Machine: La máquina insiste en regenerar certificados que deberían ser válidos
Máquina 0.5 instalada a través de Toolbox 1.9.0.
docker is configured to use the default machine with IP 192.168.99.100
For help getting started, check out the docs at https://docs.docker.com
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": dial tcp 192.168.99.100:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
amylindburg
Todos 55 comentarios
También he visto problemas como este (aunque el mío fue con swarm) y creo que tiene que ver con que el marcador está defectuoso. La dirección IP debería ser totalmente accesible, por lo que no estoy seguro de qué está pasando aquí. cc @ docker / mantenedores de máquinas
nathanleclaire
en 4 nov. 2015
Me encontré con lo mismo en Arch Linux.
Editar: rebajar a 0.4.1 soluciona esto por mí.
vikstrous
en 5 nov. 2015
También experimentando esto. Lo obtuve justo después de actualizar la caja de herramientas, y también esta mañana después de arrancar mi computadora.
Detener e iniciar la máquina virtual no causa el problema.
Ejecutar docker-machine regenerate-certs <name> te pone en marcha de nuevo.
sjparkinson
en 5 nov. 2015
reiniciar el sistema operativo del host (osx en mi caso) funcionó para mí.
sqpdln
en 9 nov. 2015
fwiw He estado encontrando errores "certs" como este en diferentes servidores de Docker 1.9 (boot2docker, debian). Pero supongo que el problema es que el servidor Docker no se está iniciando; cuando reviso docker.log, tiene mensajes como los siguientes.
time="2015-11-13T18:20:36.304725934Z" level=fatal msg="Error starting daemon: Error initializing network controller: could not delete the default bridge network: network bridge has active endpoints"
Hacer un rm -rf /var/lib/docker/network en el servidor de la ventana acoplable como se sugiere en https://github.com/docker/docker/issues/17846 y reiniciarlo me soluciona el problema.
jamshid
en 13 nov. 2015
Interesante, gracias por el informe @jamshid.
nathanleclaire
en 13 nov. 2015
Tuve el mismo error después de actualizar a 0.5 desde 0.3 en Arch Linux y actualizar una ventana acoplable remota.
El demonio de la ventana acoplable remota se estaba ejecutando con seguridad, ya que todos los sitios que estoy alojando todavía estaban activos.
La regeneración de los certificados falló diciendo que ca.pem no era un archivo o directorio.
Reiniciar la máquina de desarrollo no tuvo ningún impacto.
Se instaló 0.4.1 y volvió a estar en funcionamiento.
JoshWillik
en 16 nov. 2015
Lo siento. Olvidé que la descarga 0.4.1 era un solo binario ...
tdensmore
en 19 nov. 2015
@tdensmore La degradación funcionó así:
git clone https://aur.archlinux.org/docker-machine.git
cd docker-machine
git checkout fa09daa8f85b31880b93 # Version 4.1.1
makepkg
pacman -U docker-machine-1:0.4.1-1-x86_64.pkg.tar.xz
Gracias @JoshWillik
tdensmore
en 19 nov. 2015
Estoy experimentando este problema en Windows 10 con una nueva instalación de Docker Toolbox.
C: \ Users \ gjstocker> docker-machine env predeterminado
Error al ejecutar el texto estándar de conexión: Error al verificar y / o regenerar los certificados: Hubo un error> validando certificados para el host "192.168.99.100:2376": error remoto: certificado incorrecto
Puede intentar regenerarlos usando 'docker-machine regenerate-certs name'.
Tenga en cuenta que esto activará un reinicio del demonio Docker que detendrá la ejecución de contenedores.
Ni ejecutar este comando ni reiniciar Windows resuelve este problema. Estoy ejecutando Windows 10 en Parallels en Mac OS X Yosemite; que por cierto también tiene Docker instalado.
gortok
en 25 nov. 2015
Lo mismo aquí en OS X Yosemite. Incluso ejecutar el comando docker-machine regenerate-certs default me dio el siguiente error:
WARNING >>>
This machine has been allocated an IP address, but Docker Machine could not
reach it successfully.
SSH for the machine should still work, but connecting to exposed ports, such as
the Docker daemon port (usually <ip>:2376), may not work properly.
You may need to add the route manually, or use another related workaround.
This could be due to a VPN, proxy, or host file configuration issue.
Fue entonces cuando me di cuenta de que en realidad estaba en una VPN. Apagó eso y el comando de regeneración funciona bien. Todavía tendría que averiguar cómo hacer que la ventana acoplable se ejecute con la VPN encendida, pero puede hacerlo por ahora. Espero que esto ayude
DrunkenBeetle
en 25 nov. 2015
He estado haciendo esto regularmente desde que actualicé a Docker 1.9; parece que tengo que regenerar certificados cada vez que inicio una máquina acoplable
lizrice
en 25 nov. 2015
Hola a todos, todavía no he podido reproducir la versión de "malos certificados" de este error (pensé que podría haber tenido una pista, pero parece haber resultado ser una pista falsa), así que publique el resultado de:
$ docker-machine --debug env default
$ docker-machine --debug regenerate-certs -f default
si / cuando tienes la oportunidad y aparece este error. ¡Gracias!
nathanleclaire
en 26 nov. 2015
Aquí tienes, ¡espero que esto te ayude!
$ docker-machine --debug env betterrecs
Docker Machine Version: 0.5.0 (04cfa58)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:55238
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
(betterrecs) Calling RpcServerDriver.GetState
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) Calling RpcServerDriver.GetURL
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="6">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="7">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
(betterrecs) DBG |
Reading CA certificate from /Users/liz/.docker/machine/certs/ca.pem
Reading server certificate from /Users/liz/.docker/machine/machines/betterrecs/server.pem
Reading server key from /Users/liz/.docker/machine/machines/betterrecs/server-key.pem
shell: bash
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/liz/.docker/machine/machines/betterrecs"
export DOCKER_MACHINE_NAME="betterrecs"
# Run this command to configure your shell:
# eval "$(docker-machine --debug env betterrecs)"
$ docker-machine --debug regenerate-certs -f betterrecs
Docker Machine Version: 0.5.0 (04cfa58)
Regenerating TLS certificates
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:55279
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
command=configureAuth machine=betterrecs
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
cat /etc/os-release
SSH cmd err, output: <nil>: NAME=Boot2Docker
VERSION=1.9.0
ID=boot2docker
ID_LIKE=tcl
VERSION_ID=1.9.0
PRETTY_NAME="Boot2Docker 1.9.0 (TCL 6.4); master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015"
ANSI_COLOR="1;34"
HOME_URL="http://boot2docker.io"
SUPPORT_URL="https://github.com/boot2docker/boot2docker"
BUG_REPORT_URL="https://github.com/boot2docker/boot2docker/issues"
found compatible host: boot2docker
(betterrecs) Calling RpcServerDriver.GetMachineName
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /usr/bin/sethostname betterrecs && echo "betterrecs" | sudo tee /var/lib/boot2docker/etc/hostname
SSH cmd err, output: <nil>: Setting hostname to betterrecs Done.
betterrecs
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55283 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17374 /var/lib/docker/network/files/88373595910d3af10ee42387d0e36e63da4c6ebb7c0898d4170f8b1a37053d16.sock
unix 2 [ ACC ] STREAM LISTENING 17292 /var/run/docker.sock
unix 2 [ ACC ] STREAM LISTENING 17040 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 18497
unix 3 [ ] STREAM CONNECTED 18496
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo mkdir -p /var/lib/boot2docker
SSH cmd err, output: <nil>:
(betterrecs) Calling RpcServerDriver.GetMachineName
(betterrecs) Calling RpcServerDriver.GetIP
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="8">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
Copying certs to the local machine directory...
(betterrecs) DBG |
generating server cert: /Users/liz/.docker/machine/machines/betterrecs/server.pem ca-key=/Users/liz/.docker/machine/certs/ca.pem private-key=/Users/liz/.docker/machine/certs/ca-key.pem org=liz.betterrecs
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker stop
SSH cmd err, output: <nil>:
Copying certs to the remote machine...
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----
MIICxTCCAa+gAwIBAgIQG+7IaWezmEtyKdTY0XwKTzALBgkqhkiG9w0BAQswDjEM
MAoGA1UEChMDbGl6MB4XDTE1MDkyNDE4MDIwMFoXDTE4MDkwODE4MDIwMFowDjEM
MAoGA1UEChMDbGl6MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAu3sM
lzFTb6qOsovgwFz/GEIN/lC1h8i9MIUt5LWF17MBp23aT15HTXy5GTuhfnXh3kPS
KKn5XzWvXQ9JILDIemIy8r/cO1ceGP1HYOtFtyuaJqle34UcFvIe9uH9KXB/Kh+a
fvQbXFuj67LODcUMD76pQd7YvB/D+G56gTFhrmOQQRCGHgj2ySgLcEr0TgtTbBiy
GyZl5N9uBPvwQNVXVKYQdK12VJSFIjY8zx/2Z7hmp6jCEcFcHtmHbw/hT/ReTTmR
ZQaXZrbAqWOdMbeNBbNIcnWNmdv/BED0l0K6d7x017f066BxrUA1HIq1rXClqeym
iKFg0gfQGyG3bYZb2QIDAQABoyMwITAOBgNVHQ8BAf8EBAMCAKwwDwYDVR0TAQH/
BAUwAwEB/zALBgkqhkiG9w0BAQsDggEBAF65b1uUdG4nj49N5rtVy+2me6fJos7N
VlhbfXBjO6lmsoaDDP7qndmUnYVWUCgdLaXZj+NlVxAT9n8LVVOBtik9lda0VGxU
R2iwZHCOWky+3BCs2zrTP2pJlO95jlQ31/wz6qbBNAIxHC8bCH15gWAEB202l+Hs
EDbvoGlGHiC3PY4q6EBJTuo/hT31P0WPz8+CPivkm184tYwG4zbPTh6auTZz5FAw
amfFvAvV+JZ+2V0ftJdjZbqCxOSccU/BSZOl34TKvjgtDgRZv7ZH7QoCMrK/INWH
tSC3vZZOW++swflG6ZNiRlOKAt0Mtqbfbqup2Fo4KnGi7byCcXm8c/M=
-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/ca.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/server.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
' | sudo tee /var/lib/boot2docker/server-key.pem
SSH cmd err, output: <nil>: -----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
(betterrecs) Calling RpcServerDriver.GetURL
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="9">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) Calling RpcServerDriver.DriverName
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
(betterrecs) DBG |
Setting Docker configuration on the remote daemon...
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf %s "
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
" | sudo tee /var/lib/boot2docker/profile
SSH cmd err, output: <nil>:
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker start
SSH cmd err, output: <nil>: Need TLS certs for betterrecs,127.0.0.1,10.0.2.15,192.168.99.100
-------------------
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55283 TIME_WAIT
tcp 36 0 10.0.2.15:ssh 10.0.2.2:55293 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17040 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 19069
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 19070
(betterrecs) Calling RpcServerDriver.GetSSHHostname
(betterrecs) Calling RpcServerDriver.GetSSHPort
(betterrecs) Calling RpcServerDriver.GetSSHKeyPath
(betterrecs) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55295 ESTABLISHED
tcp 0 0 10.0.2.15:ssh 10.0.2.2:55283 TIME_WAIT
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 19165 /var/lib/docker/network/files/f05a6ec02bfcb2b05f6cd8ba3e2063a24fe362e6f85258d4878343ce26775030.sock
unix 2 [ ACC ] STREAM LISTENING 17040 /var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 19098 /var/run/docker.sock
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 19278
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 19279
(betterrecs) Calling RpcServerDriver.GetIP
(betterrecs) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo betterrecs --machinereadable
(betterrecs) DBG | STDOUT:
(betterrecs) DBG | {
(betterrecs) DBG | name="betterrecs"
(betterrecs) DBG | groups="/"
(betterrecs) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(betterrecs) DBG | UUID="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | CfgFile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.vbox"
(betterrecs) DBG | SnapFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Snapshots"
(betterrecs) DBG | LogFldr="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/Logs"
(betterrecs) DBG | hardwareuuid="238a0ef9-bb37-4a1b-ac17-9d16de5baa7a"
(betterrecs) DBG | memory=1024
(betterrecs) DBG | pagefusion="off"
(betterrecs) DBG | vram=8
(betterrecs) DBG | cpuexecutioncap=100
(betterrecs) DBG | hpet="on"
(betterrecs) DBG | chipset="piix3"
(betterrecs) DBG | firmware="BIOS"
(betterrecs) DBG | cpus=1
(betterrecs) DBG | pae="on"
(betterrecs) DBG | longmode="on"
(betterrecs) DBG | cpuid-portability-level=0
(betterrecs) DBG | bootmenu="disabled"
(betterrecs) DBG | boot1="dvd"
(betterrecs) DBG | boot2="dvd"
(betterrecs) DBG | boot3="disk"
(betterrecs) DBG | boot4="none"
(betterrecs) DBG | acpi="on"
(betterrecs) DBG | ioapic="on"
(betterrecs) DBG | biossystemtimeoffset=0
(betterrecs) DBG | rtcuseutc="on"
(betterrecs) DBG | hwvirtex="on"
(betterrecs) DBG | nestedpaging="on"
(betterrecs) DBG | largepages="on"
(betterrecs) DBG | vtxvpid="on"
(betterrecs) DBG | vtxux="on"
(betterrecs) DBG | paravirtprovider="default"
(betterrecs) DBG | VMState="running"
(betterrecs) DBG | VMStateChangeTime="2015-11-27T10:23:34.525000000"
(betterrecs) DBG | monitorcount=1
(betterrecs) DBG | accelerate3d="off"
(betterrecs) DBG | accelerate2dvideo="off"
(betterrecs) DBG | teleporterenabled="off"
(betterrecs) DBG | teleporterport=0
(betterrecs) DBG | teleporteraddress=""
(betterrecs) DBG | teleporterpassword=""
(betterrecs) DBG | tracing-enabled="off"
(betterrecs) DBG | tracing-allow-vm-access="off"
(betterrecs) DBG | tracing-config=""
(betterrecs) DBG | autostart-enabled="off"
(betterrecs) DBG | autostart-delay=0
(betterrecs) DBG | defaultfrontend=""
(betterrecs) DBG | storagecontrollername0="SATA"
(betterrecs) DBG | storagecontrollertype0="IntelAhci"
(betterrecs) DBG | storagecontrollerinstance0="0"
(betterrecs) DBG | storagecontrollermaxportcount0="30"
(betterrecs) DBG | storagecontrollerportcount0="30"
(betterrecs) DBG | storagecontrollerbootable0="on"
(betterrecs) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/betterrecs/boot2docker.iso"
(betterrecs) DBG | "SATA-ImageUUID-0-0"="824cf97a-8370-4b44-9b51-38ac90fc79cb"
(betterrecs) DBG | "SATA-tempeject"="off"
(betterrecs) DBG | "SATA-IsEjected"="off"
(betterrecs) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/betterrecs/disk.vmdk"
(betterrecs) DBG | "SATA-ImageUUID-1-0"="dadaea90-3840-497d-b0bc-c25f0f8bb124"
(betterrecs) DBG | "SATA-2-0"="none"
(betterrecs) DBG | "SATA-3-0"="none"
(betterrecs) DBG | "SATA-4-0"="none"
(betterrecs) DBG | "SATA-5-0"="none"
(betterrecs) DBG | "SATA-6-0"="none"
(betterrecs) DBG | "SATA-7-0"="none"
(betterrecs) DBG | "SATA-8-0"="none"
(betterrecs) DBG | "SATA-9-0"="none"
(betterrecs) DBG | "SATA-10-0"="none"
(betterrecs) DBG | "SATA-11-0"="none"
(betterrecs) DBG | "SATA-12-0"="none"
(betterrecs) DBG | "SATA-13-0"="none"
(betterrecs) DBG | "SATA-14-0"="none"
(betterrecs) DBG | "SATA-15-0"="none"
(betterrecs) DBG | "SATA-16-0"="none"
(betterrecs) DBG | "SATA-17-0"="none"
(betterrecs) DBG | "SATA-18-0"="none"
(betterrecs) DBG | "SATA-19-0"="none"
(betterrecs) DBG | "SATA-20-0"="none"
(betterrecs) DBG | "SATA-21-0"="none"
(betterrecs) DBG | "SATA-22-0"="none"
(betterrecs) DBG | "SATA-23-0"="none"
(betterrecs) DBG | "SATA-24-0"="none"
(betterrecs) DBG | "SATA-25-0"="none"
(betterrecs) DBG | "SATA-26-0"="none"
(betterrecs) DBG | "SATA-27-0"="none"
(betterrecs) DBG | "SATA-28-0"="none"
(betterrecs) DBG | "SATA-29-0"="none"
(betterrecs) DBG | natnet1="nat"
(betterrecs) DBG | macaddress1="08002733C33D"
(betterrecs) DBG | cableconnected1="on"
(betterrecs) DBG | nic1="nat"
(betterrecs) DBG | nictype1="82540EM"
(betterrecs) DBG | nicspeed1="0"
(betterrecs) DBG | mtu="0"
(betterrecs) DBG | sockSnd="64"
(betterrecs) DBG | sockRcv="64"
(betterrecs) DBG | tcpWndSnd="64"
(betterrecs) DBG | tcpWndRcv="64"
(betterrecs) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,49214,,22"
(betterrecs) DBG | hostonlyadapter2="vboxnet0"
(betterrecs) DBG | macaddress2="0800277330F8"
(betterrecs) DBG | cableconnected2="on"
(betterrecs) DBG | nic2="hostonly"
(betterrecs) DBG | nictype2="82540EM"
(betterrecs) DBG | nicspeed2="0"
(betterrecs) DBG | nic3="none"
(betterrecs) DBG | nic4="none"
(betterrecs) DBG | nic5="none"
(betterrecs) DBG | nic6="none"
(betterrecs) DBG | nic7="none"
(betterrecs) DBG | nic8="none"
(betterrecs) DBG | hidpointing="ps2mouse"
(betterrecs) DBG | hidkeyboard="ps2kbd"
(betterrecs) DBG | uart1="off"
(betterrecs) DBG | uart2="off"
(betterrecs) DBG | lpt1="off"
(betterrecs) DBG | lpt2="off"
(betterrecs) DBG | audio="none"
(betterrecs) DBG | clipboard="disabled"
(betterrecs) DBG | draganddrop="disabled"
(betterrecs) DBG | SessionName="headless"
(betterrecs) DBG | VideoMode="720,400,0"<strong i="10">@0</strong>,0 1
(betterrecs) DBG | vrde="off"
(betterrecs) DBG | usb="off"
(betterrecs) DBG | ehci="off"
(betterrecs) DBG | xhci="off"
(betterrecs) DBG | SharedFolderNameMachineMapping1="Users"
(betterrecs) DBG | SharedFolderPathMachineMapping1="/Users"
(betterrecs) DBG | VRDEActiveConnection="off"
(betterrecs) DBG | VRDEClients=0
(betterrecs) DBG | vcpenabled="off"
(betterrecs) DBG | vcpscreens=0
(betterrecs) DBG | vcpfile="/Users/liz/.docker/machine/machines/betterrecs/betterrecs/betterrecs.webm"
(betterrecs) DBG | vcpwidth=1024
(betterrecs) DBG | vcpheight=768
(betterrecs) DBG | vcprate=512
(betterrecs) DBG | vcpfps=25
(betterrecs) DBG | GuestMemoryBalloon=0
(betterrecs) DBG | GuestOSType="Linux26_64"
(betterrecs) DBG | GuestAdditionsRunLevel=2
(betterrecs) DBG | GuestAdditionsVersion="5.0.8 r103449"
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1448619842592
(betterrecs) DBG | GuestAdditionsFacility_Seamless Mode=0,1448619834843
(betterrecs) DBG | GuestAdditionsFacility_Graphics Mode=0,1448619834843
(betterrecs) DBG | }
(betterrecs) DBG | STDERR:
(betterrecs) DBG | {
(betterrecs) DBG | }
(betterrecs) DBG | Using SSH client type: external
(betterrecs) DBG | About to run SSH command:
(betterrecs) DBG | ip addr show dev eth1
(betterrecs) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(betterrecs) DBG | link/ether 08:00:27:73:30:f8 brd ff:ff:ff:ff:ff:ff
(betterrecs) DBG | inet 192.168.99.100/24 brd 192.168.99.255 scope global eth1
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG | inet6 fe80::a00:27ff:fe73:30f8/64 scope link
(betterrecs) DBG | valid_lft forever preferred_lft forever
(betterrecs) DBG |
(betterrecs) DBG | END SSH
(betterrecs) DBG |
(betterrecs) Calling RpcServerDriver.GetConfigRaw
(betterrecs) Calling RpcServerDriver.GetConfigRaw
Gracias @lizrice
nathanleclaire
en 30 nov. 2015
Entonces @lizrice , para confirmar mi comprensión: al final de la creación, todo parece ir bien, pero luego env ahoga con el mensaje de error mencionado anteriormente. ¿Y regenerate-certs arregla?
EDITAR : Parece que el env enumerado anteriormente es saludable. ¿Puede publicar la salida de depuración de una invocación env que falla?
nathanleclaire
en 30 nov. 2015
si eso es
El lunes 30 de noviembre de 2015 a las 22:39, Nathan LeClaire [email protected]
escribió:
Entonces @lizrice https://github.com/lizrice , para confirmar mi comprensión: en
al final de la creación, todo parece ir bien, pero luego env se ahoga
con el mensaje de error mencionado anteriormente? ¿Y regenerate-certs lo arregla?-
Responda a este correo electrónico directamente o véalo en GitHub
https://github.com/docker/machine/issues/2175#issuecomment -160784509.
lizrice
en 1 dic. 2015
Tengo el mismo problema, excepto que regenerate-certs _no_ soluciona el problema. Puedo pegar la salida de esos comandos para mi máquina; pero, ¿esas claves de certificado son claves públicas o privadas?
gortok
en 1 dic. 2015
Tenía este mismo problema en osx. Regenerar los certificados no funcionó:
A esta máquina se le ha asignado una dirección IP, pero Docker Machine no pudo
alcanzarlo con éxito.
SSH para la máquina aún debería funcionar, pero conectándose a puertos expuestos, como
el puerto del demonio de Docker (normalmente
Es posible que deba agregar la ruta manualmente o utilizar otra solución alternativa relacionada.
Esto podría deberse a un problema de configuración de archivos de host, proxy o VPN.
Parecía que la ruta a la caja no estaba configurada correctamente. La creación de una nueva máquina acoplable tampoco funcionó; sin embargo, la creación de una nueva máquina con vmwarefusion funcionó correctamente.
pachuc
en 1 dic. 2015
Reiniciar mi computadora también soluciona el problema.
pachuc
en 1 dic. 2015
@gortok Private, es posible que desee eliminarlos antes de publicarlos.
nathanleclaire
en 2 dic. 2015
@lizrice No entiendo. El comando env en su ejemplo publicado escupe lo que esperaría ver, pero no el mensaje de error "modelo de conexión".
nathanleclaire
en 2 dic. 2015
Lo comprobaré la próxima vez que vea que esto suceda, pero creo que publiqué
todo lo que tengo
El miércoles 2 de diciembre de 2015 a las 01:19, Nathan LeClaire [email protected]
escribió:
@lizrice https://github.com/lizrice No entiendo. El comando env
en su ejemplo publicado escupe lo que esperaría ver, pero no el
Mensaje de error "plantilla de conexión".-
Responda a este correo electrónico directamente o véalo en GitHub
https://github.com/docker/machine/issues/2175#issuecomment -161148632.
lizrice
en 2 dic. 2015
¿Esto ayuda?
$ docker-machine start force12
Started machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
$ docker-machine env force12
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": x509: certificate is valid for 192.168.99.101, not 192.168.99.100
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
$ docker-machine regenerate-certs force12
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): y
Regenerating TLS certificates
Copying certs to the local machine directory...
Copying certs to the remote machine...
Setting Docker configuration on the remote daemon...
$ docker-machine env force12
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/liz/.docker/machine/machines/force12"
export DOCKER_MACHINE_NAME="force12"
# Run this command to configure your shell:
# eval "$(docker-machine env force12)"
@lizrice Closer - Necesito ese segundo comando que imprimió el mensaje "Error al ejecutar la placa de caldera de conexión", ejecutar con --debug habilitado, para poder inspeccionar lo que está sucediendo con más detalle.
nathanleclaire
en 3 dic. 2015
Hola @nathanleclaire
Estoy experimentando este problema al igual que esta mañana.
Aquí está mi entorno:
$ dm --version
dm version 0.5.2 ( 0456b9f )
$ docker --version
Docker version 1.9.0, build 76d6bc9
$ VirtualBox --help
Oracle VM VirtualBox Manager 5.0.10
$ system_profiler SPSoftwareDataType
Software:
System Software Overview:
System Version: OS X 10.10.5 (14F1021)
Kernel Version: Darwin 14.5.0
Estos son los errores que veo al intentar evaluar el entorno de host de Docker
$ dm ls
NAME ACTIVE DRIVER STATE URL SWARM ERRORS
dev - virtualbox Running tcp://192.168.99.100:2376
$ dm env dev
Error checking TLS connection: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": dial tcp 192.168.99.100:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs [name]'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
$ docker-machine regenerate-certs dev
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): y
Regenerating TLS certificates
Detecting the provisioner...
Unable to verify the Docker daemon is listening: Maximum number of retries (5) exceeded
Prueba de que el host de Docker está activo
$ docker-machine ssh dev
## .
## ## ## ==
## ## ## ## ## ===
/"""""""""""""""""\___/ ===
~~~ {~~ ~~~~ ~~~ ~~~~ ~~~ ~ / ===- ~~~
\______ o __/
\ \ __/
\____\_______/
_ _ ____ _ _
| |__ ___ ___ | |_|___ \ __| | ___ ___| | _____ _ __
| '_ \ / _ \ / _ \| __| __) / _` |/ _ \ / __| |/ / _ \ '__|
| |_) | (_) | (_) | |_ / __/ (_| | (_) | (__| < __/ |
|_.__/ \___/ \___/ \__|_____\__,_|\___/ \___|_|\_\___|_|
Boot2Docker version 1.9.0, build master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015
Docker version 1.9.0, build 76d6bc9
docker<strong i="15">@dev</strong>:~$
Y aquí está la salida de los comandos a los que hizo referencia aquí
Enlace al Gist que contiene la salida => https://gist.github.com/Dangeranger/4f139d7acf530f6c4ec0)
Dangeranger
en 3 dic. 2015
ACTUALIZACIÓN: @nathanleclaire
Ejecutar lo siguiente funcionó para solucionar el problema con la evaluación del entorno del host de la ventana acoplable.
De esta respuesta de https://github.com/chiavegatto en https://github.com/docker/docker/issues/17846
https://github.com/docker/docker/issues/17846#issuecomment -155233858
$ docker-machine ssh dev
Boot2Docker version 1.9.0, build master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015
Docker version 1.9.0, build 76d6bc9
$ sudo -i
$ rm -rf /var/lib/docker/network
# exit from the Docker host and then run
$ docker-machine env dev
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/mansfield/.docker/machine/machines/dev"
export DOCKER_MACHINE_NAME="dev"
# Run this command to configure your shell:
# eval "$(dm env dev)"
: confetti_ball:: boom:: +1:
¡Buena suerte!
Dangeranger
en 3 dic. 2015
@Dangeranger ¿ Pero la ruta es accesible? es decir, ¿puedes ping 192.168.99.100 ?
EDITAR : Acabo de ver el segundo comentario. Muy peculiar.
nathanleclaire
en 3 dic. 2015
@nathanleclaire ¡ Sí, de hecho!
$ docker-machine env dev
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.100:2376"
export DOCKER_CERT_PATH="/Users/mansfield/.docker/machine/machines/dev"
export DOCKER_MACHINE_NAME="dev"
$ ping -c 3 192.168.99.100
PING 192.168.99.100 (192.168.99.100): 56 data bytes
64 bytes from 192.168.99.100: icmp_seq=0 ttl=64 time=0.219 ms
64 bytes from 192.168.99.100: icmp_seq=1 ttl=64 time=0.423 ms
64 bytes from 192.168.99.100: icmp_seq=2 ttl=64 time=0.387 ms
--- 192.168.99.100 ping statistics ---
3 packets transmitted, 3 packets received, 0.0% packet loss
round-trip min/avg/max/stddev = 0.219/0.343/0.423/0.089 ms
Si este es un tema aparte, mis disculpas;
Me encuentro con tener que regenerar certificados cada vez que docker-machine se detiene y docker-machine se inicia una máquina creada con el controlador AWS. Esto parece estar relacionado con el cambio de direcciones IP de la máquina acoplable. Extraño. Sin duda, debería admitirse un cambio de IP.
docker-machine --debug env docker-machine-`hostname`
Docker Machine Version: 0.5.2 ( 0456b9f )
Found binary path at /usr/local/bin/docker-machine-driver-amazonec2
Launching plugin server for driver amazonec2
Plugin server listening at address 127.0.0.1:58207
() Calling .GetVersion
Using API Version 1
() Calling .SetConfigRaw
() Calling .GetMachineName
(docker-machine-12cu-acceptatie) Calling .GetState
(docker-machine-12cu-acceptatie) DBG | Making AWS API call with values:
(docker-machine-12cu-acceptatie) DBG | {
(docker-machine-12cu-acceptatie) DBG | "Action": [
(docker-machine-12cu-acceptatie) DBG | "DescribeInstances"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "InstanceId.1": [
(docker-machine-12cu-acceptatie) DBG | "i-fe0abf42"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "Version": [
(docker-machine-12cu-acceptatie) DBG | "2014-06-15"
(docker-machine-12cu-acceptatie) DBG | ]
(docker-machine-12cu-acceptatie) DBG | }
(docker-machine-12cu-acceptatie) Calling .GetURL
(docker-machine-12cu-acceptatie) DBG | Making AWS API call with values:
(docker-machine-12cu-acceptatie) DBG | {
(docker-machine-12cu-acceptatie) DBG | "Action": [
(docker-machine-12cu-acceptatie) DBG | "DescribeInstances"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "InstanceId.1": [
(docker-machine-12cu-acceptatie) DBG | "i-fe0abf42"
(docker-machine-12cu-acceptatie) DBG | ],
(docker-machine-12cu-acceptatie) DBG | "Version": [
(docker-machine-12cu-acceptatie) DBG | "2014-06-15"
(docker-machine-12cu-acceptatie) DBG | ]
(docker-machine-12cu-acceptatie) DBG | }
Reading CA certificate from /var/lib/jenkins/.docker/machine/certs/ca.pem
Reading server certificate from /var/lib/jenkins/.docker/machine/machines/docker-machine-12cu-acceptatie/server.pem
Reading server key from /var/lib/jenkins/.docker/machine/machines/docker-machine-12cu-acceptatie/server-key.pem
Error checking TLS connection: Error checking and/or regenerating the certs: There was an error validating certificates for host "52.29.84.243:2376": x509: certificate is valid for 52.28.126.68, not 52.29.84.243
You can attempt to regenerate them using 'docker-machine regenerate-certs [name]'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
Nota la:
There was an error validating certificates for host "52.29.84.243:2376": x509: certificate is valid for 52.28.126.68, not 52.29.84.243
tijszwinkels
en 7 dic. 2015
Creo que encontré el problema (pero no necesariamente la solución todavía).
docker-machine -v
docker-machine version 0.5.2 ( 0456b9f )
Este es un certificado de trabajo, que no solicita ser regenerado al reiniciar:
generado con: openssl x509 -in
Certificate:
Data:
Version: 3 (0x2)
Serial Number:
6e:c0:e7:43:47:6c:b7:55:db:35:96:da:d6:93:ec:cd
Signature Algorithm: sha256WithRSAEncryption
Issuer: O=jenkins
Validity
Not Before: Dec 7 14:01:00 2015 GMT
Not After : Nov 21 14:01:00 2018 GMT
Subject: O=jenkins.docker-machine-12cu-acceptatie
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
Public-Key: (2048 bit)
Modulus:
00:a4:3f:9a:1b:d7:cb:c1:03:ee:a2:ed:af:3b:a0:
b3:81:7c:ed:44:bf:a4:e6:46:54:ea:a4:64:a3:1e:
a9:52:f4:81:09:36:07:76:79:28:fb:3c:6f:bb:32:
32:16:57:29:f6:d0:4e:9f:52:0f:b0:4f:c7:82:81:
19:83:37:f3:b7:8a:96:bf:70:e9:4b:e1:17:b5:5a:
38:75:c4:8a:2c:f4:63:03:ab:9a:13:c3:f1:89:6c:
f2:8f:90:55:5e:3d:8c:6a:b7:75:14:7f:75:a4:d5:
70:0d:3a:28:cd:ab:b7:b5:4a:6e:3d:cb:fb:a1:9a:
ee:f2:c3:4f:7d:50:60:e9:06:9c:bf:cb:77:75:ba:
79:97:07:92:0a:02:00:99:f3:56:b0:49:f3:57:9d:
a8:60:9c:b2:d4:e4:68:aa:13:f6:84:50:fd:f5:a7:
8d:53:37:ba:04:2b:1b:25:df:43:a4:7c:30:d5:d5:
93:f1:ca:d7:f8:ee:e0:0a:b2:4c:97:e1:d4:f1:2d:
c0:29:a9:11:55:bd:dc:6f:50:4b:cf:0a:cc:54:0e:
36:57:14:dc:36:2c:0b:40:72:97:0b:40:18:29:62:
18:e2:b0:c2:f8:de:0e:9e:21:c0:d5:b9:c3:38:17:
40:5a:7e:09:31:22:08:f8:27:19:00:61:a5:54:d1:
1c:87
Exponent: 65537 (0x10001)
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature, Key Encipherment, Key Agreement
X509v3 Extended Key Usage:
TLS Web Client Authentication, TLS Web Server Authentication
X509v3 Basic Constraints: critical
CA:FALSE
X509v3 Subject Alternative Name:
DNS:localhost, IP Address:52.28.126.68
Signature Algorithm: sha256WithRSAEncryption
16:4c:5b:4e:54:a8:4b:5a:5e:96:1e:8a:d6:9b:3b:07:dd:b5:
76:4e:6f:4b:71:e2:7c:68:76:d2:5a:6c:de:eb:b3:79:02:cb:
51:8d:f7:e3:f5:37:a4:32:4b:db:f2:3b:14:5b:7d:a0:9b:f2:
18:f7:00:6a:83:1e:40:34:11:ce:9c:40:5a:64:fa:4e:fb:1a:
52:0b:b0:4e:04:39:19:b3:a1:2c:fe:09:c0:7d:71:03:59:17:
74:90:da:4f:ff:40:c8:94:0d:39:b1:0b:26:a3:6c:b7:bb:c7:
c3:fc:c3:9a:86:78:9a:e0:90:df:cc:b9:7e:15:bc:dc:75:55:
de:0d:59:da:17:c7:e8:fa:38:12:e1:9e:a3:f2:05:15:2a:27:
73:f7:6f:84:7d:dd:34:8a:ee:99:b4:3d:5d:67:58:08:fd:70:
5c:0e:48:76:5a:6a:05:6f:45:49:2c:ad:be:d5:b7:1c:6f:18:
c9:2f:ed:83:06:40:a4:56:fc:a6:e9:e5:51:4f:bc:1e:e2:5d:
0f:31:53:8a:f9:95:b9:eb:29:f2:14:01:f9:d3:3f:0b:25:85:
86:1e:aa:d0:60:63:0e:4a:eb:f6:8d:6b:80:c5:0a:17:12:a2:
1f:bf:4c:36:35:19:69:cb:5d:5e:25:15:9d:37:bb:96:2a:b7:
dd:b2:d1:67
Este certificado no funciona:
Certificate:
Data:
Version: 3 (0x2)
Serial Number:
b2:95:dc:b4:b4:6a:94:b9:ab:d3:58:a3:cc:5b:d9:6e
Signature Algorithm: sha256WithRSAEncryption
Issuer: O=tijs
Validity
Not Before: Oct 2 15:07:00 2015 GMT
Not After : Sep 16 15:07:00 2018 GMT
Subject: O=tijs
Subject Public Key Info:
Public Key Algorithm: rsaEncryption
RSA Public Key: (2048 bit)
Modulus (2048 bit):
00:a6:36:a3:dd:66:1e:8d:9c:8e:c0:43:78:ec:58:
25:a0:f9:a5:24:a8:45:1c:c6:b4:16:fa:81:39:20:
b9:79:23:e0:60:6b:f9:1d:af:80:6b:0c:8c:df:30:
50:66:75:06:9b:f1:78:33:83:9e:4b:bd:7a:44:d7:
d5:06:ce:07:af:52:1d:b3:e6:64:b7:a9:6a:61:e6:
25:e9:2a:85:03:89:17:8a:9c:f2:2a:ab:6f:56:ea:
ba:7e:da:03:b2:f1:8b:35:b3:41:35:91:44:b7:17:
bd:d2:41:27:43:22:cd:c0:e6:19:7b:98:48:bb:3a:
c4:2b:54:d9:48:48:18:02:3f:c5:c7:38:19:09:3f:
6a:eb:63:26:0c:83:62:92:99:a9:20:28:0f:70:73:
c5:c7:48:50:61:00:51:c1:48:d9:7d:05:98:02:55:
6a:c0:5b:70:0b:33:f9:78:dd:b8:d4:04:ae:bc:0c:
70:88:85:01:78:d5:15:09:6a:da:22:de:00:a3:38:
ac:2e:76:af:b2:47:50:c3:75:d9:22:6f:dd:05:09:
5e:15:fd:c8:b2:3c:e4:53:a5:e5:c2:ac:36:22:b6:
12:85:3b:33:55:70:25:9b:42:bc:fe:dc:39:aa:17:
18:04:88:aa:c9:e7:3e:09:7f:35:68:51:24:7d:b8:
01:79
Exponent: 65537 (0x10001)
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature
X509v3 Extended Key Usage:
TLS Web Client Authentication
X509v3 Basic Constraints: critical
CA:FALSE
Signature Algorithm: sha256WithRSAEncryption
35:5b:74:a6:99:9a:2f:f7:c3:f0:0f:53:b8:c1:cb:f9:9b:9a:
fa:3b:7b:f3:31:35:0c:c1:da:38:9f:1f:33:b4:b4:5c:68:77:
06:a1:bd:d5:8c:66:8a:7b:23:d0:4d:81:71:b7:13:cb:9e:17:
8d:32:a5:53:50:0c:48:f3:40:96:21:ab:30:7c:49:3c:ee:c3:
c7:3f:29:8f:ac:d4:3b:ce:d5:9d:8f:ad:0e:77:b9:ac:cf:1d:
51:f4:69:db:95:58:3f:98:14:96:73:f0:e5:f0:a8:f1:d8:fa:
39:13:73:f5:9d:3d:65:01:9f:e8:a6:39:7b:87:bb:c5:5a:50:
ec:50:3f:eb:7b:54:83:6f:b8:8e:a0:73:2d:9c:1f:b8:48:6a:
f7:98:97:4e:6e:7b:15:d1:33:10:00:e6:15:af:b3:40:20:d0:
3d:3b:c1:cd:1f:54:31:34:0c:cd:3b:e4:d6:68:d7:dd:8e:2f:
36:11:43:0f:e7:8f:c4:17:07:be:b5:3d:69:46:73:2e:24:c1:
77:fa:05:54:49:f8:13:58:83:3f:a6:13:f8:d7:15:5a:19:a2:
f3:3c:92:1a:00:de:86:c5:fb:6a:15:5c:98:30:77:64:d5:62:
39:32:43:68:67:26:f4:90:f0:67:81:98:d6:94:71:af:75:32:
1b:1b:4e:bf
Tenga en cuenta las siguientes secciones:
trabajando:
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature
X509v3 Extended Key Usage:
TLS Web Client Authentication
X509v3 Basic Constraints: critical
CA:FALSE
no funciona:
X509v3 extensions:
X509v3 Key Usage: critical
Digital Signature, Key Encipherment, Key Agreement
X509v3 Extended Key Usage:
TLS Web Client Authentication, TLS Web Server Authentication
X509v3 Basic Constraints: critical
CA:FALSE
X509v3 Subject Alternative Name:
DNS:localhost, IP Address:52.28.126.68
Parece que el segundo certificado se emite a una dirección IP específica. ¿Ha cambiado algo en el código de generación del certificado recientemente?
tijszwinkels
en 7 dic. 2015
Mi error parece ser diferente. En algunos casos, mis certificados no existen en absoluto en los nodos Swarm.
Mis pasos para reproducir (capturas de pantalla adjuntas):
- Cree una instancia de AWS llamada 'docker-machine' para ejecutar script.sh
- script.sh crea el clúster de enjambre de AWS
Me pregunto si hay algo obvio que me falta.
Abajo: no hay directorio .docker para certificados para el usuario 'root'
Abajo: no hay directorio .docker para certificados para el usuario 'ubuntu'
tdensmore
en 7 dic. 2015
@tdensmore Los $HOME/.docker en las instancias creadas. Terminan en /etc/docker . ¿Qué síntomas estás viendo?
nathanleclaire
en 8 dic. 2015
Gracias @nathanleclaire . Verificaré / etc / docker la próxima vez que ejecute mi pila. Los síntomas que estoy viendo (lo siento, pensé que había subido ese PNG en mi comentario original) son que docker-machine queja de que los certificados no son válidos después de crear el clúster de enjambre.
Vea mi imagen a continuación.
tdensmore
en 8 dic. 2015
[Perdón por la publicación duplicada.] No estoy seguro de si se trata del mismo problema, pero puedo reproducirlo de manera confiable ejecutando lo siguiente:
$ docker-machine restart default && docker-machine env default
(default) OUT | Starting VM...
Restarted machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.100:2376": dial tcp 192.168.99.100:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
Sin embargo, si ejecuto los dos comandos _ por separado_, funciona bien:
$ docker-machine restart default
(default) OUT | Starting VM...
Restarted machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
$ docker-machine env default
(no error)
El error también ocurre si coloca las siguientes dos líneas en un archivo foo.sh :
docker-machine restart default
docker-machine env default
Y correr:
$ source foo.sh
cjerdonek
en 10 dic. 2015
@nathanleclaire Estoy experimentando exactamente el mismo problema que @tijszwinkels. Detener y reiniciar una máquina con el controlador de AWS desencadena este problema. También la misma versión de máquina.
robvelor
en 10 dic. 2015
El mismo problema aquí después de probar docker-py .
Reproduciendo constantemente como:
INICIO DE BUCLE
→ dm ls
NAME ACTIVE DRIVER STATE URL SWARM
ddev * virtualbox Running tcp://192.168.99.101:2376
→ dm restart ddev
(ddev) OUT | Starting VM...
Restarted machines may have new IP addresses. You may need to re-run the `docker-machine env` command.
→ docker start manage
manage
from docker.client import Client
from docker.utils import kwargs_from_env
kwargs = kwargs_from_env()
kwargs['tls'].assert_hostname = False
api = Client(**kwargs)
#: Exactly after I try to start an already created exec_create session
#: using the same (empty) generator object, api becomes unavailable
create = api.exec_create('manage', 'bash -c "ansible -c local -i localhost, all -m setup"')
start = api.exec_start(create['Id'], stream=True)
print [line for line in start]
start = api.exec_start(create['Id'], stream=True)
print [line for line in start]
create = api.exec_create('manage', 'bash -c "ansible -c local -i localhost, all -m setup"')
*** ConnectionError: HTTPSConnectionPool(host='192.168.99.101', port=2376): Max retries exceeded with url: /v1.21/containers/manage/exec (Caused by NewConnectionError('<requests.packages.urllib3.connection.VerifiedHTTPSConnection object at 0x10fdba9d0>: Failed to establish a new connection: [Errno 61] Connection refused',))
FIN DE LAZO
→ docker-machine --debug env ddev
Docker Machine Version: 0.5.1 (HEAD)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:54243
() Calling RPCServerDriver.GetVersion
Using API Version 1
() Calling RPCServerDriver.SetConfigRaw
() Calling RPCServerDriver.GetMachineName
(ddev) Calling RPCServerDriver.GetState
(ddev) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo ddev --machinereadable
(ddev) DBG | STDOUT:
(ddev) DBG | {
(ddev) DBG | name="ddev"
(ddev) DBG | groups="/"
(ddev) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(ddev) DBG | UUID="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | CfgFile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.vbox"
(ddev) DBG | SnapFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Snapshots"
(ddev) DBG | LogFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Logs"
(ddev) DBG | hardwareuuid="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | memory=1024
(ddev) DBG | pagefusion="off"
(ddev) DBG | vram=8
(ddev) DBG | cpuexecutioncap=100
(ddev) DBG | hpet="on"
(ddev) DBG | chipset="piix3"
(ddev) DBG | firmware="BIOS"
(ddev) Calling RPCServerDriver.GetURL
(ddev) DBG | cpus=1
(ddev) DBG | pae="on"
(ddev) DBG | longmode="on"
(ddev) DBG | cpuid-portability-level=0
(ddev) DBG | bootmenu="disabled"
(ddev) DBG | boot1="dvd"
(ddev) DBG | boot2="dvd"
(ddev) DBG | boot3="disk"
(ddev) DBG | boot4="none"
(ddev) DBG | acpi="on"
(ddev) DBG | ioapic="on"
(ddev) DBG | biossystemtimeoffset=0
(ddev) DBG | rtcuseutc="on"
(ddev) DBG | hwvirtex="on"
(ddev) DBG | nestedpaging="on"
(ddev) DBG | largepages="on"
(ddev) DBG | vtxvpid="on"
(ddev) DBG | vtxux="on"
(ddev) DBG | paravirtprovider="default"
(ddev) DBG | VMState="running"
(ddev) DBG | VMStateChangeTime="2015-12-11T10:12:04.963000000"
(ddev) DBG | monitorcount=1
(ddev) DBG | accelerate3d="off"
(ddev) DBG | accelerate2dvideo="off"
(ddev) DBG | teleporterenabled="off"
(ddev) DBG | teleporterport=0
(ddev) DBG | teleporteraddress=""
(ddev) DBG | teleporterpassword=""
(ddev) DBG | tracing-enabled="off"
(ddev) DBG | tracing-allow-vm-access="off"
(ddev) DBG | tracing-config=""
(ddev) DBG | autostart-enabled="off"
(ddev) DBG | autostart-delay=0
(ddev) DBG | defaultfrontend=""
(ddev) DBG | storagecontrollername0="SATA"
(ddev) DBG | storagecontrollertype0="IntelAhci"
(ddev) DBG | storagecontrollerinstance0="0"
(ddev) DBG | storagecontrollermaxportcount0="30"
(ddev) DBG | storagecontrollerportcount0="30"
(ddev) DBG | storagecontrollerbootable0="on"
(ddev) DBG | "SATA-0-0"="/Users/rubot/.docker/machine/machines/ddev/boot2docker.iso"
(ddev) DBG | "SATA-ImageUUID-0-0"="68bbc276-9b64-4ea5-a67d-29f2f065bf6f"
(ddev) DBG | "SATA-tempeject"="off"
(ddev) DBG | "SATA-IsEjected"="off"
(ddev) DBG | "SATA-1-0"="/Users/rubot/.docker/machine/machines/ddev/disk.vmdk"
(ddev) DBG | "SATA-ImageUUID-1-0"="b75e1c05-f592-4575-b287-3223b9dfa361"
(ddev) DBG | "SATA-2-0"="none"
(ddev) DBG | "SATA-3-0"="none"
(ddev) DBG | "SATA-4-0"="none"
(ddev) DBG | "SATA-5-0"="none"
(ddev) DBG | "SATA-6-0"="none"
(ddev) DBG | "SATA-7-0"="none"
(ddev) DBG | "SATA-8-0"="none"
(ddev) DBG | "SATA-9-0"="none"
(ddev) DBG | "SATA-10-0"="none"
(ddev) DBG | "SATA-11-0"="none"
(ddev) DBG | "SATA-12-0"="none"
(ddev) DBG | "SATA-13-0"="none"
(ddev) DBG | "SATA-14-0"="none"
(ddev) DBG | "SATA-15-0"="none"
(ddev) DBG | "SATA-16-0"="none"
(ddev) DBG | "SATA-17-0"="none"
(ddev) DBG | "SATA-18-0"="none"
(ddev) DBG | "SATA-19-0"="none"
(ddev) DBG | "SATA-20-0"="none"
(ddev) DBG | "SATA-21-0"="none"
(ddev) DBG | "SATA-22-0"="none"
(ddev) DBG | "SATA-23-0"="none"
(ddev) DBG | "SATA-24-0"="none"
(ddev) DBG | "SATA-25-0"="none"
(ddev) DBG | "SATA-26-0"="none"
(ddev) DBG | "SATA-27-0"="none"
(ddev) DBG | "SATA-28-0"="none"
(ddev) DBG | "SATA-29-0"="none"
(ddev) DBG | natnet1="nat"
(ddev) DBG | macaddress1="080027A42B25"
(ddev) DBG | cableconnected1="on"
(ddev) DBG | nic1="nat"
(ddev) DBG | nictype1="82540EM"
(ddev) DBG | nicspeed1="0"
(ddev) DBG | mtu="0"
(ddev) DBG | sockSnd="64"
(ddev) DBG | sockRcv="64"
(ddev) DBG | tcpWndSnd="64"
(ddev) DBG | tcpWndRcv="64"
(ddev) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,53497,,22"
(ddev) DBG | hostonlyadapter2="vboxnet0"
(ddev) DBG | macaddress2="08002757C1AF"
(ddev) DBG | cableconnected2="on"
(ddev) DBG | nic2="hostonly"
(ddev) DBG | nictype2="82540EM"
(ddev) DBG | nicspeed2="0"
(ddev) DBG | nic3="none"
(ddev) DBG | nic4="none"
(ddev) DBG | nic5="none"
(ddev) DBG | nic6="none"
(ddev) DBG | nic7="none"
(ddev) DBG | nic8="none"
(ddev) DBG | hidpointing="ps2mouse"
(ddev) DBG | hidkeyboard="ps2kbd"
(ddev) DBG | uart1="off"
(ddev) DBG | uart2="off"
(ddev) DBG | lpt1="off"
(ddev) DBG | lpt2="off"
(ddev) DBG | audio="none"
(ddev) DBG | clipboard="disabled"
(ddev) DBG | draganddrop="disabled"
(ddev) DBG | SessionName="headless"
(ddev) DBG | VideoMode="720,400,0"<strong i="14">@0</strong>,0 1
(ddev) DBG | vrde="off"
(ddev) DBG | usb="off"
(ddev) DBG | ehci="off"
(ddev) DBG | xhci="off"
(ddev) DBG | SharedFolderNameMachineMapping1="Users"
(ddev) DBG | SharedFolderPathMachineMapping1="/Users"
(ddev) DBG | VRDEActiveConnection="off"
(ddev) DBG | VRDEClients=0
(ddev) DBG | vcpenabled="off"
(ddev) DBG | vcpscreens=0
(ddev) DBG | vcpfile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.webm"
(ddev) DBG | vcpwidth=1024
(ddev) DBG | vcpheight=768
(ddev) DBG | vcprate=512
(ddev) DBG | vcpfps=25
(ddev) DBG | GuestMemoryBalloon=0
(ddev) DBG | GuestOSType="Linux26_64"
(ddev) DBG | GuestAdditionsRunLevel=2
(ddev) DBG | GuestAdditionsVersion="5.0.8 r103449"
(ddev) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449828743931
(ddev) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449828751900
(ddev) DBG | GuestAdditionsFacility_Seamless Mode=0,1449828743931
(ddev) DBG | GuestAdditionsFacility_Graphics Mode=0,1449828743931
(ddev) DBG | }
(ddev) DBG | STDERR:
(ddev) DBG | {
(ddev) DBG | }
(ddev) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo ddev --machinereadable
(ddev) DBG | STDOUT:
(ddev) DBG | {
(ddev) DBG | name="ddev"
(ddev) DBG | groups="/"
(ddev) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(ddev) DBG | UUID="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | CfgFile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.vbox"
(ddev) DBG | SnapFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Snapshots"
(ddev) DBG | LogFldr="/Users/rubot/.docker/machine/machines/ddev/ddev/Logs"
(ddev) DBG | hardwareuuid="3123fda1-455a-453e-aad0-19fff84d1e30"
(ddev) DBG | memory=1024
(ddev) DBG | pagefusion="off"
(ddev) DBG | vram=8
(ddev) DBG | cpuexecutioncap=100
(ddev) DBG | hpet="on"
(ddev) DBG | chipset="piix3"
(ddev) DBG | firmware="BIOS"
(ddev) DBG | cpus=1
(ddev) DBG | pae="on"
(ddev) DBG | longmode="on"
(ddev) DBG | cpuid-portability-level=0
(ddev) DBG | bootmenu="disabled"
(ddev) DBG | boot1="dvd"
(ddev) DBG | boot2="dvd"
(ddev) DBG | boot3="disk"
(ddev) DBG | boot4="none"
(ddev) DBG | acpi="on"
(ddev) DBG | ioapic="on"
(ddev) DBG | biossystemtimeoffset=0
(ddev) DBG | rtcuseutc="on"
(ddev) DBG | hwvirtex="on"
(ddev) DBG | nestedpaging="on"
(ddev) DBG | largepages="on"
(ddev) DBG | vtxvpid="on"
(ddev) DBG | vtxux="on"
(ddev) DBG | paravirtprovider="default"
(ddev) DBG | VMState="running"
(ddev) DBG | VMStateChangeTime="2015-12-11T10:12:04.963000000"
(ddev) DBG | monitorcount=1
(ddev) DBG | accelerate3d="off"
(ddev) DBG | accelerate2dvideo="off"
(ddev) DBG | teleporterenabled="off"
(ddev) DBG | teleporterport=0
(ddev) DBG | teleporteraddress=""
(ddev) DBG | teleporterpassword=""
(ddev) DBG | tracing-enabled="off"
(ddev) DBG | tracing-allow-vm-access="off"
(ddev) DBG | tracing-config=""
(ddev) DBG | autostart-enabled="off"
(ddev) DBG | autostart-delay=0
(ddev) DBG | defaultfrontend=""
(ddev) DBG | storagecontrollername0="SATA"
(ddev) DBG | storagecontrollertype0="IntelAhci"
(ddev) DBG | storagecontrollerinstance0="0"
(ddev) DBG | storagecontrollermaxportcount0="30"
(ddev) DBG | storagecontrollerportcount0="30"
(ddev) DBG | storagecontrollerbootable0="on"
(ddev) DBG | "SATA-0-0"="/Users/rubot/.docker/machine/machines/ddev/boot2docker.iso"
(ddev) DBG | "SATA-ImageUUID-0-0"="68bbc276-9b64-4ea5-a67d-29f2f065bf6f"
(ddev) DBG | "SATA-tempeject"="off"
(ddev) DBG | "SATA-IsEjected"="off"
(ddev) DBG | "SATA-1-0"="/Users/rubot/.docker/machine/machines/ddev/disk.vmdk"
(ddev) DBG | "SATA-ImageUUID-1-0"="b75e1c05-f592-4575-b287-3223b9dfa361"
(ddev) DBG | "SATA-2-0"="none"
(ddev) DBG | "SATA-3-0"="none"
(ddev) DBG | "SATA-4-0"="none"
(ddev) DBG | "SATA-5-0"="none"
(ddev) DBG | "SATA-6-0"="none"
(ddev) DBG | "SATA-7-0"="none"
(ddev) DBG | "SATA-8-0"="none"
(ddev) DBG | "SATA-9-0"="none"
(ddev) DBG | "SATA-10-0"="none"
(ddev) DBG | "SATA-11-0"="none"
(ddev) DBG | "SATA-12-0"="none"
(ddev) DBG | "SATA-13-0"="none"
(ddev) DBG | "SATA-14-0"="none"
(ddev) DBG | "SATA-15-0"="none"
(ddev) DBG | "SATA-16-0"="none"
(ddev) DBG | "SATA-17-0"="none"
(ddev) DBG | "SATA-18-0"="none"
(ddev) DBG | "SATA-19-0"="none"
(ddev) DBG | "SATA-20-0"="none"
(ddev) DBG | "SATA-21-0"="none"
(ddev) DBG | "SATA-22-0"="none"
(ddev) DBG | "SATA-23-0"="none"
(ddev) DBG | "SATA-24-0"="none"
(ddev) DBG | "SATA-25-0"="none"
(ddev) DBG | "SATA-26-0"="none"
(ddev) DBG | "SATA-27-0"="none"
(ddev) DBG | "SATA-28-0"="none"
(ddev) DBG | "SATA-29-0"="none"
(ddev) DBG | natnet1="nat"
(ddev) DBG | macaddress1="080027A42B25"
(ddev) DBG | cableconnected1="on"
(ddev) DBG | nic1="nat"
(ddev) DBG | nictype1="82540EM"
(ddev) DBG | nicspeed1="0"
(ddev) DBG | mtu="0"
(ddev) DBG | sockSnd="64"
(ddev) DBG | sockRcv="64"
(ddev) DBG | tcpWndSnd="64"
(ddev) DBG | tcpWndRcv="64"
(ddev) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,53497,,22"
(ddev) DBG | hostonlyadapter2="vboxnet0"
(ddev) DBG | macaddress2="08002757C1AF"
(ddev) DBG | cableconnected2="on"
(ddev) DBG | nic2="hostonly"
(ddev) DBG | nictype2="82540EM"
(ddev) DBG | nicspeed2="0"
(ddev) DBG | nic3="none"
(ddev) DBG | nic4="none"
(ddev) DBG | nic5="none"
(ddev) DBG | nic6="none"
(ddev) DBG | nic7="none"
(ddev) DBG | nic8="none"
(ddev) DBG | hidpointing="ps2mouse"
(ddev) DBG | hidkeyboard="ps2kbd"
(ddev) DBG | uart1="off"
(ddev) DBG | uart2="off"
(ddev) DBG | lpt1="off"
(ddev) DBG | lpt2="off"
(ddev) DBG | audio="none"
(ddev) DBG | clipboard="disabled"
(ddev) DBG | draganddrop="disabled"
(ddev) DBG | SessionName="headless"
(ddev) DBG | VideoMode="720,400,0"<strong i="15">@0</strong>,0 1
(ddev) DBG | vrde="off"
(ddev) DBG | usb="off"
(ddev) DBG | ehci="off"
(ddev) DBG | xhci="off"
(ddev) DBG | SharedFolderNameMachineMapping1="Users"
(ddev) DBG | SharedFolderPathMachineMapping1="/Users"
(ddev) DBG | VRDEActiveConnection="off"
(ddev) DBG | VRDEClients=0
(ddev) DBG | vcpenabled="off"
(ddev) DBG | vcpscreens=0
(ddev) DBG | vcpfile="/Users/rubot/.docker/machine/machines/ddev/ddev/ddev.webm"
(ddev) DBG | vcpwidth=1024
(ddev) DBG | vcpheight=768
(ddev) DBG | vcprate=512
(ddev) DBG | vcpfps=25
(ddev) DBG | GuestMemoryBalloon=0
(ddev) DBG | GuestOSType="Linux26_64"
(ddev) DBG | GuestAdditionsRunLevel=2
(ddev) DBG | GuestAdditionsVersion="5.0.8 r103449"
(ddev) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449828743931
(ddev) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449828751900
(ddev) DBG | GuestAdditionsFacility_Seamless Mode=0,1449828743931
(ddev) DBG | GuestAdditionsFacility_Graphics Mode=0,1449828743931
(ddev) DBG | }
(ddev) DBG | STDERR:
(ddev) DBG | {
(ddev) DBG | }
(ddev) DBG | Using SSH client type: external
(ddev) DBG | About to run SSH command:
(ddev) DBG | ip addr show dev eth1
(ddev) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(ddev) DBG | link/ether 08:00:27:57:c1:af brd ff:ff:ff:ff:ff:ff
(ddev) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG | inet6 fe80::a00:27ff:fe57:c1af/64 scope link
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG |
(ddev) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(ddev) DBG | link/ether 08:00:27:57:c1:af brd ff:ff:ff:ff:ff:ff
(ddev) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG | inet6 fe80::a00:27ff:fe57:c1af/64 scope link
Reading CA certificate from /Users/rubot/.docker/machine/certs/ca.pem
(ddev) DBG | valid_lft forever preferred_lft forever
(ddev) DBG |
(ddev) DBG | END SSH
(ddev) DBG |
Reading server certificate from /Users/rubot/.docker/machine/machines/ddev/server.pem
Reading server key from /Users/rubot/.docker/machine/machines/ddev/server-key.pem
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.101:2376": dial tcp 192.168.99.101:2376: getsockopt: connection refused
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
→ docker-machine --debug regenerate-certs -f ddev
Docker Machine Version: 0.5.1 (HEAD)
Regenerating TLS certificates
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:54253
() Calling RPCServerDriver.GetVersion
Using API Version 1
() Calling RPCServerDriver.SetConfigRaw
() Calling RPCServerDriver.GetMachineName
command=configureAuth machine=ddev
Detecting the provisioner...
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
cat /etc/os-release
SSH cmd err, output: <nil>: NAME=Boot2Docker
VERSION=1.9.0
ID=boot2docker
ID_LIKE=tcl
VERSION_ID=1.9.0
PRETTY_NAME="Boot2Docker 1.9.0 (TCL 6.4); master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015"
ANSI_COLOR="1;34"
HOME_URL="http://boot2docker.io"
SUPPORT_URL="https://github.com/boot2docker/boot2docker"
BUG_REPORT_URL="https://github.com/boot2docker/boot2docker/issues"
found compatible host: boot2docker
(ddev) Calling RPCServerDriver.GetMachineName
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /usr/bin/sethostname ddev && echo "ddev" | sudo tee /var/lib/boot2docker/etc/hostname
SSH cmd err, output: <nil>: Setting hostname to ddev Done.
ddev
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:54257 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23091
unix 3 [ ] STREAM CONNECTED 23090
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:54258 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23144
unix 3 [ ] STREAM CONNECTED 23143
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 36 0 10.0.2.15:ssh 10.0.2.2:54259 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23199
unix 3 [ ] STREAM CONNECTED 23198
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 36 0 10.0.2.15:ssh 10.0.2.2:54260 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23259
unix 3 [ ] STREAM CONNECTED 23258
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
(ddev) Calling RPCServerDriver.GetSSHHostname
(ddev) Calling RPCServerDriver.GetSSHPort
(ddev) Calling RPCServerDriver.GetSSHKeyPath
(ddev) Calling RPCServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:54261 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 17009 /var/run/acpid.socket
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 3 [ ] STREAM CONNECTED 23312
unix 3 [ ] STREAM CONNECTED 23311
unix 3 [ ] DGRAM 14296
unix 3 [ ] DGRAM 14295
Unable to verify the Docker daemon is listening: Maximum number of retries (5) exceeded
rubot
en 11 dic. 2015
@nathanleclaire Veo que esto se eliminó del hito 0.5.2. ¿Hay un nuevo hito en mente?
tdensmore
en 11 dic. 2015
Lo vi de nuevo: aquí está la depuración que solicitó @nathanleclaire
- un env que falla
- un regenerate-certs
- un env que tiene éxito
todo con --debug
$ docker-machine --debug env force12
Docker Machine Version: 0.5.0 (04cfa58)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:50951
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetState
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) Calling RpcServerDriver.GetURL
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="12">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="13">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
Reading CA certificate from /Users/liz/.docker/machine/certs/ca.pem
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
Reading server certificate from /Users/liz/.docker/machine/machines/force12/server.pem
Reading server key from /Users/liz/.docker/machine/machines/force12/server-key.pem
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "192.168.99.101:2376": x509: certificate is valid for 192.168.99.100, not 192.168.99.101
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
$ docker-machine --debug regenerate-certs force12
Docker Machine Version: 0.5.0 (04cfa58)
Regenerate TLS machine certs? Warning: this is irreversible. (y/n): y
Regenerating TLS certificates
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:51158
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
command=configureAuth machine=force12
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
cat /etc/os-release
SSH cmd err, output: <nil>: NAME=Boot2Docker
VERSION=1.9.0
ID=boot2docker
ID_LIKE=tcl
VERSION_ID=1.9.0
PRETTY_NAME="Boot2Docker 1.9.0 (TCL 6.4); master : 16e4a2a - Tue Nov 3 19:49:22 UTC 2015"
ANSI_COLOR="1;34"
HOME_URL="http://boot2docker.io"
SUPPORT_URL="https://github.com/boot2docker/boot2docker"
BUG_REPORT_URL="https://github.com/boot2docker/boot2docker/issues"
found compatible host: boot2docker
(force12) Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /usr/bin/sethostname force12 && echo "force12" | sudo tee /var/lib/boot2docker/etc/hostname
SSH cmd err, output: <nil>: Setting hostname to force12 Done.
force12
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:51162 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 2 [ ACC ] STREAM LISTENING 16868 /var/run/docker.sock
unix 2 [ ACC ] STREAM LISTENING 16626 /var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 17196 /var/lib/docker/network/files/05df9531506ff5bae20f65cc213e979e52c91a1f060e3919b6a4e1d03eafe060.sock
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 17998
unix 3 [ ] DGRAM 14296
unix 3 [ ] STREAM CONNECTED 17999
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo mkdir -p /var/lib/boot2docker
SSH cmd err, output: <nil>:
(force12) Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetIP
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="5">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
Copying certs to the local machine directory...
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
generating server cert: /Users/liz/.docker/machine/machines/force12/server.pem ca-key=/Users/liz/.docker/machine/certs/ca.pem private-key=/Users/liz/.docker/machine/certs/ca-key.pem org=liz.force12
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker stop
SSH cmd err, output: <nil>:
Copying certs to the remote machine...
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----
MIICxTCCAa+gAwIBAgIQG+7IaWezmEtyKdTY0XwKTzALBgkqhkiG9w0BAQswDjEM
MAoGA1UEChMDbGl6MB4XDTE1MDkyNDE4MDIwMFoXDTE4MDkwODE4MDIwMFowDjEM
MAoGA1UEChMDbGl6MIIBIjANBgkqhkiG9w0BAQEFAAOCAQ8AMIIBCgKCAQEAu3sM
lzFTb6qOsovgwFz/GEIN/lC1h8i9MIUt5LWF17MBp23aT15HTXy5GTuhfnXh3kPS
KKn5XzWvXQ9JILDIemIy8r/cO1ceGP1HYOtFtyuaJqle34UcFvIe9uH9KXB/Kh+a
fvQbXFuj67LODcUMD76pQd7YvB/D+G56gTFhrmOQQRCGHgj2ySgLcEr0TgtTbBiy
GyZl5N9uBPvwQNVXVKYQdK12VJSFIjY8zx/2Z7hmp6jCEcFcHtmHbw/hT/ReTTmR
ZQaXZrbAqWOdMbeNBbNIcnWNmdv/BED0l0K6d7x017f066BxrUA1HIq1rXClqeym
iKFg0gfQGyG3bYZb2QIDAQABoyMwITAOBgNVHQ8BAf8EBAMCAKwwDwYDVR0TAQH/
BAUwAwEB/zALBgkqhkiG9w0BAQsDggEBAF65b1uUdG4nj49N5rtVy+2me6fJos7N
VlhbfXBjO6lmsoaDDP7qndmUnYVWUCgdLaXZj+NlVxAT9n8LVVOBtik9lda0VGxU
R2iwZHCOWky+3BCs2zrTP2pJlO95jlQ31/wz6qbBNAIxHC8bCH15gWAEB202l+Hs
EDbvoGlGHiC3PY4q6EBJTuo/hT31P0WPz8+CPivkm184tYwG4zbPTh6auTZz5FAw
amfFvAvV+JZ+2V0ftJdjZbqCxOSccU/BSZOl34TKvjgtDgRZv7ZH7QoCMrK/INWH
tSC3vZZOW++swflG6ZNiRlOKAt0Mtqbfbqup2Fo4KnGi7byCcXm8c/M=
-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/ca.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
' | sudo tee /var/lib/boot2docker/server.pem
SSH cmd err, output: <nil>: -----BEGIN CERTIFICATE-----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-----END CERTIFICATE-----
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf '%s' '-----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
' | sudo tee /var/lib/boot2docker/server-key.pem
SSH cmd err, output: <nil>: -----BEGIN RSA PRIVATE KEY-----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-----END RSA PRIVATE KEY-----
(force12) Calling RpcServerDriver.GetURL
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="6">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
(force12) Calling RpcServerDriver.DriverName
Setting Docker configuration on the remote daemon...
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
printf %s "
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
" | sudo tee /var/lib/boot2docker/profile
SSH cmd err, output: <nil>:
EXTRA_ARGS='
--label provider=virtualbox
'
CACERT=/var/lib/boot2docker/ca.pem
DOCKER_HOST='-H tcp://0.0.0.0:2376'
DOCKER_STORAGE=aufs
DOCKER_TLS=auto
SERVERKEY=/var/lib/boot2docker/server-key.pem
SERVERCERT=/var/lib/boot2docker/server.pem
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
sudo /etc/init.d/docker start
SSH cmd err, output: <nil>: Need TLS certs for force12,127.0.0.1,10.0.2.15,192.168.99.101
-------------------
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 0 0 10.0.2.15:ssh 10.0.2.2:51173 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 2 [ ACC ] STREAM LISTENING 16626 /var/run/acpid.socket
unix 3 [ ] STREAM CONNECTED 18575
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 18576
unix 3 [ ] DGRAM 14296
(force12) Calling RpcServerDriver.GetSSHHostname
(force12) Calling RpcServerDriver.GetSSHPort
(force12) Calling RpcServerDriver.GetSSHKeyPath
(force12) Calling RpcServerDriver.GetSSHUsername
Using SSH client type: external
About to run SSH command:
netstat -a
SSH cmd err, output: <nil>: Active Internet connections (servers and established)
Proto Recv-Q Send-Q Local Address Foreign Address State
tcp 0 0 0.0.0.0:ssh 0.0.0.0:* LISTEN
tcp 36 0 10.0.2.15:ssh 10.0.2.2:51175 ESTABLISHED
tcp 0 0 :::ssh :::* LISTEN
tcp 0 0 :::2376 :::* LISTEN
Active UNIX domain sockets (servers and established)
Proto RefCnt Flags Type State I-Node Path
unix 2 [ ACC ] STREAM LISTENING 18602 /var/run/docker.sock
unix 2 [ ACC ] SEQPACKET LISTENING 14286 /run/udev/control
unix 2 [ ACC ] STREAM LISTENING 16626 /var/run/acpid.socket
unix 2 [ ACC ] STREAM LISTENING 18669 /var/lib/docker/network/files/ce0ed0d3d061d44db990ff28d601c4adf759830a98e014c54a4d7d2cb17ace20.sock
unix 3 [ ] STREAM CONNECTED 18784
unix 3 [ ] DGRAM 14295
unix 3 [ ] STREAM CONNECTED 18785
unix 3 [ ] DGRAM 14296
(force12) Calling RpcServerDriver.GetIP
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="7">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
(force12) Calling RpcServerDriver.GetConfigRaw
(force12) Calling RpcServerDriver.GetConfigRaw
$ docker-machine --debug env force12
Docker Machine Version: 0.5.0 (04cfa58)
Found binary path at /usr/local/bin/docker-machine-driver-virtualbox
Launching plugin server for driver virtualbox
Plugin server listening at address 127.0.0.1:51295
() Calling RpcServerDriver.GetVersion
Using API Version 1
() Calling RpcServerDriver.SetConfigRaw
() Calling RpcServerDriver.GetMachineName
(force12) Calling RpcServerDriver.GetState
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) Calling RpcServerDriver.GetURL
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="5">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | COMMAND: /usr/local/bin/VBoxManage showvminfo force12 --machinereadable
(force12) DBG | STDOUT:
(force12) DBG | {
(force12) DBG | name="force12"
(force12) DBG | groups="/"
(force12) DBG | ostype="Linux 2.6 / 3.x / 4.x (64-bit)"
(force12) DBG | UUID="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | CfgFile="/Users/liz/.docker/machine/machines/force12/force12/force12.vbox"
(force12) DBG | SnapFldr="/Users/liz/.docker/machine/machines/force12/force12/Snapshots"
(force12) DBG | LogFldr="/Users/liz/.docker/machine/machines/force12/force12/Logs"
(force12) DBG | hardwareuuid="350b1e64-2634-4dd6-91eb-90ba4f32bab1"
(force12) DBG | memory=1024
(force12) DBG | pagefusion="off"
(force12) DBG | vram=8
(force12) DBG | cpuexecutioncap=100
(force12) DBG | hpet="on"
(force12) DBG | chipset="piix3"
(force12) DBG | firmware="BIOS"
(force12) DBG | cpus=1
(force12) DBG | pae="on"
(force12) DBG | longmode="on"
(force12) DBG | cpuid-portability-level=0
(force12) DBG | bootmenu="disabled"
(force12) DBG | boot1="dvd"
(force12) DBG | boot2="dvd"
(force12) DBG | boot3="disk"
(force12) DBG | boot4="none"
(force12) DBG | acpi="on"
(force12) DBG | ioapic="on"
(force12) DBG | biossystemtimeoffset=0
(force12) DBG | rtcuseutc="on"
(force12) DBG | hwvirtex="on"
(force12) DBG | nestedpaging="on"
(force12) DBG | largepages="on"
(force12) DBG | vtxvpid="on"
(force12) DBG | vtxux="on"
(force12) DBG | paravirtprovider="default"
(force12) DBG | VMState="running"
(force12) DBG | VMStateChangeTime="2015-12-11T19:07:09.590000000"
(force12) DBG | monitorcount=1
(force12) DBG | accelerate3d="off"
(force12) DBG | accelerate2dvideo="off"
(force12) DBG | teleporterenabled="off"
(force12) DBG | teleporterport=0
(force12) DBG | teleporteraddress=""
(force12) DBG | teleporterpassword=""
(force12) DBG | tracing-enabled="off"
(force12) DBG | tracing-allow-vm-access="off"
(force12) DBG | tracing-config=""
(force12) DBG | autostart-enabled="off"
(force12) DBG | autostart-delay=0
(force12) DBG | defaultfrontend=""
(force12) DBG | storagecontrollername0="SATA"
(force12) DBG | storagecontrollertype0="IntelAhci"
(force12) DBG | storagecontrollerinstance0="0"
(force12) DBG | storagecontrollermaxportcount0="30"
(force12) DBG | storagecontrollerportcount0="30"
(force12) DBG | storagecontrollerbootable0="on"
(force12) DBG | "SATA-0-0"="/Users/liz/.docker/machine/machines/force12/boot2docker.iso"
(force12) DBG | "SATA-ImageUUID-0-0"="6b4904ab-34d7-45a7-a75d-694e0f9d458a"
(force12) DBG | "SATA-tempeject"="off"
(force12) DBG | "SATA-IsEjected"="off"
(force12) DBG | "SATA-1-0"="/Users/liz/.docker/machine/machines/force12/disk.vmdk"
(force12) DBG | "SATA-ImageUUID-1-0"="4d4c2b54-9587-47b9-8174-f4c0db765711"
(force12) DBG | "SATA-2-0"="none"
(force12) DBG | "SATA-3-0"="none"
(force12) DBG | "SATA-4-0"="none"
(force12) DBG | "SATA-5-0"="none"
(force12) DBG | "SATA-6-0"="none"
(force12) DBG | "SATA-7-0"="none"
(force12) DBG | "SATA-8-0"="none"
(force12) DBG | "SATA-9-0"="none"
(force12) DBG | "SATA-10-0"="none"
(force12) DBG | "SATA-11-0"="none"
(force12) DBG | "SATA-12-0"="none"
(force12) DBG | "SATA-13-0"="none"
(force12) DBG | "SATA-14-0"="none"
(force12) DBG | "SATA-15-0"="none"
(force12) DBG | "SATA-16-0"="none"
(force12) DBG | "SATA-17-0"="none"
(force12) DBG | "SATA-18-0"="none"
(force12) DBG | "SATA-19-0"="none"
(force12) DBG | "SATA-20-0"="none"
(force12) DBG | "SATA-21-0"="none"
(force12) DBG | "SATA-22-0"="none"
(force12) DBG | "SATA-23-0"="none"
(force12) DBG | "SATA-24-0"="none"
(force12) DBG | "SATA-25-0"="none"
(force12) DBG | "SATA-26-0"="none"
(force12) DBG | "SATA-27-0"="none"
(force12) DBG | "SATA-28-0"="none"
(force12) DBG | "SATA-29-0"="none"
(force12) DBG | natnet1="nat"
(force12) DBG | macaddress1="0800275B3EAE"
(force12) DBG | cableconnected1="on"
(force12) DBG | nic1="nat"
(force12) DBG | nictype1="82540EM"
(force12) DBG | nicspeed1="0"
(force12) DBG | mtu="0"
(force12) DBG | sockSnd="64"
(force12) DBG | sockRcv="64"
(force12) DBG | tcpWndSnd="64"
(force12) DBG | tcpWndRcv="64"
(force12) DBG | Forwarding(0)="ssh,tcp,127.0.0.1,55846,,22"
(force12) DBG | hostonlyadapter2="vboxnet0"
(force12) DBG | macaddress2="080027C094E9"
(force12) DBG | cableconnected2="on"
(force12) DBG | nic2="hostonly"
(force12) DBG | nictype2="82540EM"
(force12) DBG | nicspeed2="0"
(force12) DBG | nic3="none"
(force12) DBG | nic4="none"
(force12) DBG | nic5="none"
(force12) DBG | nic6="none"
(force12) DBG | nic7="none"
(force12) DBG | nic8="none"
(force12) DBG | hidpointing="ps2mouse"
(force12) DBG | hidkeyboard="ps2kbd"
(force12) DBG | uart1="off"
(force12) DBG | uart2="off"
(force12) DBG | lpt1="off"
(force12) DBG | lpt2="off"
(force12) DBG | audio="none"
(force12) DBG | clipboard="disabled"
(force12) DBG | draganddrop="disabled"
(force12) DBG | SessionName="headless"
(force12) DBG | VideoMode="720,400,0"<strong i="6">@0</strong>,0 1
(force12) DBG | vrde="off"
(force12) DBG | usb="off"
(force12) DBG | ehci="off"
(force12) DBG | xhci="off"
(force12) DBG | SharedFolderNameMachineMapping1="Users"
(force12) DBG | SharedFolderPathMachineMapping1="/Users"
(force12) DBG | VRDEActiveConnection="off"
(force12) DBG | VRDEClients=0
(force12) DBG | vcpenabled="off"
(force12) DBG | vcpscreens=0
(force12) DBG | vcpfile="/Users/liz/.docker/machine/machines/force12/force12/force12.webm"
(force12) DBG | vcpwidth=1024
(force12) DBG | vcpheight=768
(force12) DBG | vcprate=512
(force12) DBG | vcpfps=25
(force12) DBG | GuestMemoryBalloon=0
(force12) DBG | GuestOSType="Linux26_64"
(force12) DBG | GuestAdditionsRunLevel=2
(force12) DBG | GuestAdditionsVersion="5.0.8 r103449"
(force12) DBG | GuestAdditionsFacility_VirtualBox Base Driver=50,1449860848913
(force12) DBG | GuestAdditionsFacility_VirtualBox System Service=50,1449860856996
(force12) DBG | GuestAdditionsFacility_Seamless Mode=0,1449860848912
(force12) DBG | GuestAdditionsFacility_Graphics Mode=0,1449860848912
(force12) DBG | }
(force12) DBG | STDERR:
(force12) DBG | {
(force12) DBG | }
(force12) DBG | Using SSH client type: external
(force12) DBG | About to run SSH command:
(force12) DBG | ip addr show dev eth1
(force12) DBG | SSH cmd err, output: <nil>: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | SSH returned: 4: eth1: <BROADCAST,MULTICAST,UP,LOWER_UP> mtu 1500 qdisc pfifo_fast state UP group default qlen 1000
(force12) DBG | link/ether 08:00:27:c0:94:e9 brd ff:ff:ff:ff:ff:ff
(force12) DBG | inet 192.168.99.101/24 brd 192.168.99.255 scope global eth1
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG | inet6 fe80::a00:27ff:fec0:94e9/64 scope link
(force12) DBG | valid_lft forever preferred_lft forever
(force12) DBG |
(force12) DBG | END SSH
(force12) DBG |
Reading CA certificate from /Users/liz/.docker/machine/certs/ca.pem
Reading server certificate from /Users/liz/.docker/machine/machines/force12/server.pem
Reading server key from /Users/liz/.docker/machine/machines/force12/server-key.pem
shell: bash
export DOCKER_TLS_VERIFY="1"
export DOCKER_HOST="tcp://192.168.99.101:2376"
export DOCKER_CERT_PATH="/Users/liz/.docker/machine/machines/force12"
export DOCKER_MACHINE_NAME="force12"
# Run this command to configure your shell:
# eval "$(docker-machine --debug env force12)"
@tdensmore lo antes posible (es importante para nosotros corregirlo), pero como se desconoce la causa subyacente, no podemos comprometernos con un plazo exacto.
nathanleclaire
en 11 dic. 2015
@lizrice ¡Gracias! Echaremos un vistazo.
nathanleclaire
en 11 dic. 2015
Hacer rm -rf /var/lib/docker/network en la máquina host funcionó para mí. Sin embargo, no entiendo por qué sucede: era una máquina nueva, se borró la memoria caché.
vschiavoni
en 14 dic. 2015
No estoy seguro si esto está relacionado, pero lo siguiente falla consistentemente para mí:
docker-machine create -d amazonec2 test
eval $(docker-machine env test)
docker ps # all good
docker-machine stop test
docker-machine start test
eval $(docker-machine env test)
Error running connection boilerplate: Error checking and/or regenerating the certs: There was an error validating certificates for host "54.173.54.43:2376": x509: certificate is valid for 54.152.68.62, not 54.173.54.43
You can attempt to regenerate them using 'docker-machine regenerate-certs name'.
Be advised that this will trigger a Docker daemon restart which will stop running containers.
Estoy ejecutando 0.5.4.
bassam
en 22 dic. 2015
Creo que tengo una pista importante sobre esto. Esta información es una extensión de lo que escribí anteriormente en este comentario .
En mi máquina (Mac OS X 10.11.2, docker-machine versión 0.5.1 (7e8e38e)), he notado que si se produce el error "getsockopt: conexión rechazada" está relacionado con _ cuánto tiempo espero_ para llamar a docker-machine env después de llamar docker-machine restart .
Más específicamente, con el script reset.sh continuación:
#!/bin/bash
docker-machine restart default
sleep $1
docker-machine env default
Me di cuenta de que source reset.sh 1 o source reset.sh 2 tienden a desencadenar el error, pero source reset.sh 3 y superiores siempre tienen éxito. Entonces, esperar un poco después de comenzar ayuda por alguna razón.
También noté que esta línea (configurar el marcador) tiene un tiempo de espera de 2 segundos, pero eso puede estar relacionado o no.
cjerdonek
en 3 ene. 2016
También veo lo mismo que @cjerdonek : después de iniciar la máquina, simplemente esperamos 10 segundos antes de usar el comando docker-machine env . Esto suele solucionar nuestros problemas.
Multiply
en 4 ene. 2016
No estoy seguro de si esto está relacionado, pero intenté ejecutar docker-machine restart default y luego mostrar los procesos en ese grupo de procesos en incrementos de 0,25 segundos. Hice esto para ver si algo seguía funcionando después de que finalizara el reinicio.
Efectivamente, mostró que el proceso secundario /usr/local/bin/docker-machine-driver-virtualbox iniciado por docker-machine continuó ejecutándose durante 0,5 segundos _ después_ de que finalizó el proceso principal docker-machine restart . Entonces, ¿tal vez algo no está terminando limpiamente?
Aquí está mi salida (en incrementos de 0,25 segundos):
running ps:
58257 58257 docker-machine restart default
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
running ps:
58257 58257 docker-machine restart default
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
58257 58667 /Applications/VirtualBox.app/Contents/MacOS/VBoxManage showvminfo default --machinereadable
running ps:
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
running ps:
58257 58258 /usr/local/bin/docker-machine-driver-virtualbox
running ps:
running ps:
Y aquí está el script que usé para generarlo:
#!/bin/bash
pgid=$(ps xao pgid,pid,command | grep "[d]ocker-machine restart" | awk '{print $1}')
echo "pgid: $pgid"
while [ 1 ]
do
echo "running ps:"
ps xao pgid,pid,command | grep -E "^$pgid"
sleep .25
done
Acabo de tener un problema con esto, con 3 adaptadores de red habilitados para la máquina virtual, el último conectado a un adaptador en puente en la conexión ethernet. VM funcionó bien durante mucho tiempo y de repente dejó de funcionar. Resulta que había cambiado de una conexión Ethernet a una conexión inalámbrica, por lo que la VM no pudo resolver una IP en la nueva red, seguí promoviendo para regenerar los certificados, no pudo resolver las IP, etc.
Cambiar la configuración en VirtualBox Manager para usar el nuevo adaptador resolvió el problema, luego, por supuesto, ejecute:
docker-machine regenerate-certs default (o su nombre de VM)
eval "$(docker-machine env default)"
sebastianvilla
en 7 ene. 2016
Espero que esta salida de depuración pueda ser de alguna ayuda ... y FWIW no estoy usando el controlador de AWS.
Pasos para reproducir (en Mac):
Instale DockerToolbox-1.9.1f.pkg y luego instale DockerToolbox-1.9.1g.pkg
Docker version 1.9.1, build a34a1d5
docker-compose version 1.5.2, build 7240ff3
docker-machine version 0.5.5, build 02c4254
el comando que generó esto:
docker-machine --debug create --driver virtualbox --virtualbox-memory 2048 registry
_ Por favor observe el siguiente error (línea 505) _
Generate server cert /usr/local/bin/generate_cert --host=registry,127.0.0.1,10.0.2.15,192.168.99.104 --ca=/var/lib/boot2docker/ca.pem --ca-key=/var/lib/boot2docker/tls/cakey.pem --cert=/var/lib/boot2docker/server.pem --key=/var/lib/boot2docker/server-key.pem --org=Boot2Docker
2016/01/07 05:19:20 Preventing overwrite: the following files already exist: "/var/lib/boot2docker/server.pem" "/var/lib/boot2docker/server-key.pem". To overwrite files, add "--overwrite".
(registro) DBG | "SATA-7-0" = "ninguno"
(registro) DBG | "SATA-8-0" = "ninguno"
(registro) DBG | "SATA-9-0" = "ninguno"
(registro) DBG | "SATA-10-0" = "ninguno"
(registro) DBG | "SATA-11-0" = "ninguno"
(registro) DBG | "SATA-12-0" = "ninguno"
(registro) DBG | "SATA-13-0" = "ninguno"
(registro) DBG | "SATA-14-0" = "ninguno"
(registro) DBG | "SATA-15-0" = "ninguno"
(registro) DBG | "SATA-16-0" = "ninguno"
(registro) DBG | "SATA-17-0" = "ninguno"
(registro) DBG | "SATA-18-0" = "ninguno"
(registro) DBG | "SATA-19-0" = "ninguno"
(registro) DBG | "SATA-20-0" = "ninguno"
(registro) DBG | "SATA-21-0" = "ninguno"
(registro) DBG | "SATA-22-0" = "ninguno"
(registro) DBG | "SATA-23-0" = "ninguno"
(registro) DBG | "SATA-24-0" = "ninguno"
(registro) DBG | "SATA-25-0" = "ninguno"
(registro) DBG | "SATA-26-0" = "ninguno"
(registro) DBG | "SATA-27-0" = "ninguno"
(registro) DBG | "SATA-28-0" = "ninguno"
(registro) DBG | "SATA-29-0" = "ninguno"
(registro) DBG | natnet1 = "nat"
(registro) DBG | macaddress1 = "080027D369AC"
(registro) DBG | cableconnected1 = "encendido"
(registro) DBG | nic1 = "nat"
(registro) DBG | nictype1 = "82540EM"
(registro) DBG | nicspeed1 = "0"
(registro) DBG | mtu = "0"
(registro) DBG | sockSnd = "64"
(registro) DBG | sockRcv = "64"
(registro) DBG | tcpWndSnd = "64"
(registro) DBG | tcpWndRcv = "64"
(registro) DBG | Reenvío (0) = "ssh, tcp, 127.0.0.1,61554`` 22"
(registro) DBG | hostonlyadapter2 = "vboxnet1"
(registro) DBG | macaddress2 = "080027A8AF71"
(registro) DBG | cableconnected2 = "encendido"
(registro) DBG | nic2 = "solo host"
(registro) DBG | nictype2 = "82540EM"
(registro) DBG | nicspeed2 = "0"
(registro) DBG | nic3 = "ninguno"
(registro) DBG | nic4 = "ninguno"
(registro) DBG | nic5 = "ninguno"
(registro) DBG | nic6 = "ninguno"
(registro) DBG | nic7 = "ninguno"
(registro) DBG | nic8 = "ninguno"
(registro) DBG | hidpointing = "ps2mouse"
(registro) DBG | hidkeyboard = "ps2kbd"
(registro) DBG | uart1 = "desactivado"
(registro) DBG | uart2 = "apagado"
(registro) DBG | lpt1 = "apagado"
(registro) DBG | lpt2 = "apagado"
(registro) DBG | audio = "ninguno"
(registro) DBG | portapapeles = "deshabilitado"
(registro) DBG | draganddrop = "deshabilitado"
(registro) DBG | SessionName = "sin cabeza"
(registro) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(registro) DBG | vrde = "apagado"
(registro) DBG | usb = "apagado"
(registro) DBG | ehci = "apagado"
(registro) DBG | xhci = "apagado"
(registro) DBG | SharedFolderNameMachineMapping1 = "Usuarios"
(registro) DBG | SharedFolderPathMachineMapping1 = "/ Usuarios"
(registro) DBG | VRDEActiveConnection = "desactivado"
(registro) DBG | VRDEClients = 0
(registro) DBG | vcpenabled = "apagado"
(registro) DBG | vcpscreens = 0
(registro) DBG | vcpfile = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / registro.webm"
(registro) DBG | vcpwidth = 1024
(registro) DBG | vcpheight = 768
(registro) DBG | vcprate = 512
(registro) DBG | vcpfps = 25
(registro) DBG | GuestMemoryBalloon = 0
(registro) DBG | GuestOSType = "Linux26_64"
(registro) DBG | GuestAdditionsRunLevel = 2
(registro) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(registro) DBG | GuestAdditionsFacility_VirtualBox Base Driver = 50,1452143934925
(registro) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(registro) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(registro) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(registro) DBG | }
(registro) DBG | STDERR:
(registro) DBG | {
(registro) DBG | }
(registro) DBG | Usando el tipo de cliente SSH: externo
(registro) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(registro) DBG | A punto de ejecutar el comando SSH:
(registro) DBG | dirección ip show dev eth1
(registro) DBG | SSH cmd err, salida:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | SSH devuelto: 4: eth1:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | FIN SSH
(registro) DBG |
generando cert de servidor: /Users/todd/.docker/machine/machines/registry/server.pem ca-key = / Users / todd / .docker / machine / certs / ca.pem private-key = / Users / todd /. docker / machine / certs / ca-key.pem org = todd.registry san = 192.168.99.104 localhost Calling .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
sudo /etc/init.d/docker stop
SSH cmd err, salida:
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
Si [ ! -z "$ (ip link show docker0)"]; luego sudo ip link delete docker0; fi
SSH cmd err, salida:
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
printf '% s' '----- COMENZAR EL CERTIFICADO -----
MIICxzCCAbGgAwIBAgIQN5zSGUNnaarpTbKMMbHnJjALBgkqhkiG9w0BAQswDzEN
MAsGA1UEChMEdG9kZDAeFw0xNTA5MDExNjM2MDBaFw0xODA4MTYxNjM2MDBaMA8x
DTALBgNVBAoTBHRvZGQwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDD
NnBEEJhhycZDUQvvfc6mygzjC / gPnrmR5VpmnkvcDg3FXSnihQvsZjIn02u7hXug
3noJ / neFabpacXvIrpvUl7ibehSGOCx / R5tNYX4U2PqLTt / eBpKt / Cq4pjfR7D0o
NCuorNFp97qed0gLHeT1dn7XZiV / r9BtjvCO / k / Pac6xJGx8jmdlkRfHh + DF07lh
QhKoLRoxautz9OYx6mUADKYIRXNeqqLd5sK3V + 89RBE0Fo / nCaRFrVZfhnMbKk7s
hPgrpWHJtwxb8L3KOAxUMNGGrCpbwNgx4OBrw8pcCXAU5xWOw3 / 32TROqZ + WZSQE
UQF34p1 + qtrE2uOb1UtlAgMBAAGjIzAhMA4GA1UdDwEB / wQEAwIArDAPBgNVHRMB
Af8EBTADAQH / MAsGCSqGSIb3DQEBCwOCAQEAcRsUPGDcIbt93lPqjzP1FF7KIP6c
YxPKXJEjfgwr0wmVg7JOeFvg5TojgeTmRT7DEPTdqPnNjQUxEaybDxv6mBVrUibv
BVlWdxTWeP3oPgjoJqvUoMVQzFYxocoEV2tHZiBHiEahdJf9U + Q2UA84wz1sriyb
8YMrmYr9AUrq0STHDW42pmGNLP ++ bYhAHBoQvR96qVegroxerc1piUwoN2GQ3FQU
GqI546vAxienOnU2dEWqMCHokmqipOFMKg3jEvMXusAPZEkoZ5tqKKxpaaSRbUt5
VthAzVpGmo + PmwJ70j0rgPu2k06ddl4R5gf6K814bdpE + 79qKB5DU3pqmA ==
----- FIN DEL CERTIFICADO -----
'| sudo tee /var/lib/boot2docker/ca.pem
SSH cmd err, salida:
MIICxzCCAbGgAwIBAgIQN5zSGUNnaarpTbKMMbHnJjALBgkqhkiG9w0BAQswDzEN
MAsGA1UEChMEdG9kZDAeFw0xNTA5MDExNjM2MDBaFw0xODA4MTYxNjM2MDBaMA8x
DTALBgNVBAoTBHRvZGQwggEiMA0GCSqGSIb3DQEBAQUAA4IBDwAwggEKAoIBAQDD
NnBEEJhhycZDUQvvfc6mygzjC / gPnrmR5VpmnkvcDg3FXSnihQvsZjIn02u7hXug
3noJ / neFabpacXvIrpvUl7ibehSGOCx / R5tNYX4U2PqLTt / eBpKt / Cq4pjfR7D0o
NCuorNFp97qed0gLHeT1dn7XZiV / r9BtjvCO / k / Pac6xJGx8jmdlkRfHh + DF07lh
QhKoLRoxautz9OYx6mUADKYIRXNeqqLd5sK3V + 89RBE0Fo / nCaRFrVZfhnMbKk7s
hPgrpWHJtwxb8L3KOAxUMNGGrCpbwNgx4OBrw8pcCXAU5xWOw3 / 32TROqZ + WZSQE
UQF34p1 + qtrE2uOb1UtlAgMBAAGjIzAhMA4GA1UdDwEB / wQEAwIArDAPBgNVHRMB
Af8EBTADAQH / MAsGCSqGSIb3DQEBCwOCAQEAcRsUPGDcIbt93lPqjzP1FF7KIP6c
YxPKXJEjfgwr0wmVg7JOeFvg5TojgeTmRT7DEPTdqPnNjQUxEaybDxv6mBVrUibv
BVlWdxTWeP3oPgjoJqvUoMVQzFYxocoEV2tHZiBHiEahdJf9U + Q2UA84wz1sriyb
8YMrmYr9AUrq0STHDW42pmGNLP ++ bYhAHBoQvR96qVegroxerc1piUwoN2GQ3FQU
GqI546vAxienOnU2dEWqMCHokmqipOFMKg3jEvMXusAPZEkoZ5tqKKxpaaSRbUt5
VthAzVpGmo + PmwJ70j0rgPu2k06ddl4R5gf6K814bdpE + 79qKB5DU3pqmA ==
----- CERTIFICADO FINAL -----
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
printf '% s' '----- COMENZAR EL CERTIFICADO -----
MIIDDTCCAfWgAwIBAgIRAKIp + qUcAZ1lQMyI6ZNyJ9swDQYJKoZIhvcNAQELBQAw
DzENMAsGA1UEChMEdG9kZDAeFw0xNjAxMDcwNTE0MDBaFw0xODEyMjIwNTE0MDBa
MBgxFjAUBgNVBAoTDXRvZGQucmVnaXN0cnkwggEiMA0GCSqGSIb3DQEBAQUAA4IB
DwAwggEKAoIBAQCzrk5aMnQNq1i + DG / V86bcYUtiaDym8Bp5SHcRnBY6a8MjBX0B
QLQvMzsuo47DXtM9Q7KLTlzMwd0FBtcD / tjKNiJiXS0BVy / k3pNGKD08H0 / zq3Z2
t1gBdap7sxoZEj0qYQsg64iNLdMdv + cdcO7VTDJuELYPrDIm2ZHFJ7RYiwN84qMH
+ 0SEYvDlMmp9vPdnovEdR6bIBXby9Vc3fEj0BOFyswTJM8vEjmuPA6P6manJwoXf
lNUsI7nsj5HGgHvcFoWHWVKAJQoBDh9LSNl99a53ogZX0hywcIzPZz0Jsy5x8ov4
emaYvwXrpjRT6qxD9gsoPqBxParZZl8LFtj9AgMBAAGjWzBZMA4GA1UdDwEB / wQE
AwIDqDAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH / BAIw
ADAaBgNVHREEEzARgglsb2NhbGhvc3SHBMCoY2gwDQYJKoZIhvcNAQELBQADggEB
AG9JpK + tjgs9LC / IMBZgJyxXDto8QZovdC9m2qGp + / xY9UghiXIUpIkGzW9v4GJB
6pytjuHvQMCbkSNhZkGr / pcV5x5d3Y1g7UDvnwgKMhszefyyf96VEvzVRw0ek35A
cGvIFN71VWMxMUJGe2ui2c9pvRfsQKI / aE0HbCnlhriXh5TMUZUoGhKxO / twlVxe
dgRmayGoEgHdfdj6eyy9sAYwSQ8QUsYnf7ZuHHs62zV06jspCX5sLZPEm15znX6b
rCzFix1v97B + qj / y + R7 / eq8l2GGM2P0KzAiql6DtRKlaUzjIPhg + AddXPRXG1XhX
1oJnRKtiDKtQmf9Fo2QYCH8 =
----- CERTIFICADO FINAL -----
'| sudo tee /var/lib/boot2docker/server.pem
SSH cmd err, salida:
MIIDDTCCAfWgAwIBAgIRAKIp + qUcAZ1lQMyI6ZNyJ9swDQYJKoZIhvcNAQELBQAw
DzENMAsGA1UEChMEdG9kZDAeFw0xNjAxMDcwNTE0MDBaFw0xODEyMjIwNTE0MDBa
MBgxFjAUBgNVBAoTDXRvZGQucmVnaXN0cnkwggEiMA0GCSqGSIb3DQEBAQUAA4IB
DwAwggEKAoIBAQCzrk5aMnQNq1i + DG / V86bcYUtiaDym8Bp5SHcRnBY6a8MjBX0B
QLQvMzsuo47DXtM9Q7KLTlzMwd0FBtcD / tjKNiJiXS0BVy / k3pNGKD08H0 / zq3Z2
t1gBdap7sxoZEj0qYQsg64iNLdMdv + cdcO7VTDJuELYPrDIm2ZHFJ7RYiwN84qMH
+ 0SEYvDlMmp9vPdnovEdR6bIBXby9Vc3fEj0BOFyswTJM8vEjmuPA6P6manJwoXf
lNUsI7nsj5HGgHvcFoWHWVKAJQoBDh9LSNl99a53ogZX0hywcIzPZz0Jsy5x8ov4
emaYvwXrpjRT6qxD9gsoPqBxParZZl8LFtj9AgMBAAGjWzBZMA4GA1UdDwEB / wQE
AwIDqDAdBgNVHSUEFjAUBggrBgEFBQcDAgYIKwYBBQUHAwEwDAYDVR0TAQH / BAIw
ADAaBgNVHREEEzARgglsb2NhbGhvc3SHBMCoY2gwDQYJKoZIhvcNAQELBQADggEB
AG9JpK + tjgs9LC / IMBZgJyxXDto8QZovdC9m2qGp + / xY9UghiXIUpIkGzW9v4GJB
6pytjuHvQMCbkSNhZkGr / pcV5x5d3Y1g7UDvnwgKMhszefyyf96VEvzVRw0ek35A
cGvIFN71VWMxMUJGe2ui2c9pvRfsQKI / aE0HbCnlhriXh5TMUZUoGhKxO / twlVxe
dgRmayGoEgHdfdj6eyy9sAYwSQ8QUsYnf7ZuHHs62zV06jspCX5sLZPEm15znX6b
rCzFix1v97B + qj / y + R7 / eq8l2GGM2P0KzAiql6DtRKlaUzjIPhg + AddXPRXG1XhX
1oJnRKtiDKtQmf9Fo2QYCH8 =
----- CERTIFICADO FINAL -----
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
printf '% s' '----- COMIENZA LA CLAVE PRIVADA RSA -----
MIIEpQIBAAKCAQEAs65OWjJ0DatYvgxv1fOm3GFLYmg8pvAaeUh3EZwWOmvDIwV9
AUC0LzM7LqOOw17TPUOyi05czMHdBQbXA / 7YyjYiYl0tAVcv5N6TRig9PB9P86t2
drdYAXWqe7MaGRI9KmELIOuIjS3THb / nHXDu1UwybhC2D6wyJtmRxSe0WIsDfOKj
B / tEhGLw5TJqfbz3Z6LxHUemyAV28vVXN3xI9AThcrMEyTPLxI5rjwOj + pmpycKF
35TVLCO57I + RxoB73BaFh1lSgCUKAQ4fS0jZffWud6IGV9IcsHCMz2c9CbMucfKL
+ HpmmL8F66Y0U + qsQ / YLKD6gcT2q2WZfCxbY / QIDAQABAoIBABP5G0KRey8NzfaK
QWBCDllPA2cz + RIBfJ / gu0Oc2yexVOautH + QJrdcdYawrazv / IFB5jXwBwbHwf7O
DNan3IdVzyqp + te8TlmdmDdjP7NQM739YFS / + qtm3gWUGiGRUnVEhk0pgWtYHbCf
5VvzcskJCE4N038YgBardrW4vSZeVcaDkZI0 / dI + vEfH21xFjbf3lc6916 / eFoa0
fwuZCkPTGunseHkviQPiv5YnrEPReN7TcUnPfqew3PHNI1zPHxN5hHJWPoBFh + fW
c2NREv / RErbGdN + / TQNcjPsLj2VJyEvcoOpyII3FpFP / hI707LF9i2uOSiuKH34N
OpwTpO0CgYEAybmSEFrkOU4tLDkkqdqJkiOpoqlGkeq3kQJJIB9GKHN / mguBqLvZ
2XA27Sk + NOJLA + 3GgEhNf2TotC7B5dFW6FGw9az + XCTo6KQDh5nV8v6dCKUoG3sc
c1gjWCJPwNaIEklZA5fQYY9SonXv7iZn7rWXwZhn / qHhpbGbTvs8SHMCgYEA5AZi
4NZBUSsoAoBndjR5tmMZC + Kas5rucTXCL9ovYoBC + kSrz5tayG1My1vsNuxAAVHw
19QvY00HM + SYiICna1GWp // ufRpUMgrVsqd83oY7N2FaMpy / VWfZXrf3Yt5nHBnO
4lXN3PreRqg28JfvVmdRkc7AHdPY37l2EbzprM8CgYEAv3v5nLDKp2MAGlR76wfZ
QvG7Wv6YUHafnXSv + V / 2dvt8CrwVbhgzKOYOHX3i4MxWLPqOTMNVXTJqem9P + 1mF
x62T7wExykH3HK5j81oh7zGl2sj7k2p / jTYDBuw7DHAYZlNdvb1kPtePt0uAX23x
hnS2Az0qqlj8Gw7GwGhXxuUCgYEAtQQE1qv / qinyVxoMCCBcRtegeHjpio8Bnsmo
YEh6uV1MzlRZeDPB + 74Y6o8MlAU0QlgEM7Hz9IafoyhjlmlbfqyERtW7Q4D1Ocy0
HGEtlZFFzQ7xhaA9m9UXEERGlSws + nfabn7jL / vPHJRJGPHkQ9k9Pdy9UnBsiB44
hphLgK0CgYEAmHhoQB1IPK6auV2oeVocgtiLYSrJI55iCxeJ5IDPfw + qtwfiK6Gb
w4GWkdK15ljRAo4qvAB + f8qpnPFxXzdGxJLt4Y9b4 / 6ie / g3oRpwGBQRm9NJIB / y
/ UXvXEKhtUciq1nuVOvFfE4F9sX9y6rGyhk5X + KA6rQFj9vaW897wgs =
----- FINALIZAR CLAVE PRIVADA RSA -----
'| sudo tee /var/lib/boot2docker/server-key.pem
SSH cmd err, salida:
MIIEpQIBAAKCAQEAs65OWjJ0DatYvgxv1fOm3GFLYmg8pvAaeUh3EZwWOmvDIwV9
AUC0LzM7LqOOw17TPUOyi05czMHdBQbXA / 7YyjYiYl0tAVcv5N6TRig9PB9P86t2
drdYAXWqe7MaGRI9KmELIOuIjS3THb / nHXDu1UwybhC2D6wyJtmRxSe0WIsDfOKj
B / tEhGLw5TJqfbz3Z6LxHUemyAV28vVXN3xI9AThcrMEyTPLxI5rjwOj + pmpycKF
35TVLCO57I + RxoB73BaFh1lSgCUKAQ4fS0jZffWud6IGV9IcsHCMz2c9CbMucfKL
+ HpmmL8F66Y0U + qsQ / YLKD6gcT2q2WZfCxbY / QIDAQABAoIBABP5G0KRey8NzfaK
QWBCDllPA2cz + RIBfJ / gu0Oc2yexVOautH + QJrdcdYawrazv / IFB5jXwBwbHwf7O
DNan3IdVzyqp + te8TlmdmDdjP7NQM739YFS / + qtm3gWUGiGRUnVEhk0pgWtYHbCf
5VvzcskJCE4N038YgBardrW4vSZeVcaDkZI0 / dI + vEfH21xFjbf3lc6916 / eFoa0
fwuZCkPTGunseHkviQPiv5YnrEPReN7TcUnPfqew3PHNI1zPHxN5hHJWPoBFh + fW
c2NREv / RErbGdN + / TQNcjPsLj2VJyEvcoOpyII3FpFP / hI707LF9i2uOSiuKH34N
OpwTpO0CgYEAybmSEFrkOU4tLDkkqdqJkiOpoqlGkeq3kQJJIB9GKHN / mguBqLvZ
2XA27Sk + NOJLA + 3GgEhNf2TotC7B5dFW6FGw9az + XCTo6KQDh5nV8v6dCKUoG3sc
c1gjWCJPwNaIEklZA5fQYY9SonXv7iZn7rWXwZhn / qHhpbGbTvs8SHMCgYEA5AZi
4NZBUSsoAoBndjR5tmMZC + Kas5rucTXCL9ovYoBC + kSrz5tayG1My1vsNuxAAVHw
19QvY00HM + SYiICna1GWp // ufRpUMgrVsqd83oY7N2FaMpy / VWfZXrf3Yt5nHBnO
4lXN3PreRqg28JfvVmdRkc7AHdPY37l2EbzprM8CgYEAv3v5nLDKp2MAGlR76wfZ
QvG7Wv6YUHafnXSv + V / 2dvt8CrwVbhgzKOYOHX3i4MxWLPqOTMNVXTJqem9P + 1mF
x62T7wExykH3HK5j81oh7zGl2sj7k2p / jTYDBuw7DHAYZlNdvb1kPtePt0uAX23x
hnS2Az0qqlj8Gw7GwGhXxuUCgYEAtQQE1qv / qinyVxoMCCBcRtegeHjpio8Bnsmo
YEh6uV1MzlRZeDPB + 74Y6o8MlAU0QlgEM7Hz9IafoyhjlmlbfqyERtW7Q4D1Ocy0
HGEtlZFFzQ7xhaA9m9UXEERGlSws + nfabn7jL / vPHJRJGPHkQ9k9Pdy9UnBsiB44
hphLgK0CgYEAmHhoQB1IPK6auV2oeVocgtiLYSrJI55iCxeJ5IDPfw + qtwfiK6Gb
w4GWkdK15ljRAo4qvAB + f8qpnPFxXzdGxJLt4Y9b4 / 6ie / g3oRpwGBQRm9NJIB / y
/ UXvXEKhtUciq1nuVOvFfE4F9sX9y6rGyhk5X + KA6rQFj9vaW897wgs =
----- FINALIZAR CLAVE PRIVADA RSA -----
(registro) Llamando a .GetURL
(registro) DBG | COMANDO: / usr / local / bin / VBoxManage showvminfo registro --machinereadable
(registro) DBG | STDOUT:
(registro) DBG | {
(registro) DBG | nombre = "registro"
(registro) DBG | grupos = "/"
(registro) DBG | ostype = "Linux 2.6 / 3.x / 4.x (64 bits)"
(registro) DBG | UUID = "16c87535-d443-4d18-8957-4a2a35e1a449"
(registro) DBG | CfgFile = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / registro.vbox"
(registro) DBG | SnapFldr = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / Instantáneas"
(registro) DBG | LogFldr = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / Registros"
(registro) DBG | hardwareuuid = "16c87535-d443-4d18-8957-4a2a35e1a449"
(registro) DBG | memoria = 2048
(registro) DBG | pagefusion = "apagado"
(registro) DBG | vram = 8
(registro) DBG | cpuexecutioncap = 100
(registro) DBG | hpet = "en"
(registro) DBG | chipset = "piix3"
(registro) DBG | firmware = "BIOS"
(registro) DBG | cpus = 1
(registro) DBG | pae = "en"
(registro) DBG | longmode = "activado"
(registro) DBG | cpuid-portability-level = 0
(registro) DBG | bootmenu = "deshabilitado"
(registro) DBG | boot1 = "dvd"
(registro) DBG | boot2 = "dvd"
(registro) DBG | boot3 = "disco"
(registro) DBG | boot4 = "ninguno"
(registro) DBG | acpi = "en"
(registro) DBG | ioapic = "en"
(registro) DBG | biossystemtimeoffset = 0
(registro) DBG | rtcuseutc = "en"
(registro) DBG | hwvirtex = "activado"
(registro) DBG | nestedpaging = "en"
(registro) DBG | largepages = "en"
(registro) DBG | vtxvpid = "activado"
(registro) DBG | vtxux = "activado"
(registro) DBG | paravirtprovider = "predeterminado"
(registro) DBG | VMState = "en ejecución"
(registro) DBG | VMStateChangeTime = "2016-01-07T05: 18: 39.037000000"
(registro) DBG | monitorcount = 1
(registro) DBG | Acelerar3d = "apagado"
(registro) DBG | accelerate2dvideo = "apagado"
(registro) DBG | teleporterenabled = "apagado"
(registro) DBG | teletransportador = 0
(registro) DBG | teleporteraddress = ""
(registro) DBG | teleporterpassword = ""
(registro) DBG | rastreo habilitado = "desactivado"
(registro) DBG | tracing-allow-vm-access = "desactivado"
(registro) DBG | tracing-config = ""
(registro) DBG | autostart-enabled = "apagado"
(registro) DBG | retraso-inicio automático = 0
(registro) DBG | defaultfrontend = ""
(registro) DBG | storagecontrollername0 = "SATA"
(registro) DBG | storagecontrollertype0 = "IntelAhci"
(registro) DBG | storagecontrollerinstance0 = "0"
(registro) DBG | storagecontrollermaxportcount0 = "30"
(registro) DBG | storagecontrollerportcount0 = "30"
(registro) DBG | storagecontrollerbootable0 = "activado"
(registro) DBG | "SATA-0-0" = "/ Usuarios / todd / .docker / máquina / máquinas / registro / boot2docker.iso"
(registro) DBG | "SATA-ImageUUID-0-0" = "b732119e-8237-4676-9b30-b05814370564"
(registro) DBG | "SATA-tempeject" = "desactivado"
(registro) DBG | "SATA-IsEjected" = "desactivado"
(registro) DBG | "SATA-1-0" = "/ Usuarios / todd / .docker / máquina / máquinas / registro / disk.vmdk"
(registro) DBG | "SATA-ImageUUID-1-0" = "80791e9a-dbd2-488c-abe6-5128ea60fb54"
(registro) DBG | "SATA-2-0" = "ninguno"
(registro) DBG | "SATA-3-0" = "ninguno"
(registro) DBG | "SATA-4-0" = "ninguno"
(registro) DBG | "SATA-5-0" = "ninguno"
(registro) DBG | "SATA-6-0" = "ninguno"
(registro) DBG | "SATA-7-0" = "ninguno"
(registro) DBG | "SATA-8-0" = "ninguno"
(registro) DBG | "SATA-9-0" = "ninguno"
(registro) DBG | "SATA-10-0" = "ninguno"
(registro) DBG | "SATA-11-0" = "ninguno"
(registro) DBG | "SATA-12-0" = "ninguno"
(registro) DBG | "SATA-13-0" = "ninguno"
(registro) DBG | "SATA-14-0" = "ninguno"
(registro) DBG | "SATA-15-0" = "ninguno"
(registro) DBG | "SATA-16-0" = "ninguno"
(registro) DBG | "SATA-17-0" = "ninguno"
(registro) DBG | "SATA-18-0" = "ninguno"
(registro) DBG | "SATA-19-0" = "ninguno"
(registro) DBG | "SATA-20-0" = "ninguno"
(registro) DBG | "SATA-21-0" = "ninguno"
(registro) DBG | "SATA-22-0" = "ninguno"
(registro) DBG | "SATA-23-0" = "ninguno"
(registro) DBG | "SATA-24-0" = "ninguno"
(registro) DBG | "SATA-25-0" = "ninguno"
(registro) DBG | "SATA-26-0" = "ninguno"
(registro) DBG | "SATA-27-0" = "ninguno"
(registro) DBG | "SATA-28-0" = "ninguno"
(registro) DBG | "SATA-29-0" = "ninguno"
(registro) DBG | natnet1 = "nat"
(registro) DBG | macaddress1 = "080027D369AC"
(registro) DBG | cableconnected1 = "encendido"
(registro) DBG | nic1 = "nat"
(registro) DBG | nictype1 = "82540EM"
(registro) DBG | nicspeed1 = "0"
(registro) DBG | mtu = "0"
(registro) DBG | sockSnd = "64"
(registro) DBG | sockRcv = "64"
(registro) DBG | tcpWndSnd = "64"
(registro) DBG | tcpWndRcv = "64"
(registro) DBG | Reenvío (0) = "ssh, tcp, 127.0.0.1,61554`` 22"
(registro) DBG | hostonlyadapter2 = "vboxnet1"
(registro) DBG | macaddress2 = "080027A8AF71"
(registro) DBG | cableconnected2 = "encendido"
(registro) DBG | nic2 = "solo host"
(registro) DBG | nictype2 = "82540EM"
(registro) DBG | nicspeed2 = "0"
(registro) DBG | nic3 = "ninguno"
(registro) DBG | nic4 = "ninguno"
(registro) DBG | nic5 = "ninguno"
(registro) DBG | nic6 = "ninguno"
(registro) DBG | nic7 = "ninguno"
(registro) DBG | nic8 = "ninguno"
(registro) DBG | hidpointing = "ps2mouse"
(registro) DBG | hidkeyboard = "ps2kbd"
(registro) DBG | uart1 = "desactivado"
(registro) DBG | uart2 = "apagado"
(registro) DBG | lpt1 = "apagado"
(registro) DBG | lpt2 = "apagado"
(registro) DBG | audio = "ninguno"
(registro) DBG | portapapeles = "deshabilitado"
(registro) DBG | draganddrop = "deshabilitado"
(registro) DBG | SessionName = "sin cabeza"
(registro) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(registro) DBG | vrde = "apagado"
(registro) DBG | usb = "apagado"
(registro) DBG | ehci = "apagado"
(registro) DBG | xhci = "apagado"
(registro) DBG | SharedFolderNameMachineMapping1 = "Usuarios"
(registro) DBG | SharedFolderPathMachineMapping1 = "/ Usuarios"
(registro) DBG | VRDEActiveConnection = "desactivado"
(registro) DBG | VRDEClients = 0
(registro) DBG | vcpenabled = "apagado"
(registro) DBG | vcpscreens = 0
(registro) DBG | vcpfile = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / registro.webm"
(registro) DBG | vcpwidth = 1024
(registro) DBG | vcpheight = 768
(registro) DBG | vcprate = 512
(registro) DBG | vcpfps = 25
(registro) DBG | GuestMemoryBalloon = 0
(registro) DBG | GuestOSType = "Linux26_64"
(registro) DBG | GuestAdditionsRunLevel = 2
(registro) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(registro) DBG | GuestAdditionsFacility_VirtualBox Base Driver = 50,1452143934925
(registro) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(registro) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(registro) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(registro) DBG | }
(registro) DBG | STDERR:
(registro) DBG | {
(registro) DBG | }
(registro) DBG | Usando el tipo de cliente SSH: externo
(registro) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(registro) DBG | A punto de ejecutar el comando SSH:
(registro) DBG | dirección ip show dev eth1
(registro) DBG | SSH cmd err, salida:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | SSH devuelto: 4: eth1:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | FIN SSH
(registro) DBG |
(registro) Llamando a .DriverName
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
printf% s "
EXTRA_ARGS = '
--label provider = virtualbox
'
CACERT = / var / lib / boot2docker / ca.pem
DOCKER_HOST = '- H tcp: //0.0.0.0 : 2376'
DOCKER_STORAGE = aufs
DOCKER_TLS = automático
SERVERKEY = / var / lib / boot2docker / server-key.pem
SERVERCERT = / var / lib / boot2docker / server.pem
"| sudo tee / var / lib / boot2docker / profile
SSH cmd err, salida:
EXTRA_ARGS = '
--label provider = virtualbox
'
CACERT = / var / lib / boot2docker / ca.pem
DOCKER_HOST = '- H tcp: //0.0.0.0 : 2376'
DOCKER_STORAGE = aufs
DOCKER_TLS = automático
SERVERKEY = / var / lib / boot2docker / server-key.pem
SERVERCERT = / var / lib / boot2docker / server.pem
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
sudo /etc/init.d/docker start
SSH cmd err, salida:
Generar certificado de servidor
/ usr / local / bin / generate_cert --host = registro, 127.0.0.1,10.0.2.15,192.168.99.104 --ca = / var / lib / boot2docker / ca.pem --ca-key = / var / lib / boot2docker / tls / cakey.pem --cert = / var / lib / boot2docker / server.pem --key = / var / lib / boot2docker / server-key.pem --org = Boot2Docker
2016/01/07 05:19:20 Prevención de sobrescritura: los siguientes archivos ya existen: "/var/lib/boot2docker/server.pem" "/var/lib/boot2docker/server-key.pem". Para sobrescribir archivos, agregue --overwrite .
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
netstat -an
SSH cmd err, salida:
Proto Recv-Q Send-Q Dirección local Dirección extranjera Estado
tcp 0 0 0.0.0.0:22 0.0.0.0:* ESCUCHAR
tcp 36 0 10.0.2.15:22 10.0.2.2:61576 ESTABLECIDO
tcp 0 0 10.0.2.15:22 10.0.2.2:61562 TIME_WAIT
tcp 0 0 ::: 22 ::: * ESCUCHAR
Sockets de dominio UNIX activos (servidores y establecidos)
Proto RefCnt Flags Tipo Estado Ruta de nodo I
unix 2 [ACC] ESCUCHA DE TRANSMISIÓN 17854 /var/run/acpid.socket
unix 2 [ACC] SEQPACKET LISTENING 14282 / run / udev / control
unix 3 [] DGRAM 14291
unix 3 [] DGRAM 14292
unix 3 [] STREAM CONNECTED 19268
unix 3 [] STREAM CONNECTED 19269
(registro) Llamando a .GetSSHHostname
(registro) Llamando a .GetSSHPort
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHKeyPath
(registro) Llamando a .GetSSHUsername
Usando el tipo de cliente SSH: externo
{[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
A punto de ejecutar el comando SSH:
netstat -an
SSH cmd err, salida:
Proto Recv-Q Send-Q Dirección local Dirección extranjera Estado
tcp 0 0 0.0.0.0:22 0.0.0.0:* ESCUCHAR
tcp 0 0 10.0.2.15:22 10.0.2.2:61562 TIME_WAIT
tcp 36 0 10.0.2.15:22 10.0.2.2:61577 ESTABLECIDO
tcp 0 0 ::: 22 ::: * ESCUCHAR
tcp 0 0 ::: 2376 ::: * ESCUCHAR
Sockets de dominio UNIX activos (servidores y establecidos)
Proto RefCnt Flags Tipo Estado Ruta de nodo I
unix 2 [ACC] ESCUCHA DE TRANSMISIÓN 19354 /var/lib/docker/network/files/bd684d31dc97decf6f6ca4b4b54743921ee24555ae514291d23fa14f6a521a10.sock
unix 2 [ACC] ESCUCHA DE TRANSMISIÓN 19287 /var/run/docker.sock
unix 2 [ACC] ESCUCHA DE TRANSMISIÓN 17854 /var/run/acpid.socket
unix 2 [ACC] SEQPACKET LISTENING 14282 / run / udev / control
unix 3 [] DGRAM 14291
UNIX 3 [] STREAM CONECTADO 19523
unix 3 [] DGRAM 14292
UNIX 3 [] STREAM CONNECTED 19524
(registro) Llamando a .GetIP
(registro) DBG | COMANDO: / usr / local / bin / VBoxManage showvminfo registro --machinereadable
(registro) DBG | STDOUT:
(registro) DBG | {
(registro) DBG | nombre = "registro"
(registro) DBG | grupos = "/"
(registro) DBG | ostype = "Linux 2.6 / 3.x / 4.x (64 bits)"
(registro) DBG | UUID = "16c87535-d443-4d18-8957-4a2a35e1a449"
(registro) DBG | CfgFile = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / registro.vbox"
(registro) DBG | SnapFldr = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / Instantáneas"
(registro) DBG | LogFldr = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / Registros"
(registro) DBG | hardwareuuid = "16c87535-d443-4d18-8957-4a2a35e1a449"
(registro) DBG | memoria = 2048
(registro) DBG | pagefusion = "apagado"
(registro) DBG | vram = 8
(registro) DBG | cpuexecutioncap = 100
(registro) DBG | hpet = "en"
(registro) DBG | chipset = "piix3"
(registro) DBG | firmware = "BIOS"
(registro) DBG | cpus = 1
(registro) DBG | pae = "en"
(registro) DBG | longmode = "activado"
(registro) DBG | cpuid-portability-level = 0
(registro) DBG | bootmenu = "deshabilitado"
(registro) DBG | boot1 = "dvd"
(registro) DBG | boot2 = "dvd"
(registro) DBG | boot3 = "disco"
(registro) DBG | boot4 = "ninguno"
(registro) DBG | acpi = "en"
(registro) DBG | ioapic = "en"
(registro) DBG | biossystemtimeoffset = 0
(registro) DBG | rtcuseutc = "en"
(registro) DBG | hwvirtex = "activado"
(registro) DBG | nestedpaging = "en"
(registro) DBG | largepages = "en"
(registro) DBG | vtxvpid = "activado"
(registro) DBG | vtxux = "activado"
(registro) DBG | paravirtprovider = "predeterminado"
(registro) DBG | VMState = "en ejecución"
(registro) DBG | VMStateChangeTime = "2016-01-07T05: 18: 39.037000000"
(registro) DBG | monitorcount = 1
(registro) DBG | Acelerar3d = "apagado"
(registro) DBG | accelerate2dvideo = "apagado"
(registro) DBG | teleporterenabled = "apagado"
(registro) DBG | teletransportador = 0
(registro) DBG | teleporteraddress = ""
(registro) DBG | teleporterpassword = ""
(registro) DBG | rastreo habilitado = "desactivado"
(registro) DBG | tracing-allow-vm-access = "desactivado"
(registro) DBG | tracing-config = ""
(registro) DBG | autostart-enabled = "apagado"
(registro) DBG | retraso-inicio automático = 0
(registro) DBG | defaultfrontend = ""
(registro) DBG | storagecontrollername0 = "SATA"
(registro) DBG | storagecontrollertype0 = "IntelAhci"
(registro) DBG | storagecontrollerinstance0 = "0"
(registro) DBG | storagecontrollermaxportcount0 = "30"
(registro) DBG | storagecontrollerportcount0 = "30"
(registro) DBG | storagecontrollerbootable0 = "activado"
(registro) DBG | "SATA-0-0" = "/ Usuarios / todd / .docker / máquina / máquinas / registro / boot2docker.iso"
(registro) DBG | "SATA-ImageUUID-0-0" = "b732119e-8237-4676-9b30-b05814370564"
(registro) DBG | "SATA-tempeject" = "desactivado"
(registro) DBG | "SATA-IsEjected" = "desactivado"
(registro) DBG | "SATA-1-0" = "/ Usuarios / todd / .docker / máquina / máquinas / registro / disk.vmdk"
(registro) DBG | "SATA-ImageUUID-1-0" = "80791e9a-dbd2-488c-abe6-5128ea60fb54"
(registro) DBG | "SATA-2-0" = "ninguno"
(registro) DBG | "SATA-3-0" = "ninguno"
(registro) DBG | "SATA-4-0" = "ninguno"
(registro) DBG | "SATA-5-0" = "ninguno"
(registro) DBG | "SATA-6-0" = "ninguno"
(registro) DBG | "SATA-7-0" = "ninguno"
(registro) DBG | "SATA-8-0" = "ninguno"
(registro) DBG | "SATA-9-0" = "ninguno"
(registro) DBG | "SATA-10-0" = "ninguno"
(registro) DBG | "SATA-11-0" = "ninguno"
(registro) DBG | "SATA-12-0" = "ninguno"
(registro) DBG | "SATA-13-0" = "ninguno"
(registro) DBG | "SATA-14-0" = "ninguno"
(registro) DBG | "SATA-15-0" = "ninguno"
(registro) DBG | "SATA-16-0" = "ninguno"
(registro) DBG | "SATA-17-0" = "ninguno"
(registro) DBG | "SATA-18-0" = "ninguno"
(registro) DBG | "SATA-19-0" = "ninguno"
(registro) DBG | "SATA-20-0" = "ninguno"
(registro) DBG | "SATA-21-0" = "ninguno"
(registro) DBG | "SATA-22-0" = "ninguno"
(registro) DBG | "SATA-23-0" = "ninguno"
(registro) DBG | "SATA-24-0" = "ninguno"
(registro) DBG | "SATA-25-0" = "ninguno"
(registro) DBG | "SATA-26-0" = "ninguno"
(registro) DBG | "SATA-27-0" = "ninguno"
(registro) DBG | "SATA-28-0" = "ninguno"
(registro) DBG | "SATA-29-0" = "ninguno"
(registro) DBG | natnet1 = "nat"
(registro) DBG | macaddress1 = "080027D369AC"
(registro) DBG | cableconnected1 = "encendido"
(registro) DBG | nic1 = "nat"
(registro) DBG | nictype1 = "82540EM"
(registro) DBG | nicspeed1 = "0"
(registro) DBG | mtu = "0"
(registro) DBG | sockSnd = "64"
(registro) DBG | sockRcv = "64"
(registro) DBG | tcpWndSnd = "64"
(registro) DBG | tcpWndRcv = "64"
(registro) DBG | Reenvío (0) = "ssh, tcp, 127.0.0.1,61554`` 22"
(registro) DBG | hostonlyadapter2 = "vboxnet1"
(registro) DBG | macaddress2 = "080027A8AF71"
(registro) DBG | cableconnected2 = "encendido"
(registro) DBG | nic2 = "solo host"
(registro) DBG | nictype2 = "82540EM"
(registro) DBG | nicspeed2 = "0"
(registro) DBG | nic3 = "ninguno"
(registro) DBG | nic4 = "ninguno"
(registro) DBG | nic5 = "ninguno"
(registro) DBG | nic6 = "ninguno"
(registro) DBG | nic7 = "ninguno"
(registro) DBG | nic8 = "ninguno"
(registro) DBG | hidpointing = "ps2mouse"
(registro) DBG | hidkeyboard = "ps2kbd"
(registro) DBG | uart1 = "desactivado"
(registro) DBG | uart2 = "apagado"
(registro) DBG | lpt1 = "apagado"
(registro) DBG | lpt2 = "apagado"
(registro) DBG | audio = "ninguno"
(registro) DBG | portapapeles = "deshabilitado"
(registro) DBG | draganddrop = "deshabilitado"
(registro) DBG | SessionName = "sin cabeza"
(registro) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(registro) DBG | vrde = "apagado"
(registro) DBG | usb = "apagado"
(registro) DBG | ehci = "apagado"
(registro) DBG | xhci = "apagado"
(registro) DBG | SharedFolderNameMachineMapping1 = "Usuarios"
(registro) DBG | SharedFolderPathMachineMapping1 = "/ Usuarios"
(registro) DBG | VRDEActiveConnection = "desactivado"
(registro) DBG | VRDEClients = 0
(registro) DBG | vcpenabled = "apagado"
(registro) DBG | vcpscreens = 0
(registro) DBG | vcpfile = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / registro.webm"
(registro) DBG | vcpwidth = 1024
(registro) DBG | vcpheight = 768
(registro) DBG | vcprate = 512
(registro) DBG | vcpfps = 25
(registro) DBG | GuestMemoryBalloon = 0
(registro) DBG | GuestOSType = "Linux26_64"
(registro) DBG | GuestAdditionsRunLevel = 2
(registro) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(registro) DBG | GuestAdditionsFacility_VirtualBox Base Driver = 50,1452143934925
(registro) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(registro) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(registro) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(registro) DBG | }
(registro) DBG | STDERR:
(registro) DBG | {
(registro) DBG | }
(registro) DBG | Usando el tipo de cliente SSH: externo
(registro) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(registro) DBG | A punto de ejecutar el comando SSH:
(registro) DBG | dirección ip show dev eth1
(registro) DBG | SSH cmd err, salida:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | SSH devuelto: 4: eth1:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | FIN SSH
(registro) DBG |
(registro) Llamando a .GetURL
(registro) DBG | COMANDO: / usr / local / bin / VBoxManage showvminfo registro --machinereadable
(registro) DBG | STDOUT:
(registro) DBG | {
(registro) DBG | nombre = "registro"
(registro) DBG | grupos = "/"
(registro) DBG | ostype = "Linux 2.6 / 3.x / 4.x (64 bits)"
(registro) DBG | UUID = "16c87535-d443-4d18-8957-4a2a35e1a449"
(registro) DBG | CfgFile = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / registro.vbox"
(registro) DBG | SnapFldr = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / Instantáneas"
(registro) DBG | LogFldr = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / Registros"
(registro) DBG | hardwareuuid = "16c87535-d443-4d18-8957-4a2a35e1a449"
(registro) DBG | memoria = 2048
(registro) DBG | pagefusion = "apagado"
(registro) DBG | vram = 8
(registro) DBG | cpuexecutioncap = 100
(registro) DBG | hpet = "en"
(registro) DBG | chipset = "piix3"
(registro) DBG | firmware = "BIOS"
(registro) DBG | cpus = 1
(registro) DBG | pae = "en"
(registro) DBG | longmode = "activado"
(registro) DBG | cpuid-portability-level = 0
(registro) DBG | bootmenu = "deshabilitado"
(registro) DBG | boot1 = "dvd"
(registro) DBG | boot2 = "dvd"
(registro) DBG | boot3 = "disco"
(registro) DBG | boot4 = "ninguno"
(registro) DBG | acpi = "en"
(registro) DBG | ioapic = "en"
(registro) DBG | biossystemtimeoffset = 0
(registro) DBG | rtcuseutc = "en"
(registro) DBG | hwvirtex = "activado"
(registro) DBG | nestedpaging = "en"
(registro) DBG | largepages = "en"
(registro) DBG | vtxvpid = "activado"
(registro) DBG | vtxux = "activado"
(registro) DBG | paravirtprovider = "predeterminado"
(registro) DBG | VMState = "en ejecución"
(registro) DBG | VMStateChangeTime = "2016-01-07T05: 18: 39.037000000"
(registro) DBG | monitorcount = 1
(registro) DBG | Acelerar3d = "apagado"
(registro) DBG | accelerate2dvideo = "apagado"
(registro) DBG | teleporterenabled = "apagado"
(registro) DBG | teletransportador = 0
(registro) DBG | teleporteraddress = ""
(registro) DBG | teleporterpassword = ""
(registro) DBG | rastreo habilitado = "desactivado"
(registro) DBG | tracing-allow-vm-access = "desactivado"
(registro) DBG | tracing-config = ""
(registro) DBG | autostart-enabled = "apagado"
(registro) DBG | retraso-inicio automático = 0
(registro) DBG | defaultfrontend = ""
(registro) DBG | storagecontrollername0 = "SATA"
(registro) DBG | storagecontrollertype0 = "IntelAhci"
(registro) DBG | storagecontrollerinstance0 = "0"
(registro) DBG | storagecontrollermaxportcount0 = "30"
(registro) DBG | storagecontrollerportcount0 = "30"
(registro) DBG | storagecontrollerbootable0 = "activado"
(registro) DBG | "SATA-0-0" = "/ Usuarios / todd / .docker / máquina / máquinas / registro / boot2docker.iso"
(registro) DBG | "SATA-ImageUUID-0-0" = "b732119e-8237-4676-9b30-b05814370564"
(registro) DBG | "SATA-tempeject" = "desactivado"
(registro) DBG | "SATA-IsEjected" = "desactivado"
(registro) DBG | "SATA-1-0" = "/ Usuarios / todd / .docker / máquina / máquinas / registro / disk.vmdk"
(registro) DBG | "SATA-ImageUUID-1-0" = "80791e9a-dbd2-488c-abe6-5128ea60fb54"
(registro) DBG | "SATA-2-0" = "ninguno"
(registro) DBG | "SATA-3-0" = "ninguno"
(registro) DBG | "SATA-4-0" = "ninguno"
(registro) DBG | "SATA-5-0" = "ninguno"
(registro) DBG | "SATA-6-0" = "ninguno"
(registro) DBG | "SATA-7-0" = "ninguno"
(registro) DBG | "SATA-8-0" = "ninguno"
(registro) DBG | "SATA-9-0" = "ninguno"
(registro) DBG | "SATA-10-0" = "ninguno"
(registro) DBG | "SATA-11-0" = "ninguno"
(registro) DBG | "SATA-12-0" = "ninguno"
(registro) DBG | "SATA-13-0" = "ninguno"
(registro) DBG | "SATA-14-0" = "ninguno"
(registro) DBG | "SATA-15-0" = "ninguno"
(registro) DBG | "SATA-16-0" = "ninguno"
(registro) DBG | "SATA-17-0" = "ninguno"
(registro) DBG | "SATA-18-0" = "ninguno"
(registro) DBG | "SATA-19-0" = "ninguno"
(registro) DBG | "SATA-20-0" = "ninguno"
(registro) DBG | "SATA-21-0" = "ninguno"
(registro) DBG | "SATA-22-0" = "ninguno"
(registro) DBG | "SATA-23-0" = "ninguno"
(registro) DBG | "SATA-24-0" = "ninguno"
(registro) DBG | "SATA-25-0" = "ninguno"
(registro) DBG | "SATA-26-0" = "ninguno"
(registro) DBG | "SATA-27-0" = "ninguno"
(registro) DBG | "SATA-28-0" = "ninguno"
(registro) DBG | "SATA-29-0" = "ninguno"
(registro) DBG | natnet1 = "nat"
(registro) DBG | macaddress1 = "080027D369AC"
(registro) DBG | cableconnected1 = "encendido"
(registro) DBG | nic1 = "nat"
(registro) DBG | nictype1 = "82540EM"
(registro) DBG | nicspeed1 = "0"
(registro) DBG | mtu = "0"
(registro) DBG | sockSnd = "64"
(registro) DBG | sockRcv = "64"
(registro) DBG | tcpWndSnd = "64"
(registro) DBG | tcpWndRcv = "64"
(registro) DBG | Reenvío (0) = "ssh, tcp, 127.0.0.1,61554`` 22"
(registro) DBG | hostonlyadapter2 = "vboxnet1"
(registro) DBG | macaddress2 = "080027A8AF71"
(registro) DBG | cableconnected2 = "encendido"
(registro) DBG | nic2 = "solo host"
(registro) DBG | nictype2 = "82540EM"
(registro) DBG | nicspeed2 = "0"
(registro) DBG | nic3 = "ninguno"
(registro) DBG | nic4 = "ninguno"
(registro) DBG | nic5 = "ninguno"
(registro) DBG | nic6 = "ninguno"
(registro) DBG | nic7 = "ninguno"
(registro) DBG | nic8 = "ninguno"
(registro) DBG | hidpointing = "ps2mouse"
(registro) DBG | hidkeyboard = "ps2kbd"
(registro) DBG | uart1 = "desactivado"
(registro) DBG | uart2 = "apagado"
(registro) DBG | lpt1 = "apagado"
(registro) DBG | lpt2 = "apagado"
(registro) DBG | audio = "ninguno"
(registro) DBG | portapapeles = "deshabilitado"
(registro) DBG | draganddrop = "deshabilitado"
(registro) DBG | SessionName = "sin cabeza"
(registro) DBG | VideoMode = "720,400,0" @ 0 , 0 1
(registro) DBG | vrde = "apagado"
(registro) DBG | usb = "apagado"
(registro) DBG | ehci = "apagado"
(registro) DBG | xhci = "apagado"
(registro) DBG | SharedFolderNameMachineMapping1 = "Usuarios"
(registro) DBG | SharedFolderPathMachineMapping1 = "/ Usuarios"
(registro) DBG | VRDEActiveConnection = "desactivado"
(registro) DBG | VRDEClients = 0
(registro) DBG | vcpenabled = "apagado"
(registro) DBG | vcpscreens = 0
(registro) DBG | vcpfile = "/ Usuarios / todd / .docker / máquina / máquinas / registro / registro / registro.webm"
(registro) DBG | vcpwidth = 1024
(registro) DBG | vcpheight = 768
(registro) DBG | vcprate = 512
(registro) DBG | vcpfps = 25
(registro) DBG | GuestMemoryBalloon = 0
(registro) DBG | GuestOSType = "Linux26_64"
(registro) DBG | GuestAdditionsRunLevel = 2
(registro) DBG | GuestAdditionsVersion = "5.0.10 r104061"
(registro) DBG | GuestAdditionsFacility_VirtualBox Base Driver = 50,1452143934925
(registro) DBG | GuestAdditionsFacility_VirtualBox System Service = 50,1452143951932
(registro) DBG | GuestAdditionsFacility_Seamless Mode = 0,1452143934925
(registro) DBG | GuestAdditionsFacility_Graphics Mode = 0,1452143934925
(registro) DBG | }
(registro) DBG | STDERR:
(registro) DBG | {
(registro) DBG | }
(registro) DBG | Usando el tipo de cliente SSH: externo
(registro) DBG | {[-o PasswordAuthentication = no -o StrictHostKeyChecking = no -o UserKnownHostsFile = / dev / null -o LogLevel = silencioso -o ConnectionAttempts = 3 -o ConnectTimeout = 10 -o ControlMaster = no -o ControlPath = none [email protected] -o IdentitiesOnly = yes -i /Users/todd/.docker/machine/machines/registry/id_rsa -p 61554] / usr / bin / ssh}
(registro) DBG | A punto de ejecutar el comando SSH:
(registro) DBG | dirección ip show dev eth1
(registro) DBG | SSH cmd err, salida:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | SSH devuelto: 4: eth1:
(registro) DBG | enlace / éter 08: 00: 27: a8: af: 71 brd ff: ff: ff: ff: ff: ff
(registro) DBG | inet 192.168.99.104/24 brd 192.168.99.255 alcance global eth1
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG | inet6 fe80 :: a00: 27ff: fea8: af71 / 64 enlace de alcance
(registro) DBG | valid_lft para siempre preferido_lft para siempre
(registro) DBG |
(registro) DBG | FIN SSH
(registro) DBG |
Leyendo el certificado de CA de /Users/todd/.docker/machine/certs/ca.pem
Leyendo el certificado del servidor de /Users/todd/.docker/machine/machines/registry/server.pem
Leyendo la clave del servidor de /Users/todd/.docker/machine/machines/registry/server-key.pem
Reticular estrías ...
(registro) Llamando a .GetConfigRaw
Hacer una llamada para cerrar el servidor del controlador
(búsqueda de bandera) Llamando a .Close
Llamada realizada con éxito para cerrar el servidor del controlador
f2ef4387b95e: Verificación de suma de comprobación
f2ef4387b95e: Descarga completa
75ed0b50ba1d: Verificación de suma de comprobación
75ed0b50ba1d: Descarga completa
e5ab901dcf2d: Pull complete
30ad296c0ea0: Extracción completa
3dba40dec256: Tire completo
f2ef4387b95e: Extracción completa
53bc8dcc4791: Extracción completa
75ed0b50ba1d: Extracción completa
17c3a7ed5521: Pull complete
8aca9e0ecf68: Tire completo
4d1828359d36: Tire completo
46ed7df7f742: Tire completo
b5e8ce623ef8: Extracción completa
049dca6ef253: Pull complete
bdb608bc4555: Extracción completa
8b3d489cfb73: Extracción completa
c74500bbce24: extracción completa
9f3e605442f6: Tire completo
d9125e9e799b: Extracción completa
Resumen: sha256: 8cc8023462905929df9a79ff67ee435a36848ce7a10f18d6d0faba9306b97274
Estado: imagen más reciente descargada para progrium / consul: última
El empuje se refiere a un repositorio 192.168.99.104:5000/consul
3ba9d8714085: Descarga completa
5768a21d659b: verificación de suma de comprobación
5768a21d659b: Descarga completa
5077391c6e9a: Verificación de suma de comprobación
5077391c6e9a: Descarga completa
3ba9d8714085: Tire completo
e5f84a8bf706: Verificación de suma de comprobación
e5f84a8bf706: Descarga completa
1652c4d60eb0: Tire completo
1be01d0718a5: Tire completo
6c0449c9e602: Verificación de suma de comprobación
6c0449c9e602: Descarga completa
1f9207dd15f1: extracción completa
6c0449c9e602: Tire completo
32e4dbc22c81: Extracción completa
e5f84a8bf706: Pull complete
b212be34ea89: Extracción completa
5768a21d659b: Tire completo
5077391c6e9a: Tire completo
a1c47b5aade9: Pull complete
Resumen: sha256: 74af3b0da0e693e4c1b3ab18602b70b9f5a1135971f12f00b3c2d4d046f8c63f
Estado: imagen más reciente descargada para google / ca went: última
El push se refiere a un repositorio 192.168.99.104:5000/ca went
Enviando lista de imágenes
Hacer una llamada para cerrar la conexión al binario del complemento
(búsqueda de bandera) DBG | Complemento de cierre en el lado del servidor
Hacer una llamada para cerrar el servidor del controlador
(registro) Llamando a .Close
Llamada realizada con éxito para cerrar el servidor del controlador
Hacer una llamada para cerrar la conexión al binario del complemento
(registro) DBG | Complemento de cierre en el lado del servidor
Error al ejecutar la plantilla de conexión: Error al verificar y / o regenerar los certificados: Hubo un error al validar los certificados para el host "192.168.99.104:2376": marque tcp 192.168.99.104:2376: getsockopt: conexión rechazada
Puede intentar regenerarlos usando 'docker-machine regenerate-certs [nombre]'.
Tenga en cuenta que esto activará un reinicio del demonio Docker que detendrá la ejecución de contenedores.
tdensmore
en 7 ene. 2016
Mismo problema en el último OSX
Error al verificar la conexión TLS: Error al verificar y / o regenerar los certificados: Hubo un error al validar los certificados para el host "192.168.99.100:2376": leer tcp 192.168.99.1:56629->192.168.99.100:2376: leer: conexión restablecida por mirar
Puede intentar regenerarlos usando 'docker-machine regenerate-certs [nombre]'.
Tenga en cuenta que esto activará un reinicio del demonio Docker que detendrá la ejecución de contenedores.
Inesperadamente..
¿hay una solución para esto?
Haciendo:
rm -rf /var/lib/docker/network
y reiniciar mi terminal parece solucionar esto por ahora;
muy muy frustrante!
maxa4e
en 8 ene. 2016
He visto este problema con Viktor de Docker, al menos en su caso parece estar relacionado con intentar ejecutar env inmediatamente después de que un start haya finalizado (en un script). Parece que quizás deberíamos esperar a que el demonio de Docker esté activo cuando se ejecuta start , o aumentar el tiempo de espera de marcación TLS.
nathanleclaire
en 12 ene. 2016
¿Cuál es el error que ve Viktor?
dgageot
en 13 ene. 2016
@dgageot Básicamente, había un script que contenía un código como este:
if [[ $(docker-machine status $VM) != "Running" ]]; then
docker-machine start $VM
fi
eval $(docker-machine env $VM)
Y en la línea env se imprimirá un error que indica que se agotó el tiempo de espera del dial TLS al intentar conectarse al punto final. Parece ser porque el demonio de Docker aún no se había iniciado a pesar de que start ya había regresado. (Lo que tiene sentido: que VirtualBox indique que la máquina virtual está "en ejecución" no significa necesariamente que todos los servicios del sistema se hayan iniciado y estén escuchando todavía).
nathanleclaire
en 13 ene. 2016
He visto este problema con Viktor de Docker, al menos en su caso parece estar relacionado con intentar ejecutar env inmediatamente después de que haya finalizado el inicio (en un script).
@nathanleclaire @dgageot Vea mis dos comentarios aquí y aquí sobre este tema hace poco más de una semana haciendo esta misma observación, con un poco más de información y scripts para reproducir.
cjerdonek
en 13 ene. 2016
Gracias @cjerdonek . Es posible que desee probar https://github.com/docker/machine/issues/2936 para ver si soluciona el problema.
nathanleclaire
en 27 ene. 2016
Temas relacionados
moander
·
5Comentarios
rossbachp
·
4Comentarios
jimfleming
·
5Comentarios
pschultz
·
3Comentarios
iongion
·
4Comentarios
Comentario más útil
También experimentando esto. Lo obtuve justo después de actualizar la caja de herramientas, y también esta mañana después de arrancar mi computadora.
Detener e iniciar la máquina virtual no causa el problema.
Ejecutar
docker-machine regenerate-certs <name>te pone en marcha de nuevo.