Deconz-rest-plugin: Question: Case for Raspberry Pi 4 and Raspbee

I got this one https://www.amazon.de/gp/product/B07QTXQ8CZ

You just need to mount the fan on the top of the ceiling rather than inside, so basically the fan will stay outside the case.

The fan has two separate pins for ground and power, so you can connect it to the availble 3.3v GPIOs

It's working good for me. (50 degrees inside a TV cabinet)

Thank you for your feedback

I got this one https://www.amazon.de/gp/product/B07QTXQ8CZ

You just need to mount the fan on the top of the ceiling rather than inside, so basically the fan will stay outside the case.

The fan has two separate pins for ground and power, so you can connect it to the availble 3.3v GPIOs

It's working good for me. (50 degrees inside a TV cabinet)

Thanks for your advice. I can only see one 3.3v pin free (no 17) as the other 3.3v and 5v are used by the raspbee component. Therefore I can’t get the fan to work. Could you point me in the right direction. Cheers

This issue has been automatically marked as stale because it has not had recent activity. It will be closed if no further activity occurs. Thank you for your contributions.

Thanks for your advice. I can only see one 3.3v pin free (no 17) as the other 3.3v and 5v are used by the raspbee component. Therefore I can’t get the fan to work. Could you point me in the right direction. Cheers

Hi @millie75 , I’m looking for the same answer. Did you have any updates or solutions?