und eingerichtet)
Proto RefCnt Flags Typ Status I-Knoten Pfad
Unix 2 [ACC] STREAM LISTENING 19354 /var/lib/docker/network/files/bd684d31dc97decf6f6ca4b4b54743921ee24555ae514291d23fa14f6a521a10.sock
Unix 2 [ACC] STREAM LISTENING 19287 /var/run/docker.sock
Unix 2 [ACC] STREAM LISTENING 17854 /var/run/acpid.socket
Unix 2 [ACC] SEQPACKET LISTENING 14282 / run / udev / control
Unix 3 [] DGRAM 14291
Unix 3 [] STREAM CONNECTED 19523
Unix 3 [] DGRAM 14292
Unix 3 [] STREAM CONNECTED 19524
(Registrierung) Aufruf von .GetIP
(Registrierung) DBG | BEFEHL: / usr / local / bin / VBoxManage showvminfo-Registrierung --machinereadable
(Registrierung) DBG | STDOUT:
(Registrierung) DBG | {
(Registrierung) DBG | name = "Registrierung"
(Registrierung) DBG | groups = "/"
(Registrierung) DBG | ostype = "Linux 2.6 / 3.x / 4.x (64-Bit)"
(Registrierung) DBG | UUID = 16c87535-d443-4d18-8957-4a2a35e1a449
(Registrierung) DBG | CfgFile = "/ Users / todd / .docker / machine / machine / registry / registry / registry.vbox"
(Registrierung) DBG | SnapFldr = "/ Benutzer / todd / .docker / Maschine / Maschinen / Registrierung / Registrierung / Snapshots"
(Registrierung) DBG | LogFldr = "/ Benutzer / todd / .docker / Maschine / Maschinen / Registrierung / Registrierung / Protokolle"
(Registrierung) DBG | hardwareuuid = "16c87535-d443-4d18-8957-4a2a35e1a449"
(Registrierung) DBG | Speicher = 2048
(Registrierung) DBG | pagefusion = "aus"
(Registrierung) DBG | vram = 8
(Registrierung) DBG | cpuexecutioncap = 100
(Registrierung) DBG | hpet = "on"
(Registrierung) DBG | Chipsatz = "piix3"
(Registrierung) DBG | Firmware = "BIOS"
(Registrierung) DBG | cpus = 1
(Registrierung) DBG | pae = "on"
(Registrierung) DBG | longmode = "on"
(Registrierung) DBG | cpuid-portability-level = 0
(Registrierung) DBG | bootmenu = "deaktiviert"
(Registrierung) DBG | boot1 = "dvd"
(Registrierung) DBG | boot2 = "dvd"
(Registrierung) DBG | boot3 = "Festplatte"
(Registrierung) DBG | boot4 = "keine"
(Registrierung) DBG | acpi = "on"
(Registrierung) DBG | ioapic = "on"
(Registrierung) DBG | biossystemtimeoffset = 0
(Registrierung) DBG | rtcuseutc = "on"
(Registrierung) DBG | hwvirtex = "on"
(Registrierung) DBG | nestedpaging = "on"
(Registrierung) DBG | largepages = "on"
(Registrierung) DBG | vtxvpid = "on"
(Registrierung) DBG | vtxux = "on"
(Registrierung) DBG | paravirtprovider = "Standard"
(Registrierung) DBG | VMState = "läuft"
(Registrierung) DBG | VMStateChangeTime = "2016-01-07T05: 18: 39.037000000"
(Registrierung) DBG | Monitoranzahl = 1
(Registrierung) DBG | beschleunigen3d = "aus"
(Registrierung) DBG | Accelerate2dvideo = "aus"
(Registrierung) DBG | teleporterenabled = "aus"
(Registrierung) DBG | Teleporterport = 0
(Registrierung) DBG | teleporteraddress = ""
(Registrierung) DBG | teleporterpassword = ""
(Registrierung) DBG | tracing-enabled = "aus"
(Registrierung) DBG | tracing-allow-vm-access = "aus"
(Registrierung) DBG | tracing-config = ""
(Registrierung) DBG | autostart-enabled = "aus"
(Registrierung) DBG | Autostart-Verzögerung = 0
(Registrierung) DBG | defaultfrontend = ""
(Registrierung) DBG | storagecontrollername0 = "SATA"
(Registrierung) DBG | storagecontrollertype0 = "IntelAhci"
(Registrierung) DBG | storagecontrollerinstance0 = "0"
(Registrierung) DBG | storagecontrollermaxportcount0 = "30"
(Registrierung) DBG | storagecontrollerportcount0 = "30"
(Registrierung) DBG | storagecontrollerbootable0 = "on"
(Registrierung) DBG | "SATA-0-0" = "/ Users / todd / .docker / machine / machine / registry / boot2docker.iso"
(Registrierung) DBG | SATA-ImageUUID-0-0 = b732119e-8237-4676-9b30-b05814370564
(Registrierung) DBG | "SATA-tempeject" = "aus"
(Registrierung) DBG | "SATA-IsEjected" = "aus"
(Registrierung) DBG | "SATA-1-0" = "/ Users / todd / .docker / machine / machine / registry / disk.vmdk"
(Registrierung) DBG | SATA-ImageUUID-1-0 = 80791e9a-dbd2-488c-abe6-5128ea60fb54
(Registrierung) DBG | "SATA-2-0" = "keine"
(Registrierung) DBG | "SATA-3-0" = "keine"
(Registrierung) DBG | "SATA-4-0" = "keine"
(Registrierung) DBG | "SATA-5-0" = "keine"
(Registrierung) DBG | "SATA-6-0" = "keine"
(Registrierung) DBG | "SATA-7-0" = "keine"
(Registrierung) DBG | "SATA-8-0" = "keine"
(Registrierung) DBG | "SATA-9-0" = "keine"
(Registrierung) DBG | "SATA-10-0" = "keine"
(Registrierung) DBG | "SATA-11-0" = "keine"
(Registrierung) DBG | "SATA-12-0" = "keine"
(Registrierung) DBG | "SATA-13-0" = "keine"
(Registrierung) DBG | "SATA-14-0" = "keine"
(Registrierung) DBG | "SATA-15-0" = "keine"
(Registrierung) DBG | "SATA-16-0" = "keine"
(Registrierung) DBG | "SATA-17-0" = "keine"
(Registrierung) DBG | "SATA-18-0" = "keine"
(Registrierung) DBG | "SATA-19-0" = "keine"
(Registrierung) DBG | "SATA-20-0" = "keine"
(Registrierung) DBG | "SATA-21-0" = "keine"
(Registrierung) DBG | "SATA-22-0" = "keine"
(Registrierung) DBG | "SATA-23-0" = "keine"
(Registrierung) DBG | "SATA-24-0" = "keine"
(Registrierung) DBG | "SATA-25-0" = "keine"
(Registrierung) DBG | "SATA-26-0" = "keine"
(Registrierung) DBG | "SATA-27-0" = "keine"
(Registrierung) DBG | "SATA-28-0" = "keine"
(Registrierung) DBG | "SATA-29-0" = "keine"
(Registrierung) DBG | natnet1 = "nat"
(Registrierung) DBG | macaddress1 = "080027D369AC"
(Registrierung) DBG | Kabelverbindung1 = "ein"
(Registrierung) DBG | nic1 = "nat"
(Registrierung) DBG | nictype1 = "82540EM"
(Registrierung) DBG | nicspeed1 = "0"
(Registrierung) DBG | mtu = "0"
(Registrierung) DBG | sockSnd = "64"
(Registrierung) DBG | sockRcv = "64"
(Registrierung) DBG | tcpWndSnd = "64"
(Registrierung) DBG | tcpWndRcv = "64"
(Registrierung) DBG | Weiterleitung (0) = "ssh, tcp, 127.0.0.1,61554 ,, 22"
(Registrierung) DBG | hostonlyadapter2 = "vboxnet1"
(Registrierung) DBG | macaddress2 = "080027A8AF71"
(Registrierung) DBG | Kabelverbindung2 = "ein"
(Registrierung) DBG | nic2 = "nur hostly"
(Registrierung) DBG | nictype2 = "82540EM"
(Registrierung) DBG | nicspeed2 = "0"
(Registrierung) DBG | nic3 = "keine"
(Registrierung) DBG | nic4 = "keine"
(Registrierung) DBG | nic5 = "keine"
(Registrierung) DBG | nic6 = "keine"
(Registrierung) DBG | nic7 = "keine"
(Registrierung) DBG | nic8 = "keine"
(Registrierung) DBG | hidpointing = "ps2mouse"
(Registrierung) DBG | hidkeyboard = "ps2kbd"
(Registrierung) DBG | uart1 = "aus"
(Registrierung) DBG | uart2 = "aus"
(Registrierung) DBG | lpt1 = "aus"
(Registrierung) DBG | lpt2 = "aus"
(Registrierung) DBG | audio = "keine"
(Registrierung) DBG | Zwischenablage = "deaktiviert"
(Registrierung) DBG | draganddrop = "deaktiviert"
(Registrierung) DBG | SessionName = "kopflos"
(Registrierung) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(Registrierung) DBG | vrde = "aus"
(Registrierung) DBG | usb = "aus"
(Registrierung) DBG | ehci = "aus"
(Registrierung) DBG | xhci = "aus"
(Registrierung) DBG | SharedFolderNameMachineMapping1 = "Benutzer"
(Registrierung) DBG | SharedFolderPathMachineMapping1 = "/ Users"
(Registrierung) DBG | VRDEActiveConnection = "aus"
(Registrierung) DBG | VRDEClients = 0
(Registrierung) DBG | vcpenabled = "aus"
(Registrierung) DBG | vcpscreens = 0
(Registrierung) DBG | vcpfile = "/ Users / todd / .docker / machine / machine / registry / registry / registry.webm"
(Registrierung) DBG | vcpwidth = 1024
(Registrierung) DBG | vcpheight = 768
(Registrierung) DBG | vcprate = 512
(Registrierung) DBG | vcpfps = 25
(Registrierung) DBG | GuestMemoryBalloon = 0
(Registrierung) DBG | GuestOSType = "Linux26_64"
(Registrierung) DBG | GuestAdditionsRunLevel = 2
(Registrierung) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox-Basistreiber = 50,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(Registrierung) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(Registrierung) DBG | }}
(Registrierung) DBG | STDERR:
(Registrierung) DBG | {
(Registrierung) DBG | }}
(Registrierung) DBG | Verwenden des SSH-Clienttyps: extern
(Registrierung) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(Registrierung) DBG | Über den SSH-Befehl ausführen:
(Registrierung) DBG | ip addr show dev eth1
(Registrierung) DBG | SSH cmd err, Ausgabe:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | SSH zurückgegeben: 4: eth1:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | ENDE SSH
(Registrierung) DBG |
(Registrierung) Aufruf von .GetURL
(Registrierung) DBG | BEFEHL: / usr / local / bin / VBoxManage showvminfo-Registrierung --machinereadable
(Registrierung) DBG | STDOUT:
(Registrierung) DBG | {
(Registrierung) DBG | name = "Registrierung"
(Registrierung) DBG | groups = "/"
(Registrierung) DBG | ostype = "Linux 2.6 / 3.x / 4.x (64-Bit)"
(Registrierung) DBG | UUID = 16c87535-d443-4d18-8957-4a2a35e1a449
(Registrierung) DBG | CfgFile = "/ Users / todd / .docker / machine / machine / registry / registry / registry.vbox"
(Registrierung) DBG | SnapFldr = "/ Benutzer / todd / .docker / Maschine / Maschinen / Registrierung / Registrierung / Snapshots"
(Registrierung) DBG | LogFldr = "/ Benutzer / todd / .docker / Maschine / Maschinen / Registrierung / Registrierung / Protokolle"
(Registrierung) DBG | hardwareuuid = "16c87535-d443-4d18-8957-4a2a35e1a449"
(Registrierung) DBG | Speicher = 2048
(Registrierung) DBG | pagefusion = "aus"
(Registrierung) DBG | vram = 8
(Registrierung) DBG | cpuexecutioncap = 100
(Registrierung) DBG | hpet = "on"
(Registrierung) DBG | Chipsatz = "piix3"
(Registrierung) DBG | Firmware = "BIOS"
(Registrierung) DBG | cpus = 1
(Registrierung) DBG | pae = "on"
(Registrierung) DBG | longmode = "on"
(Registrierung) DBG | cpuid-portability-level = 0
(Registrierung) DBG | bootmenu = "deaktiviert"
(Registrierung) DBG | boot1 = "dvd"
(Registrierung) DBG | boot2 = "dvd"
(Registrierung) DBG | boot3 = "Festplatte"
(Registrierung) DBG | boot4 = "keine"
(Registrierung) DBG | acpi = "on"
(Registrierung) DBG | ioapic = "on"
(Registrierung) DBG | biossystemtimeoffset = 0
(Registrierung) DBG | rtcuseutc = "on"
(Registrierung) DBG | hwvirtex = "on"
(Registrierung) DBG | nestedpaging = "on"
(Registrierung) DBG | largepages = "on"
(Registrierung) DBG | vtxvpid = "on"
(Registrierung) DBG | vtxux = "on"
(Registrierung) DBG | paravirtprovider = "Standard"
(Registrierung) DBG | VMState = "läuft"
(Registrierung) DBG | VMStateChangeTime = "2016-01-07T05: 18: 39.037000000"
(Registrierung) DBG | Monitoranzahl = 1
(Registrierung) DBG | beschleunigen3d = "aus"
(Registrierung) DBG | Accelerate2dvideo = "aus"
(Registrierung) DBG | teleporterenabled = "aus"
(Registrierung) DBG | Teleporterport = 0
(Registrierung) DBG | teleporteraddress = ""
(Registrierung) DBG | teleporterpassword = ""
(Registrierung) DBG | tracing-enabled = "aus"
(Registrierung) DBG | tracing-allow-vm-access = "aus"
(Registrierung) DBG | tracing-config = ""
(Registrierung) DBG | autostart-enabled = "aus"
(Registrierung) DBG | Autostart-Verzögerung = 0
(Registrierung) DBG | defaultfrontend = ""
(Registrierung) DBG | storagecontrollername0 = "SATA"
(Registrierung) DBG | storagecontrollertype0 = "IntelAhci"
(Registrierung) DBG | storagecontrollerinstance0 = "0"
(Registrierung) DBG | storagecontrollermaxportcount0 = "30"
(Registrierung) DBG | storagecontrollerportcount0 = "30"
(Registrierung) DBG | storagecontrollerbootable0 = "on"
(Registrierung) DBG | "SATA-0-0" = "/ Users / todd / .docker / machine / machine / registry / boot2docker.iso"
(Registrierung) DBG | SATA-ImageUUID-0-0 = b732119e-8237-4676-9b30-b05814370564
(Registrierung) DBG | "SATA-tempeject" = "aus"
(Registrierung) DBG | "SATA-IsEjected" = "aus"
(Registrierung) DBG | "SATA-1-0" = "/ Users / todd / .docker / machine / machine / registry / disk.vmdk"
(Registrierung) DBG | SATA-ImageUUID-1-0 = 80791e9a-dbd2-488c-abe6-5128ea60fb54
(Registrierung) DBG | "SATA-2-0" = "keine"
(Registrierung) DBG | "SATA-3-0" = "keine"
(Registrierung) DBG | "SATA-4-0" = "keine"
(Registrierung) DBG | "SATA-5-0" = "keine"
(Registrierung) DBG | "SATA-6-0" = "keine"
(Registrierung) DBG | "SATA-7-0" = "keine"
(Registrierung) DBG | "SATA-8-0" = "keine"
(Registrierung) DBG | "SATA-9-0" = "keine"
(Registrierung) DBG | "SATA-10-0" = "keine"
(Registrierung) DBG | "SATA-11-0" = "keine"
(Registrierung) DBG | "SATA-12-0" = "keine"
(Registrierung) DBG | "SATA-13-0" = "keine"
(Registrierung) DBG | "SATA-14-0" = "keine"
(Registrierung) DBG | "SATA-15-0" = "keine"
(Registrierung) DBG | "SATA-16-0" = "keine"
(Registrierung) DBG | "SATA-17-0" = "keine"
(Registrierung) DBG | "SATA-18-0" = "keine"
(Registrierung) DBG | "SATA-19-0" = "keine"
(Registrierung) DBG | "SATA-20-0" = "keine"
(Registrierung) DBG | "SATA-21-0" = "keine"
(Registrierung) DBG | "SATA-22-0" = "keine"
(Registrierung) DBG | "SATA-23-0" = "keine"
(Registrierung) DBG | "SATA-24-0" = "keine"
(Registrierung) DBG | "SATA-25-0" = "keine"
(Registrierung) DBG | "SATA-26-0" = "keine"
(Registrierung) DBG | "SATA-27-0" = "keine"
(Registrierung) DBG | "SATA-28-0" = "keine"
(Registrierung) DBG | "SATA-29-0" = "keine"
(Registrierung) DBG | natnet1 = "nat"
(Registrierung) DBG | macaddress1 = "080027D369AC"
(Registrierung) DBG | Kabelverbindung1 = "ein"
(Registrierung) DBG | nic1 = "nat"
(Registrierung) DBG | nictype1 = "82540EM"
(Registrierung) DBG | nicspeed1 = "0"
(Registrierung) DBG | mtu = "0"
(Registrierung) DBG | sockSnd = "64"
(Registrierung) DBG | sockRcv = "64"
(Registrierung) DBG | tcpWndSnd = "64"
(Registrierung) DBG | tcpWndRcv = "64"
(Registrierung) DBG | Weiterleitung (0) = "ssh, tcp, 127.0.0.1,61554 ,, 22"
(Registrierung) DBG | hostonlyadapter2 = "vboxnet1"
(Registrierung) DBG | macaddress2 = "080027A8AF71"
(Registrierung) DBG | Kabelverbindung2 = "ein"
(Registrierung) DBG | nic2 = "nur hostly"
(Registrierung) DBG | nictype2 = "82540EM"
(Registrierung) DBG | nicspeed2 = "0"
(Registrierung) DBG | nic3 = "keine"
(Registrierung) DBG | nic4 = "keine"
(Registrierung) DBG | nic5 = "keine"
(Registrierung) DBG | nic6 = "keine"
(Registrierung) DBG | nic7 = "keine"
(Registrierung) DBG | nic8 = "keine"
(Registrierung) DBG | hidpointing = "ps2mouse"
(Registrierung) DBG | hidkeyboard = "ps2kbd"
(Registrierung) DBG | uart1 = "aus"
(Registrierung) DBG | uart2 = "aus"
(Registrierung) DBG | lpt1 = "aus"
(Registrierung) DBG | lpt2 = "aus"
(Registrierung) DBG | audio = "keine"
(Registrierung) DBG | Zwischenablage = "deaktiviert"
(Registrierung) DBG | draganddrop = "deaktiviert"
(Registrierung) DBG | SessionName = "kopflos"
(Registrierung) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(Registrierung) DBG | vrde = "aus"
(Registrierung) DBG | usb = "aus"
(Registrierung) DBG | ehci = "aus"
(Registrierung) DBG | xhci = "aus"
(Registrierung) DBG | SharedFolderNameMachineMapping1 = "Benutzer"
(Registrierung) DBG | SharedFolderPathMachineMapping1 = "/ Users"
(Registrierung) DBG | VRDEActiveConnection = "aus"
(Registrierung) DBG | VRDEClients = 0
(Registrierung) DBG | vcpenabled = "aus"
(Registrierung) DBG | vcpscreens = 0
(Registrierung) DBG | vcpfile = "/ Users / todd / .docker / machine / machine / registry / registry / registry.webm"
(Registrierung) DBG | vcpwidth = 1024
(Registrierung) DBG | vcpheight = 768
(Registrierung) DBG | vcprate = 512
(Registrierung) DBG | vcpfps = 25
(Registrierung) DBG | GuestMemoryBalloon = 0
(Registrierung) DBG | GuestOSType = "Linux26_64"
(Registrierung) DBG | GuestAdditionsRunLevel = 2
(Registrierung) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox-Basistreiber = 50,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(Registrierung) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(Registrierung) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(Registrierung) DBG | }}
(Registrierung) DBG | STDERR:
(Registrierung) DBG | {
(Registrierung) DBG | }}
(Registrierung) DBG | Verwenden des SSH-Clienttyps: extern
(Registrierung) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = quiet -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(Registrierung) DBG | Über den SSH-Befehl ausführen:
(Registrierung) DBG | ip addr show dev eth1
(Registrierung) DBG | SSH cmd err, Ausgabe:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | SSH zurückgegeben: 4: eth1:
(Registrierung) DBG | link / ether 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff: ff
(Registrierung) DBG | inet 192.168.99.104/24 brd 192.168.99.255 scope global eth1
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 scope link
(Registrierung) DBG | valid_lft für immer bevorzugt_lft für immer
(Registrierung) DBG |
(Registrierung) DBG | ENDE SSH
(Registrierung) DBG |
Lesen des CA-Zertifikats von /Users/todd/.docker/machine/certs/ca.pem
Serverzertifikat aus /Users/todd/.docker/machine/machines/registry/server.pem lesen
Lesen des Serverschlüssels aus /Users/todd/.docker/machine/machines/registry/server-key.pem
Splines retikulieren ...
(Registrierung) Aufruf von .GetConfigRaw
Anruf zum Schließen des Treiberservers
(Flag-Lookup) Aufruf von .Close
Erfolgreicher Aufruf zum Schließen des Treiberservers
f2ef4387b95e: Prüfsumme überprüfen
f2ef4387b95e: Download abgeschlossen
75ed0b50ba1d: Überprüfen der Prüfsumme
75ed0b50ba1d: Download abgeschlossen
e5ab901dcf2d: Fertig ziehen
30ad296c0ea0: Vollständig ziehen
3dba40dec256: Vollständig ziehen
f2ef4387b95e: Vollständig ziehen
53bc8dcc4791: Fertig ziehen
75ed0b50ba1d: Fertig ziehen
17c3a7ed5521: Vollständig ziehen
8aca9e0ecf68: Fertig ziehen
4d1828359d36: Fertig ziehen
46ed7df7f742: Fertig ziehen
b5e8ce623ef8: Vollständig ziehen
049dca6ef253: Vollständig ziehen
bdb608bc4555: Vollständig ziehen
8b3d489cfb73: Vollständig ziehen
c74500bbce24: Vollständig ziehen
9f3e605442f6: Fertig ziehen
d9125e9e799b: Vollständig ziehen
Digest: sha256: 8cc8023462905929df9a79ff67ee435a36848ce7a10f18d6d0faba9306b97274
Status: Heruntergeladenes neueres Bild für Progrium / Konsul: Neueste
Der Push bezieht sich auf ein Repository 192.168.99.104:5000/consul
3ba9d8714085: Download abgeschlossen
5768a21d659b: Prüfsumme überprüfen
5768a21d659b: Download abgeschlossen
5077391c6e9a: Überprüfen der Prüfsumme
5077391c6e9a: Download abgeschlossen
3ba9d8714085: Fertig ziehen
e5f84a8bf706: Überprüfen der Prüfsumme
e5f84a8bf706: Download abgeschlossen
1652c4d60eb0: Vollständig ziehen
1be01d0718a5: Fertig ziehen
6c0449c9e602: Überprüfen der Prüfsumme
6c0449c9e602: Download abgeschlossen
1f9207dd15f1: Fertig ziehen
6c0449c9e602: Fertig ziehen
32e4dbc22c81: Fertig ziehen
e5f84a8bf706: Vollständig ziehen
b212be34ea89: Vollständig ziehen
5768a21d659b: Vollständig ziehen
5077391c6e9a: Fertig ziehen
a1c47b5aade9: Fertig ziehen
Digest: sha256: 74af3b0da0e693e4c1b3ab18602b70b9f5a1135971f12f00b3c2d4d046f8c63f
Status: Heruntergeladenes neueres Bild für Google / Cadvisor: Neueste
Der Push bezieht sich auf ein Repository 192.168.99.104:5000/cadvisor
Bildliste senden
Aufruf zum Schließen der Verbindung zur Plugin-Binärdatei
(Flag-Lookup) DBG | Plugin auf der Serverseite schließen
Anruf zum Schließen des Treiberservers
(Registrierung) Aufruf .Close
Erfolgreicher Aufruf zum Schließen des Treiberservers
Aufruf zum Schließen der Verbindung zur Plugin-Binärdatei
(Registrierung) DBG | Plugin auf der Serverseite schließen
Fehler beim Ausführen der Verbindungs-Boilerplate: Fehler beim Überprüfen und / oder erneuten Generieren der Zertifikate: Beim Überprüfen der Zertifikate für Host "192.168.99.104:2376" ist ein Fehler aufgetreten: Wählen Sie TCP 192.168.99.104:2376: Getsockopt: Verbindung abgelehnt
Sie können versuchen, sie mit 'docker-machine regenerate-certs [name]' zu regenerieren.
Beachten Sie, dass dies einen Neustart des Docker-Daemons auslöst, bei dem keine Container mehr ausgeführt werden.
tdensmore
am 7. Jan. 2016
Gleiches Problem unter dem neuesten OSX
Fehler beim Überprüfen der TLS-Verbindung: Fehler beim Überprüfen und / oder erneuten Generieren der Zertifikate: Beim Überprüfen der Zertifikate für den Host "192.168.99.100:2376" ist ein Fehler aufgetreten: Lesen Sie TCP 192.168.99.1:56629-> 192.168.99.100:2376: Lesen: Zurücksetzen der Verbindung durch Peer
Sie können versuchen, sie mit 'docker-machine regenerate-certs [name]' zu regenerieren.
Beachten Sie, dass dies einen Neustart des Docker-Daemons auslöst, bei dem keine Container mehr ausgeführt werden.
Aus heiterem Himmel..
Gibt es eine Lösung dafür?
Tun:
rm -rf /var/lib/docker/network
und ein Neustart meines Terminals scheint dies vorerst zu beheben;
sehr sehr frustrierend!
maxa4e
am 8. Jan. 2016
Ich habe dieses Problem mit Viktor von Docker gesehen, zumindest in seinem Fall scheint es damit zu tun zu haben, dass versucht wird, env unmittelbar nach dem Ende von start (in einem Skript) auszuführen. Es scheint, dass wir vielleicht warten sollten, bis der Docker-Dämon aktiv ist, wenn start , oder das TLS-Wählzeitlimit erhöhen sollten.
nathanleclaire
am 12. Jan. 2016
Was ist der Fehler, den Viktor sieht?
dgageot
am 13. Jan. 2016
@dgageot Grundsätzlich gab es ein Skript, das folgenden Code enthielt:
if [[ $(docker-machine status $VM) != "Running" ]]; then
docker-machine start $VM
fi
eval $(docker-machine env $VM)
In der Zeile env wird ein Fehler ausgegeben, der besagt, dass beim Versuch, eine Verbindung zum Endpunkt herzustellen, das TLS-Wählrad abgelaufen ist. Es scheint daran zu liegen, dass der Docker-Daemon noch nicht gestartet wurde, obwohl start bereits zurückgekehrt war. (Was Sinn macht - VirtualBox, das anzeigt, dass die VM "läuft", bedeutet nicht unbedingt, dass alle Systemdienste gestartet sind und noch abhören.)
nathanleclaire
am 13. Jan. 2016
Ich habe dieses Problem mit Viktor von Docker gesehen, zumindest in seinem Fall scheint es damit zu tun zu haben, dass env unmittelbar nach Abschluss eines Starts (in einem Skript) ausgeführt werden soll.
@nathanleclaire @dgageot Siehe meine beiden Kommentare hier und hier zu diesem Thema vor etwas mehr als einer Woche, die dieselbe Beobachtung machen, mit ein wenig mehr Informationen und Skripten, die reproduziert werden müssen.
cjerdonek
am 13. Jan. 2016
Vielen Dank an @cjerdonek. Vielleicht möchten Sie https://github.com/docker/machine/issues/2936 ausprobieren, um zu sehen, ob das Problem dadurch für Sie behoben wird .
nathanleclaire
am 27. Jan. 2016
Verwandte Themen
Mayur-Sapre2
·
4Kommentare
masaeedu
·
4Kommentare
jimfleming
·
5Kommentare
jrz
·
5Kommentare
pc-mreeves
·
4Kommentare
Hilfreichster Kommentar
Auch das erleben. Ich habe es gleich nach dem Aktualisieren der Toolbox und auch heute Morgen nach dem Booten meines Computers erhalten.
Das Stoppen und Starten der VM verursacht das Problem nicht.
Wenn Sie
docker-machine regenerate-certs <name>ausführen, können Sie wieder loslegen.