Tasmota: After 8.2.0 Upgrade "BH1750" is now seen as "AM2301 Dew point" sensor.

PROBLEM DESCRIPTION

After the upgrade to 8.2.0 the sensor "BH1750" is now seen as "AM2301 Dew point" sensor.

REQUESTED INFORMATION

_Make sure your have performed every step and checked the applicable boxes before submitting your issue. Thank you!_

• [x] Read the Contributing Guide and Policy and the Code of Conduct
• [x] Searched the problem in issues
• [x] Searched the problem in the docs
• [x] Searched the problem in the forum
• [x] Searched the problem in the chat
• [x] Device used (e.g., Sonoff Basic): NodeMCU
• [x] Tasmota binary firmware version number used: 8.2.0
  
  
  
  • [x] Pre-compiled
  
  
  • [ ] Self-compiled
  
  
  • [ ] IDE / Compiler used: _____
  
  
• [x] Flashing tools used: OTA
• [x] Provide the output of command: Backlog Template; Module; GPIO 255:

  Configuration output here:
20:30:48 MQT: tasmotaTempSensor/stat/RESULT = {"NAME":"Generic","GPIO":[255,255,255,255,255,255,255,255,255,255,255,255,255],"FLAG":15,"BASE":18}
20:30:49 MQT: tasmotaTempSensor/stat/RESULT = {"Module":{"0":"Generic"}}
20:30:49 MQT: tasmotaTempSensor/stat/RESULT = {"GPIO0":{"0":"None"},"GPIO1":{"0":"None"},"GPIO2":{"0":"None"},"GPIO3":{"0":"None"},"GPIO4":{"6":"I2C SDA"},"GPIO5":{"5":"I2C SCL"},"GPIO9":{"0":"None"},"GPIO10":{"0":"None"},"GPIO12":{"0":"None"},"GPIO13":{"0":"None"},"GPIO14":{"2":"AM2301"},"GPIO15":{"0":"None"},"GPIO16":{"0":"None"}}

• [ ] If using rules, provide the output of this command: Backlog Rule1; Rule2; Rule3:

  Rules output here:

• [x] Provide the output of this command: Status 0:

  STATUS 0 output here:
20:30:03 CMD: Status 0
20:30:03 MQT: tasmotaTempSensor/stat/STATUS = {"Status":{"Module":0,"FriendlyName":["Tasmota TempSensor"],"Topic":"tasmotaTempSensor","ButtonTopic":"0","Power":0,"PowerOnState":3,"LedState":6,"LedMask":"FFFF","SaveData":1,"SaveState":1,"SwitchTopic":"0","SwitchMode":[0,0,0,0,0,0,0,0],"ButtonRetain":0,"SwitchRetain":0,"SensorRetain":1,"PowerRetain":0}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS1 = {"StatusPRM":{"Baudrate":115200,"SerialConfig":"8N1","GroupTopic":"tasmotas","OtaUrl":"http://thehackbox.org/tasmota/release/tasmota.bin","RestartReason":"Software/System restart","Uptime":"0T00:19:00","StartupUTC":"2020-03-21T20:11:03","Sleep":100,"CfgHolder":4617,"BootCount":72,"BCResetTime":"2020-03-21T18:59:42","SaveCount":118,"SaveAddress":"FB000"}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS2 = {"StatusFWR":{"Version":"8.2.0(tasmota)","BuildDateTime":"2020-03-20T14:45:23","Boot":31,"Core":"STAGE","SDK":"2.2.2-dev(38a443e)","Hardware":"ESP8266EX","CR":"397/699"}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS3 = {"StatusLOG":{"SerialLog":2,"WebLog":2,"MqttLog":0,"SysLog":0,"LogHost":"","LogPort":514,"SSId":["MartinRouterKing",""],"TelePeriod":300,"Resolution":"558180C0","SetOption":["000A8209","2805C8000100060000005A00000000000000","00000200","00000000"]}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS4 = {"StatusMEM":{"ProgramSize":577,"Free":424,"Heap":23,"ProgramFlashSize":1024,"FlashSize":4096,"FlashChipId":"164020","FlashMode":3,"Features":["00000809","8FDAE397","043683A0","000000CD","010013C0","C000F981","00000004"],"Drivers":"1,2,3,4,5,6,7,8,9,10,12,16,18,19,20,21,22,24,26,27,29,30,35,37","Sensors":"1,2,3,4,5,6"}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS5 = {"StatusNET":{"Hostname":"tasmotaTempSensor","IPAddress":"192.168.1.59","Gateway":"192.168.1.1","Subnetmask":"255.255.255.0","DNSServer":"192.168.1.1","Mac":"DC:4F:22:7D:79:AB","Webserver":2,"WifiConfig":4,"WifiPower":17.0}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS6 = {"StatusMQT":{"MqttHost":"192.168.1.107","MqttPort":1883,"MqttClientMask":"TempSensor","MqttClient":"TempSensor","MqttUser":"MQTT-user","MqttCount":2,"MAX_PACKET_SIZE":1200,"KEEPALIVE":30}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS7 = {"StatusTIM":{"UTC":"2020-03-21T20:30:03","Local":"2020-03-21T20:30:03","StartDST":"2020-03-29T02:00:00","EndDST":"2020-10-25T03:00:00","Timezone":"+00:00","Sunrise":"05:49","Sunset":"18:04"}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS10 = {"StatusSNS":{"Time":"2020-03-21T20:30:03","AM2301":{"Temperature":19.1,"Humidity":64.6,"DewPoint":12.3},"TempUnit":"C"}}
20:30:03 MQT: tasmotaTempSensor/stat/STATUS11 = {"StatusSTS":{"Time":"2020-03-21T20:30:03","Uptime":"0T00:19:00","UptimeSec":1140,"Heap":23,"SleepMode":"Dynamic","Sleep":100,"LoadAvg":9,"MqttCount":2,"Wifi":{"AP":1,"SSId":"MartinRouterKing","BSSId":"38:2C:4A:CA:92:80","Channel":1,"RSSI":100,"Signal":-25,"LinkCount":1,"Downtime":"0T00:00:06"}}}

• [ ] Provide the output of the Console log output when you experience your issue; if applicable:
  _(Please use_ weblog 4 _for more debug information)_

  Console output here:

TO REPRODUCE

_Steps to reproduce the behavior:_

EXPECTED BEHAVIOUR

_A clear and concise description of what you expected to happen._

SCREENSHOTS

_If applicable, add screenshots to help explain your problem._

ADDITIONAL CONTEXT

_Add any other context about the problem here._

(Please, remember to close the issue when the problem has been addressed)