Tentei instalar lua-resty-auto-ssl em uma nova instalação do Debian 9
Eu fiz o seguinte
apt update
apt install nginx
apt install build-essential
apt install luarocks
luarocks install lua-resty-auto-ssl
mkdir /etc/resty-auto-ssl
chown www-data /etc/resty-auto-ssl
Em seguida, substituí /etc/nginx/nginx.conf pelo exemplo mínimo postado aqui no leia-me https://github.com/GUI/lua-resty-auto-ssl
Mas depois de substituir o conteúdo do ngix.conf pelo exemplo mínimo, o nginx não pode mais ser iniciado
eu recebo
root<strong i="13">@vultr</strong>:/etc/nginx# /etc/init.d/nginx start
[....] Starting nginx (via systemctl): nginx.serviceJob for nginx.service failed because the control process exited with error code.
See "systemctl status nginx.service" and "journalctl -xe" for details.
failed!
root<strong i="14">@vultr</strong>:/etc
root<strong i="17">@vultr</strong>:/etc/nginx# systemctl status nginx.service
● nginx.service - A high performance web server and a reverse proxy server
Loaded: loaded (/lib/systemd/system/nginx.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sat 2019-02-02 20:17:41 UTC; 50s ago
Docs: man:nginx(8)
Process: 6606 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /run/nginx.pid (code=exited, status=0/SUCCESS)
Process: 483 ExecStart=/usr/sbin/nginx -g daemon on; master_process on; (code=exited, status=0/SUCCESS)
Process: 6923 ExecStartPre=/usr/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=1/FAILURE)
Main PID: 496 (code=exited, status=0/SUCCESS)
Feb 02 20:17:41 vultr.guest systemd[1]: Starting A high performance web server and a reverse proxy server...
Feb 02 20:17:41 vultr.guest nginx[6923]: nginx: [emerg] unknown directive "lua_shared_dict" in /etc/nginx/nginx.conf:14
Feb 02 20:17:41 vultr.guest nginx[6923]: nginx: configuration file /etc/nginx/nginx.conf test failed
Feb 02 20:17:41 vultr.guest systemd[1]: nginx.service: Control process exited, code=exited status=1
Feb 02 20:17:41 vultr.guest systemd[1]: Failed to start A high performance web server and a reverse proxy server.
Feb 02 20:17:41 vultr.guest systemd[1]: nginx.service: Unit entered failed state.
Feb 02 20:17:41 vultr.guest systemd[1]: nginx.service: Failed with result 'exit-code'.
conteúdo do meu nginx.conf
user www-data;
worker_processes auto;
pid /run/nginx.pid;
include /etc/nginx/modules-enabled/*.conf;
events {
worker_connections 1024;
}
http {
# The "auto_ssl" shared dict should be defined with enough storage space to
# hold your certificate data. 1MB of storage holds certificates for
# approximately 100 separate domains.
lua_shared_dict auto_ssl 1m;
# The "auto_ssl_settings" shared dict is used to temporarily store various settings
# like the secret used by the hook server on port 8999. Do not change or
# omit it.
lua_shared_dict auto_ssl_settings 64k;
# A DNS resolver must be defined for OCSP stapling to function.
#
# This example uses Google's DNS server. You may want to use your system's
# default DNS servers, which can be found in /etc/resolv.conf. If your network
# is not IPv6 compatible, you may wish to disable IPv6 results by using the
# "ipv6=off" flag (like "resolver 8.8.8.8 ipv6=off").
resolver 8.8.8.8;
# Initial setup tasks.
init_by_lua_block {
auto_ssl = (require "resty.auto-ssl").new()
-- Define a function to determine which SNI domains to automatically handle
-- and register new certificates for. Defaults to not allowing any domains,
-- so this must be configured.
auto_ssl:set("allow_domain", function(domain)
return true
end)
auto_ssl:init()
}
init_worker_by_lua_block {
auto_ssl:init_worker()
}
# HTTPS server
server {
listen 443 ssl;
# Dynamic handler for issuing or returning certs for SNI domains.
ssl_certificate_by_lua_block {
auto_ssl:ssl_certificate()
}
# You must still define a static ssl_certificate file for nginx to start.
#
# You may generate a self-signed fallback with:
#
# openssl req -new -newkey rsa:2048 -days 3650 -nodes -x509 \
# -subj '/CN=sni-support-required-for-valid-ssl' \
# -keyout /etc/ssl/resty-auto-ssl-fallback.key \
# -out /etc/ssl/resty-auto-ssl-fallback.crt
ssl_certificate /etc/ssl/resty-auto-ssl-fallback.crt;
ssl_certificate_key /etc/ssl/resty-auto-ssl-fallback.key;
}
# HTTP server
server {
listen 80;
# Endpoint used for performing domain verification with Let's Encrypt.
location /.well-known/acme-challenge/ {
content_by_lua_block {
auto_ssl:challenge_server()
}
}
}
# Internal server running on port 8999 for handling certificate tasks.
server {
listen 127.0.0.1:8999;
# Increase the body buffer size, to ensure the internal POSTs can always
# parse the full POST contents into memory.
client_body_buffer_size 128k;
client_max_body_size 128k;
location / {
content_by_lua_block {
auto_ssl:hook_server()
}
}
}
}
Alguma idéia do que está errado?
Parece que o nginx não está carregando lua corretamente.
Aqui está meu dockerfile, baseado no Ubuntu 16:04. Talvez te ajude:
https://pastebin.com/dnENPEaM
Com a configuração correta, sua configuração deve funcionar bem
Parece que o nginx não está carregando lua corretamente.
Aqui está meu dockerfile, baseado no Ubuntu 16:04. Talvez te ajude:
https://pastebin.com/dnENPEaM
Com a configuração correta, sua configuração deve funcionar bem
Obrigado, irei executar manualmente os comandos no arquivo para instalá-lo. Não há problema em instalar o nginx usando o apt antes de tudo, certo?
Comecei a acompanhar seu arquivo, mas não entendo o que essas linhas fazem
ADD mime.types /etc/nginx/
ADD fastcgi_params /etc/nginx/
ADD ./start.sh /root/
Eu fiz todo o resto até aquele ponto e sem erros
Você provavelmente é melhor em usar o openresty
Infelizmente, ainda sem sucesso. Fiz o seguinte em uma nova instalação do Debian 9, desta vez não instalei o Ngix, mas instalei o Openresty
apt update
apt upgrade
wget -qO - https://openresty.org/package/pubkey.gpg | apt-key add -
apt-get -y install software-properties-common
add-apt-repository -y "deb http://openresty.org/package/debian $(lsb_release -sc) openresty"
apt-get update
apt-get install openresty
apt install luarocks
apt install build-essential
luarocks install lua-resty-auto-ssl
mkdir /etc/resty-auto-ssl
chown www-data /etc/resty-auto-ssl
Em seguida, alterei o conteúdo de /etc/openresty/nginx.conf
mas eu recebo o seguinte depois de tentar iniciá-lo
root<strong i="10">@vultr</strong>:/etc/openresty# /etc/init.d/openresty start
[....] Starting openresty (via systemctl): openresty.serviceJob for openresty.service failed because the control process exited with error code.
See "systemctl status openresty.service" and "journalctl -xe" for details.
failed!
e o erro é
root<strong i="14">@vultr</strong>:~# systemctl status --no-pager --full openresty.service
● openresty.service - full-fledged web platform
Loaded: loaded (/lib/systemd/system/openresty.service; enabled; vendor preset: enabled)
Active: failed (Result: exit-code) since Sun 2019-02-03 19:44:22 UTC; 16min ago
Process: 18855 ExecStop=/sbin/start-stop-daemon --quiet --stop --retry QUIT/5 --pidfile /usr/local/openresty/nginx/logs/nginx.pid (code=exited, status=0/SUCCESS)
Process: 18886 ExecStartPre=/usr/local/openresty/nginx/sbin/nginx -t -q -g daemon on; master_process on; (code=exited, status=1/FAILURE)
Main PID: 12782 (code=exited, status=0/SUCCESS)
Feb 03 19:44:22 vultr.guest systemd[1]: Starting full-fledged web platform...
Feb 03 19:44:22 vultr.guest nginx[18886]: nginx: [emerg] BIO_new_file("/etc/ssl/resty-auto-ssl-fallback.crt") failed (SSL: error:02001002:system library:fopen:No such file or directory:fopen('/etc/ssl/resty-auto-ssl-fallback.crt','r') error:2006D080:BIO routines:BIO_new_file:no such file)
Feb 03 19:44:22 vultr.guest nginx[18886]: nginx: configuration file /usr/local/openresty/nginx/conf/nginx.conf test failed
Feb 03 19:44:22 vultr.guest systemd[1]: openresty.service: Control process exited, code=exited status=1
Feb 03 19:44:22 vultr.guest systemd[1]: Failed to start full-fledged web platform.
Feb 03 19:44:22 vultr.guest systemd[1]: openresty.service: Unit entered failed state.
Feb 03 19:44:22 vultr.guest systemd[1]: openresty.service: Failed with result 'exit-code'.
Eu tenho que começar correndo
openssl req -new -newkey rsa:2048 -days 3650 -nodes -x509 -subj '/CN=sni-support-required-for-valid-ssl' \
> -keyout /etc/ssl/resty-auto-ssl-fallback.key -out /etc/ssl/resty-auto-ssl-fallback.crt
O único problema que estou enfrentando agora é que, se eu for para https://mydomain.com, o certificado é de "sni-support-required-for-valid-ssl" e parece que não está gerando certificado letsencrypt para meu domínio.
É um problema de permissão. Se eu mudar o usuário do nginx para root, tudo funcionará bem. Vou encontrar uma maneira de consertá-lo e, em seguida, escreverei um guia de instalação.
Obrigado pela ajuda. Eu escrevi um guia passo a passo para referência futura
Conteúdo do meu nginx.conf
`dados www do usuário;
worker_processes auto;
pid /run/nginx.pid;
incluem /etc/nginx/modules-enabled/*.conf;
eventos {
trabalhador_conexões 768;
}
http {
# configuração básica
sendfile ativado;
tcp_nopush on;
tcp_nodelay on;
keepalive_timeout 65;
types_hash_max_size 2048;
incluem /etc/nginx/mime.types;
default_type application / octet-stream;
# configuração ssl
ssl_protocols TLSv1 TLSv1.1 TLSv1.2;
ssl_prefer_server_ciphers ativado;
# configuração de registro
log_format custom '$ remote_addr - $ remote_user [$ time_local]'
'"$ request" $ status $ body_bytes_sent'
'"$ http_referer" "$ http_user_agent" "$ http_x_forwarded_for"';
access_log /var/log/nginx/access.log custom;
error_log /var/log/nginx/error.log;
# gzip
gzip on;
# configuração de host virtual
inclua /etc/nginx/conf.d/*.conf;
lua_shared_dict prometheus_metrics 10M;
lua_package_path "/home/kunal/Documents/nginx-lua-prometheus/?.lua ;;";
init_worker_by_lua_block {
prometheus = require ("prometheus"). init ("prometheus_metrics")
metric_requests = p rometheus: counter (
"nginx_http_requests_total", "Número de solicitações HTTP", {"host", "status"})
metric_latency = p rometheus: histograma (
"nginx_http_request_duration_seconds", "latência de solicitação HTTP", {"host"})
metric_connections = p rometheus: gauge (
"nginx_http_connections", "Número de conexões HTTP", {"estado"})
}
log_by_lua_block {
requisições metric_
metric_ latency : observe (tonumber (ngx.var.request_time), {ngx.var.server_name})
}
`
Alguma sugestão sobre o que há de errado aqui?
Obrigado pela ajuda. Eu escrevi um guia passo a passo para referência futura
Ei @ arya6000 ,
Estou tendo os mesmos problemas, mas o link que você postou está quebrado :(
Acha que pode me ajudar?