Data.table: كومة الخلل في فرايد

HughParsonage ، يبدو هذا مشابهًا لـ # 2457. ربما حاول تمرير showProgress=FALSE ولاحظ ما إذا كان قد اكتمل.
mattdowle هل يمكن أن يكون هناك تراجع منذ 2017-11-09؟

أدى التشغيل باستخدام showProgress=FALSE إرجاع النتيجة بالفعل (مع التحذيرات المتوقعة فقط).

شكرا لجميع المعلومات التفصيلية. أشك في حدوث انحدار منذ 2017-11-09 ، لكن ربما يكون الناتج الطويل verbose=TRUE له تأثير مماثل على ناتج ETA. يحتاج الملف إلى إعادة قراءة مما يعني إنشاء المزيد من الإخراج. أخشى أن يكون تقريرHughParsonage الذي يوضح أن showProgress = TRUE يعمل بالنسبة له زائفًا وأن المشكلة ستحدث إذا تم تشغيلها من 5 إلى 10 مرات باستخدام مطول = TRUE.

لا توجد أي رسائل مطولة مطبوعة من داخل القسم المتوازي (بخلاف الوقت المتوقع للوصول إلى التقدم الذي تم إصلاحه بالفعل.) ومع ذلك ، هناك رسائل مطولة بعد القراءة الأولى وقبل بدء إعادة القراءة الثانية (وهو ما يحدث لهذا الملف). أفترض أنه من الممكن أنه إذا أدت هذه المطبوعات إلى تشغيل CheckUserInterrupt رقم 100 (انظر # 2457) ، فقد يتسبب ذلك في فشل المنطقة المتوازية الثانية (على الرغم من ذلك). لاستبعاد ذلك على أي حال ، لقد قمت للتو بتغيير جميع الرسائل المطولة لاستخدام REprintf بدلاً من Rprintf (نفس الإصلاح مثل # 2457 لـ ETA). لقد فشل ذلك لأن الاختبارات لم تعثر على الإخراج على stderr - سوف يصلح. بمجرد مروره ، سيتم إنشاء Windows .zip تلقائيًا ، وبعد ذلك يمكنك المحاولة مرة أخرى من فضلك. سأقوم بالتحديث هنا عندما تكون جاهزًا.

حسنًا ، المحاولة الثانية تجتاز عمليات التحقق ويتوفر Windows.zip . HughParsonage هل تمانع في المحاولة مرة أخرى من فضلك؟ لقد أضفت مكالمة إلى R_FlushConsole () بعد الرسائل في وضع الإسهاب قبل إعادة قراءتها مباشرة. هذا التدفق مطلوب فقط على Windows. أظن أنه بدون التدفق ، يتم تحديث وحدة التحكم في بعض الأحيان بعد قليل جدًا عندما تحدث إعادة القراءة المتوازية ومن المعروف أن هذا يسبب مشاكل. الرجاء التكرار 10 مرات ، دائمًا مع كل من verbose=TRUE و showProgress=TRUE . إذا رأيت 10 عمليات تشغيل واضحة ، فسنقول إنها كانت كذلك. وإلا سأفكر مرة أخرى.

للأسف ، لم يتم إصلاحه:

> library(data.table)
data.table 1.10.5 IN DEVELOPMENT built 2017-11-15 00:36:41 UTC; appveyor
  The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
  Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
  Release notes, videos and slides: http://r-datatable.com
> fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "", verbose = FALSE)
Read 26%. ETA 00:00 Warning: stack imbalance in '$', 20 then 22
Read 52%. ETA 00:00 Warning: stack imbalance in '$', 36 then 35
Warning: stack imbalance in '$', 21 then 22
Read 59%. ETA 00:00 Error in fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "",  : 
  unprotect_ptr: pointer not found
In addition: Warning: stack imbalance in '$', 26 then 28
Warning messages:
1: Warning: stack imbalance in '$', 26 then 27
In fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "",  :
  Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
2: In fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "",  :
  Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>
Warning: stack imbalance in 'lapply', 31 then 30
Warning: stack imbalance in '$', 14 then 15

باستخدام verbose=TRUE, showProgress=TRUE حتى بعد 10 مرات لم أحصل على خطأ. هذه نتيجة الناتج العاشر:

Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:02.094 wall clock time
Thread buffers were grown 0 times (if all 1 threads each grew once, this figure would be 1)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 99%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:01.752
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.004s (  0%) Memory map 0.341GB file
   0.008s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.173s (  4%) Allocation of 22885380 rows x 4 cols (0.469GB)
   3.660s ( 95%) Reading 360 chunks of 0.971MB (63547 rows) using 1 threads
   =    0.009s (  0%) Finding first non-embedded \n after each jump
   +    1.946s ( 51%) Parse to row-major thread buffers
   +    1.098s ( 29%) Transpose
   +    0.608s ( 16%) Waiting
   1.752s ( 46%) Rereading 1 columns due to out-of-sample type exceptions
   3.846s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:02.589 wall clock time
Thread buffers were grown 0 times (if all 1 threads each grew once, this figure would be 1)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 99%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:01.418
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.001s (  0%) Memory map 0.341GB file
   0.003s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.574s ( 14%) Allocation of 22885380 rows x 4 cols (0.469GB)
   3.428s ( 86%) Reading 360 chunks of 0.971MB (63547 rows) using 1 threads
   =    0.010s (  0%) Finding first non-embedded \n after each jump
   +    1.988s ( 50%) Parse to row-major thread buffers
   +    1.137s ( 28%) Transpose
   +    0.292s (  7%) Waiting
   1.418s ( 35%) Rereading 1 columns due to out-of-sample type exceptions
   4.007s        Total
There were 20 warnings (use warnings() to see them)

تضمين التغريدة أنا في حيرة من أمري. أنت تقول إنه يعمل بشكل جيد مع verbose=TRUE, showProgress=TRUE وهو ما كنا نأمله - رائع! التي فشلت من قبل أليس كذلك؟ القيمة الافتراضية لـ showProgress هي TRUE على أي حال ولكن عندما تقوم بالتشغيل باستخدام FALSE الافتراضي لـ verbose ، _ثم لا يعمل وترى عدم توازن المكدس؟ من الغريب أن _less_ الإخراج يجعلها تفشل. يرجى تأكيد. إذا كان هذا هو الحال ، فربما أنبح الشجرة الخطأ. إنه يعمل جيدًا هنا بالنسبة لي على نظام Linux لذا فأنا أعتمد عليك في الاختبار على Windows. شكر.
(أيضًا ، في الجزء السفلي من ناتج التشغيل العاشر ، تشير إلى وجود 20 تحذيرًا. أفترض أن هذين التحذيرين يظهران أعلى ، ويتكرران 10 مرات. إذا كان الأمر كذلك ، فمن المنطقي.)

مرحبًا آسف على الارتباك يا مات.

أنت محق في أن الإصدار الأصلي لم يعد يؤدي إلى حدوث عطل ، وبالتحديد الأعمال التالية كما هو متوقع:

fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "")

للتوضيح ، في الأصل ، عندما حدث تعطل في verbose =FALSE (الافتراضي). قمت بتشغيله باستخدام verbose = TRUE قبل تقديم المشكلة ، ولاحظت تحذيرًا من "اختلال توازن المكدس" ولكن لم أواجه أي عطل. مع أحدث إصدار ، لا أتلقى أي عطل (أو في الواقع أي مشاكل) مع verbose = FALSE .

السبب في أنني قلت "غير ثابت" هو أنني لاحظت رسائل التحذير:

Warning messages:
Warning: stack imbalance in '$', 26 then 27
Warning: stack imbalance in 'lapply', 31 then 30
Warning: stack imbalance in '$', 14 then 15

التي بدت غريبة وأعتقد أنها قد تشير إلى مشكلة وثيقة الصلة وليست متطابقة. بعد قولي هذا ، لم يعد بإمكاني هذا الصباح في أستراليا إعادة إنتاج رسائل التحذير.

حسنا فهمت. هذه الرسائل التحذيرية حول عدم توازن المكدس هي في الأساس أخطاء ، نعم. لا يمكننا تخطيهم. أنا أسمي هذا التحذير بشأن عدم توازن المكدس تعطلًا ، على الرغم من أنه لم ينهار بالفعل بعد. (إنها مسألة وقت فقط حتى يتعطل بعد رؤية هذا التحذير).

عندما تقوم بتشغيل 10 في جلسة R جديدة مع verbose=TRUE, showProgress=TRUE ، فهذه أي من التحذيرات العشرين حول عدم توازن المكدس أو جميعها عبارة عن تحذيرات منتظمة التالية.

1: In fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "",  :
  Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
2: In fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "",  :
  Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>

بمجرد ظهور تحذير بشأن عدم توازن المكدس ، يرجى بدء جلسة R جديدة. لا يمكننا الوثوق بأي شيء من R بعد حدوث ذلك ولو مرة واحدة.

تمكنت من الحصول على حادث عندما ركضت مع verbose=TRUE, showProgress=TRUE . شيء ما عن const char مع SEXP . أحاول إعادة إنتاج هذا من سطر الأوامر (لسوء الحظ حدث ذلك في RStudio وتم إغلاق RStudio قبل أن أتمكن من قراءة الرسالة بأكملها).

لا يمكن إعادة إنتاج العطل. ها هي النتيجة بعد إعادة التشغيل. كان هناك تحذير من عدم توازن المكدس:

> library(data.table)
data.table 1.10.5 IN DEVELOPMENT built 2017-11-15 00:36:41 UTC; appveyor
  The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
  Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
  Release notes, videos and slides: http://r-datatable.com
> for (i in 1:10) fread("SA2-by-DJZ-2011.csv", header = FALSE, na.strings = "", verbose = TRUE, showProgress = TRUE)
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.212 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 31%. ETA 00:00 Warning: stack imbalance in '$', 24 then 23
Read 91%. ETA 00:00 Warning: stack imbalance in '$', 27 then 26
Read 95%. ETA 00:00 Warning: stack imbalance in '$', 28 then 29
Read 98%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.895
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.029s (  1%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.314s ( 15%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.761s ( 84%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.015s (  1%) Finding first non-embedded \n after each jump
   +    0.599s ( 28%) Parse to row-major thread buffers
   +    0.400s ( 19%) Transpose
   +    0.746s ( 35%) Waiting
   0.895s ( 42%) Rereading 1 columns due to out-of-sample type exceptions
   2.107s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.335 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 98%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:01.049
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.006s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.402s ( 17%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.974s ( 83%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.209s (  9%) Parse to row-major thread buffers
   +    0.864s ( 36%) Transpose
   +    0.900s ( 38%) Waiting
   1.049s ( 44%) Rereading 1 columns due to out-of-sample type exceptions
   2.385s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.212 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 96%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.414
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.007s (  0%) sep=',' ncol=4 and header detection
   0.002s (  0%) Column type detection using 10027 sample rows
   0.293s ( 18%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.322s ( 81%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.199s ( 12%) Parse to row-major thread buffers
   +    0.822s ( 51%) Transpose
   +    0.301s ( 19%) Waiting
   0.414s ( 25%) Rereading 1 columns due to out-of-sample type exceptions
   1.626s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.451 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 97%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.409
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.006s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.403s ( 22%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.448s ( 78%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.194s ( 10%) Parse to row-major thread buffers
   +    0.974s ( 52%) Transpose
   +    0.279s ( 15%) Waiting
   0.409s ( 22%) Rereading 1 columns due to out-of-sample type exceptions
   1.860s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.480 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 99%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.412
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.007s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.459s ( 24%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.424s ( 75%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.197s ( 10%) Parse to row-major thread buffers
   +    0.938s ( 50%) Transpose
   +    0.288s ( 15%) Waiting
   0.412s ( 22%) Rereading 1 columns due to out-of-sample type exceptions
   1.892s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.381 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 97%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.401
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.005s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.384s ( 22%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.389s ( 78%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.196s ( 11%) Parse to row-major thread buffers
   +    0.911s ( 51%) Transpose
   +    0.281s ( 16%) Waiting
   0.401s ( 22%) Rereading 1 columns due to out-of-sample type exceptions
   1.781s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.384 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 98%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.480
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.006s (  0%) sep=',' ncol=4 and header detection
   0.002s (  0%) Column type detection using 10027 sample rows
   0.476s ( 26%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.378s ( 74%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.192s ( 10%) Parse to row-major thread buffers
   +    0.833s ( 45%) Transpose
   +    0.352s ( 19%) Waiting
   0.480s ( 26%) Rereading 1 columns due to out-of-sample type exceptions
   1.864s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.374 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 98%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.507
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.006s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.311s ( 17%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.562s ( 83%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.193s ( 10%) Parse to row-major thread buffers
   +    0.988s ( 52%) Transpose
   +    0.381s ( 20%) Waiting
   0.507s ( 27%) Rereading 1 columns due to out-of-sample type exceptions
   1.881s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.318 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 96%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.493
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.006s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.306s ( 17%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.496s ( 83%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.193s ( 11%) Parse to row-major thread buffers
   +    0.935s ( 52%) Transpose
   +    0.367s ( 20%) Waiting
   0.493s ( 27%) Rereading 1 columns due to out-of-sample type exceptions
   1.811s        Total
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapping ... ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \r-only line endings are not allowed because \n is found in the data
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 11051  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 11051
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[12] Finalizing the datatable
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:01.141 wall clock time
Thread buffers were grown 0 times (if all 12 threads each grew once, this figure would be 12)
Final type counts
         0 : drop     
         1 : bool8    
         0 : bool8    
         0 : bool8    
         0 : bool8    
         1 : int32    
         0 : int64    
         0 : float64  
         0 : float64  
         0 : float64  
         2 : string   
Rereading 1 columns due to out-of-sample type exceptions.
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 98%. ETA 00:00 
[12] Finalizing the datatable
Reread 22885380 rows x 1 columns in 00:00.506
Read 22885380 rows. Exactly what was estimated and allocated up front
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.007s (  0%) sep=',' ncol=4 and header detection
   0.001s (  0%) Column type detection using 10027 sample rows
   0.132s (  8%) Allocation of 22885380 rows x 4 cols (0.469GB)
   1.506s ( 91%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.001s (  0%) Finding first non-embedded \n after each jump
   +    0.195s ( 12%) Parse to row-major thread buffers
   +    0.938s ( 57%) Transpose
   +    0.371s ( 23%) Waiting
   0.506s ( 31%) Rereading 1 columns due to out-of-sample type exceptions
   1.647s        Total
Warning: stack imbalance in 'for', 2 then 8
There were 20 warnings (use warnings() to see them)

الغريب أن اليقين عظيم. شكر. هذا يعني أن التدفق لم يعمل وسأضطر إلى إيجاد طريقة لتجنب Rprintf بعد كل شيء. إنه يعمل بشكل موثوق مع verbose=FALSE, showProgress=FALSE أفترض (لقد كتبت ذلك بالقرب من الجزء العلوي من هذه المشكلة لذلك أنا أعتمد على ذلك.) تعني "موثوق" 10 عمليات تشغيل متتالية مع التحذيرات المتوقعة فقط وعدم رؤية المجموعة تحذير عدم التوازن.
اتركها معي بعد ذلك. شكرا لك مرة أخرى.

HughParsonage حسنًا ، يرجى المحاولة مرة أخرى مع المحاولة الثانية الأخيرة. لم يتم دمجها في النسخة الرئيسية حتى الآن ، لذا يرجى توخي الحذر لجلب Windows.zip من الفرع هنا . كما كان من قبل ، يرجى تقديم الإخراج الكامل في كلتا الحالتين حتى أتمكن من التحقق منه. شكر!

أدت المحاولة الأولى لما يلي إلى حدوث عطل (شيء يتعلق بمؤشر).

المحاولة الثانية (بعد إعادة التشغيل) ينتج عنها تحذير stack imbalance in '$', 16 then 15 .

# Assert that `data.table` is not installed:
stopifnot(!requireNamespace("data.table", quietly = TRUE))

install.packages("https://ci.appveyor.com/api/buildjobs/bpsehtwybbbgbyy3/artifacts/data.table_1.10.5.zip",
                 repos = NULL)
# Installing package into ‘C:/Users/hughp/Documents/R/win-library/3.4’
# (as ‘lib’ is unspecified)
# trying URL 'https://ci.appveyor.com/api/buildjobs/bpsehtwybbbgbyy3/artifacts/data.table_1.10.5.zip'
# Content type 'application/octet-stream' length 1557502 bytes (1.5 MB)
# downloaded 1.5 MB

library(data.table)
# data.table 1.10.5 IN DEVELOPMENT built 2017-11-17 01:38:17 UTC; appveyor
# The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
# Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
# Release notes, videos and slides: http://r-datatable.com

setwd("~/ABS-data/inbox/SA2-by-DJZ-2011/")
fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "", header = FALSE)
# Input contains no \n. Taking this to be a filename to open
# [01] Check arguments
# Using 12 threads (omp_get_max_threads()=12, nth=12)
# NAstrings = [<<>>]
# None of the NAstrings look like numbers.
# show progress = 1
# 0/1 column will be read as boolean
# [02] Opening the file
# Opening file SA2-by-DJZ-2011.csv
# File opened, size = 349.4MB (366418725 bytes).
# Memory mapping ... ok
# [03] Detect and skip BOM
# [04] Arrange mmap to be \0 terminated
# \r-only line endings are not allowed because \n is found in the data
# [05] Skipping initial rows if needed
# Positioned on line 1 starting: <<Australian Bureau of Statistic>>
#   [06] Detect separator, quoting rule, and ncolumns
# Detecting sep ...
# sep=','  with 89 lines of 4 fields using quote rule 0
# Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
#   Quote rule picked = 0
# fill=false and the most number of columns found is 4
# [07] Detect column types, good nrow estimate and whether first row is column names
# 'header' changed by user from 'auto' to false
# Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
# Type codes (jump 000)    : 1551  Quote rule 0
# Type codes (jump 100)    : 1A51  Quote rule 0
# =====
#   Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
# Bytes from first data row on line 12 to the end of last row: 366418143
# Line length: mean=16.02 sd=0.21 min=16 max=29
# Estimated number of rows: 366418143 / 16.02 = 22877178
# Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
# =====
#   [08] Assign column names
# [09] Apply user overrides on column types
# After 0 type and 0 drop user overrides : 1A51
# [10] Allocate memory for the datatable
# Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
# [11] Read the data
# jumps=[0..360), chunk_size=1017828, total_size=366418143
# Read 78%. ETA 00:00 Warning: stack imbalance in '$', 16 then 15
# Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:02.677 wall clock time
# [12] Finalizing the datatable
# Type counts:
#   1 : bool8     '1'
# 1 : int32     '5'
# 2 : string    'A'
# =============================
#   0.002s (  0%) Memory map 0.341GB file
# 0.007s (  0%) sep=',' ncol=4 and header detection
# 0.001s (  0%) Column type detection using 10027 sample rows
# 0.297s ( 11%) Allocation of 25164895 rows x 4 cols (0.469GB) of which 22885380 ( 91%) rows used
# 2.369s ( 89%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
# =    0.003s (  0%) Finding first non-embedded \n after each jump
# +    0.273s ( 10%) Parse to row-major thread buffers (grown 0 times)
# +    1.313s ( 49%) Transpose
# +    0.780s ( 29%) Waiting
# 0.893s ( 33%) Rereading 1 columns due to out-of-sample type exceptions
# 2.677s        Total
# Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
# V1        V2      V3 V4
# 1: Goulburn 110018063    3499 NA
# 2:       NA 110018064     812 NA
# 3:       NA 110018065    2158 NA
# 4:       NA 110019999     402 NA
# 5:       NA 110028068      10 NA
# ---                              
#   22885376:       NA 997999799       0 NA
# 22885377:       NA 998999899      64 NA
# 22885378:       NA 994999499      34 NA
# 22885379:       NA 0&&&&&&&&  250796 NA
# 22885380:       NA 0@@@@@@@@ 7305367 NA
# Warning messages:
#   1: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
#                 Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
#               2: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
#               Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>

مرحبًاmattdowle. لا تزال هناك إصدارات من GCC قيد الاستخدام ، حيث يكون OpenMP 3.1 وليس 4.0. جريت إلى أن المشكلة في واحدة من مجموعتي على كرا ( Delaporte ) حيث حاولت استخدام التوجيه SIMD (قانون الزواج 4.0) التي جمعتها مع Rtools ل Windows (على أساس 4.9.3) ولكن رمى والخطأ على جهاز لينكس شخص ما تزال تستخدم دول مجلس التعاون الخليجي 4.8.0. حتى Windows يمكنه فقط استخدام 4.0 وليس 4.5 مكالمات ، إذا كنت أتذكر بشكل صحيح. ربما هذا يساهم في القضية؟

HughParsonage شكرا للاختبار بسرعة! حسنًا ، سأستمر في التفكير بعد ذلك!
aadler هذه فكرة جيدة - كل شيء ممكن.

HughParsonage فقط للتأكيد من فضلك أن نفس الأمر مع تغيير واحد فقط ( verbose=FALSE ) يعمل بشكل جيد؟ أي fread("SA2-by-DJZ-2011.csv", verbose = FALSE, na.strings = "", header = FALSE) . سيظل مقياس التقدم معروضًا.

نعم ، أدى تشغيل هذا الأمر (عشر مرات) إلى إرجاع النتيجة المتوقعة (أي جدول البيانات مع تحذيرين فقط لأنه تم تنسيقه بشكل سيء). لا تحذيرات عدم توازن المكدس.

شكر. لذلك يبدو أنه مرتبط بإخراج وحدة التحكم بعد ذلك. زوجان أشياء أخرى لتجربتها ...

في الوضع المطول ، توجد بعض الفروع داخل المنطقة الموازية التي تستدعي wallclock() . لقد قمت باختصار ذلك لإرجاع 0.0 دائمًا وتجنب استدعاء النظام ، لاستبعاد ذلك. اعتقدت أنه كان آمنًا ولكن ربما لا. يرجى تجربة Windows.zip الجديد من الفرع المعاد بناؤه هنا .

المحاولة الأولى:

install.packages("https://ci.appveyor.com/api/buildjobs/o0pn9ttkrbqgqw2k/artifacts/data.table_1.10.5.zip",
                 repos = NULL)
# Installing package into ‘C:/Users/hughp/Documents/R/win-library/3.4’
# (as ‘lib’ is unspecified)
# trying URL 'https://ci.appveyor.com/api/buildjobs/o0pn9ttkrbqgqw2k/artifacts/data.table_1.10.5.zip'
# Content type 'application/octet-stream' length 1556972 bytes (1.5 MB)
# downloaded 1.5 MB
# 
# package ‘data.table’ successfully unpacked and MD5 sums checked

library(data.table)
# data.table 1.10.5 IN DEVELOPMENT built 2017-11-17 03:49:20 UTC; appveyor
# The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
# Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
# Release notes, videos and slides: http://r-datatable.com
fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "", header = FALSE)

المحاولة الثانية ، أتلقى التحذيرات التالية:

Read 22%. ETA 00:00 Error in fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  : 
  unprotect_ptr: pointer not found
In addition: Warning messages:
1: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
  Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
2: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
 Warning: stack imbalance in '$', 29 then 28
 Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>
Warning: stack imbalance in 'lapply', 125 then 126
Warning: stack imbalance in 'lapply', 55 then 53
Warning: stack imbalance in 'lapply', 30 then 34
Warning: stack imbalance in '<-', 28 then 31
Warning: stack imbalance in '{', 24 then 27
Warning: stack imbalance in '{', 18 then 21

مجرد فكرة: هل يمكن أن تكون هذه مشكلة في RStudio؟ لا يبدو أن تشغيل البرنامج النصي من الجهاز يتكاثر بسهولة. أنا أركض من RStudio لأنه يجعل نسخ إخراج وحدة التحكم أسهل.

عندما تقول أنها لا تتكاثر _ بسهولة _ خارج RStudio ، فهل تتكاثر _على الإطلاق _؟ حتى لو حدث ذلك داخل RStudio فقط ، فإنه لا يزال شيئًا أهدف إلى إصلاحه على جانب data.table. أنا فقط أسأل كطريق آخر لتأكيد أنه بالتأكيد هو إخراج وحدة التحكم "فقط" وليس بعض اختلال توازن المكدس الحقيقي في منطق fread.

ما زلت أقوم بإعادة الإنتاج خارج RStudio على الإطلاق ، ويمكنني إعادة الإنتاج بداخله بشكل موثوق (أي يمكنني إعادة إنتاج بعض التحذيرات أو التعطل). لقد جربت موجه أوامر Windows و git shell (في Windows).

أنا أستخدم RStudio الإصدار 1.1.383 على Windows. هل سيكون من المفيد لك أن أثير هذه المشكلة معهم أيضًا ، أم تريد مني الانتظار؟

شكر. من المفيد حقًا معرفة أنه داخل RStudio فقط. لا حاجة لرفعها معهم. هذا يعني فقط أنه شيء يتعلق بالتخزين المؤقت لوحدة التحكم في الإخراج (أو ما شابه). لقد تقدمت في العمل وأوشك على الدفع.

لا أرى سبب عدم قيام Windows بترجمة هذا التغيير:
fread.c:1054:3: warning: too many arguments for format [-Wformat-extra-args]
يعمل بشكل جيد هنا على Linux وعلى Travis. هذا يمنع إنشاء Windows.zip لاختبار هذا الحل البديل. سآخذ للنوم عليه.
(إنها تشكو من السطر 1054 ولكن ليس السطر 1055 التالي الذي يمثل نفس اللغة. يجب أن يكون هناك بعض الاختلاف.٪ llu مشكلة مع __VA_ARGS__ على Windows - بالتأكيد لا.)

حسنًا ، أخيرًا أصبح windows.zip جاهزًا للمحاولة مرة أخرى من فضلك هنا .

هناك العديد من الحلول في هذا الفرع الآن. إذا نجحت ، سأبدأ في إزالة الحلول لتحديد أي منها كان. تبدو تحذيرات المترجم llu الأكثر واعدة لأن ذلك سيؤدي إلى عدم توازن المكدس في الإخراج المطول ، بما يتوافق مع التفسير @ st-pasha الموجود هنا . ربما كانت الطبقة Rprintf تخفي ذلك من المحول البرمجي الذي يمكنها رؤيته الآن أنه يستخدم fprintf مباشرة.

في المحاولة الثانية (بعد إعادة التشغيل)

stopifnot(!requireNamespace("data.table", quietly = TRUE))
install.packages("https://ci.appveyor.com/api/buildjobs/1pi0ae5iuyj9rhj8/artifacts/data.table_1.10.5.zip",
                 repos = NULL)
# Installing package into ‘C:/Users/hughp/Documents/R/win-library/3.4’
# (as ‘lib’ is unspecified)
# trying URL 'https://ci.appveyor.com/api/buildjobs/1pi0ae5iuyj9rhj8/artifacts/data.table_1.10.5.zip'
# Content type 'application/octet-stream' length 1559167 bytes (1.5 MB)
# downloaded 1.5 MB
# 
# package ‘data.table’ successfully unpacked and MD5 sums checked

library(data.table)
# data.table 1.10.5 IN DEVELOPMENT built 2017-11-18 04:58:23 UTC; appveyor
# The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
# Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
# Release notes, videos and slides: http://r-datatable.com

fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "", header = FALSE)
Log file:  C:\Users\hughp\AppData\Local\Temp\RtmpIT9H0D/fread.out 
Input contains no \n. Taking this to be a filename to open
Read 11%. ETA 00:00 Warning: stack imbalance in '$', 19 then 20
Read 28%. ETA 00:00 Warning: stack imbalance in '$', 19 then 20
Read 48%. ETA 00:00 Warning: stack imbalance in '$', 20 then 19
Read 98%. ETA 00:00 [01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapped ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 1A51  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 1A51
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:02.822 wall clock time
[12] Finalizing the datatable
  Type counts:
         1 : bool8     '1'
         1 : int32     '5'
         2 : string    'A'
=============================
   0.000s (  0%) Memory map 0.341GB file
   0.001s (  0%) sep=',' ncol=4 and header detection
   0.000s (  0%) Column type detection using 10027 sample rows
   0.291s ( 10%) Allocation of 25164895 rows x 4 cols (0.469GB) of which 22885380 ( 91%) rows used
   2.531s ( 90%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.002s (  0%) Finding first non-embedded \n after each jump
   +    0.282s ( 10%) Parse to row-major thread buffers (grown 0 times)
   +    1.537s ( 54%) Transpose
   +    0.710s ( 25%) Waiting
   0.842s ( 30%) Rereading 1 columns due to out-of-sample type exceptions
   2.822s        Total
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
                V1        V2      V3 V4
       1: Goulburn 110018063    3499 NA
       2:       NA 110018064     812 NA
       3:       NA 110018065    2158 NA
       4:       NA 110019999     402 NA
       5:       NA 110028068      10 NA
      ---                              
22885376:       NA 997999799       0 NA
22885377:       NA 998999899      64 NA
22885378:       NA 994999499      34 NA
22885379:       NA 0&&&&&&&&  250796 NA
22885380:       NA 0@@@@@@@@ 7305367 NA
Warning messages:
1: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
  Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
2: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
  Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>

مرة أخرى ، لا يمكن استنساخه خارج RStudio.

شكرا للاختبار بسرعة. حسنًا ، هذا بالتأكيد يستبعد الكثير إذن! بقيت فكرتان. أول واحد يدفع ويمر. الرجاء تجربة Windows.zip الجديد هنا . هذا alloca موجود في المكدس ويتعلق بـ na.strings الذي تقوم بتعيينه فور حدوثه. بالتأكيد في المنطقة الصحيحة (كومة الخلل) وتستحق المحاولة.

لا توجد مشكلة - سأكون بعيدًا لمدة 12 ساعة أو حتى لا يمكنني الاختبار حتى ذلك الحين.
يوم السبت ، 18 نوفمبر 2017 الساعة 5:20 مساءً ، كتب Matt Dowle [email protected] :

شكرا للاختبار بسرعة. حسنًا ، هذا بالتأكيد يستبعد الكثير إذن!
بقيت فكرتان. أول واحد يدفع ويمر. الرجاء تجربة Windows.zip الجديد
هنا
https://ci.appveyor.com/project/Rdatatable/data-table/build/1.0.1363/job/fo02vnbu5ebhwy3w/artifacts .
يتم تخصيص هذا التخصيص على المكدس ويتعلق بـ na.strings التي
أنت تضع كما يحدث. بالتأكيد في المنطقة الصحيحة (مكدس
عدم التوازن) ويستحق المحاولة.

-
أنت تتلقى هذا لأنه تم ذكرك.

قم بالرد على هذا البريد الإلكتروني مباشرة ، وقم بعرضه على GitHub
https://github.com/Rdatatable/data.table/issues/2481#issuecomment-345421856 ،
أو كتم الخيط
https://github.com/notifications/unsubscribe-auth/AHvGDGa5Qnls5eSFBMaQO5s8DElfrpKSks5s3ncqgaJpZM4QcuPc
.

طيب لا تقلق. شكر! لقد دفعت بالفكرة الثانية الآن أيضًا. يبدو أنني أتذكر \r تسبب في مشكلة على Windows في الماضي لكنني لا أتذكر عدم توازن المكدس. على أي حال ، لاستبعاد ذلك ، قمت بإزالة \r من مقياس التقدم. يبدو أن رسالة عدم توازن المكدس تتم طباعتها حيث تحدث خطوط ETA. من الممكن أن تلتقط وحدة التحكم \r وتعامله بشكل مختلف بحيث يتم استبدال السطر الأخير. يجب أن تشاهد الآن سطرًا جديدًا في كل مرة يتم فيها تحديث ETA. فقط مؤقتا لاستبعاد ذلك. تم إنشاء Windows.zip الجديد وتمريره هنا .

fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "", header = FALSE)
Log file:  C:\Users\hughp\AppData\Local\Temp\RtmpcVjZ1f/fread.out 
Input contains no \n. Taking this to be a filename to open
Read 5%. ETA 00:00
Read 8%. ETA 00:00
Read 11%. ETA 00:00
Read 15%. ETA 00:00
Read 18%. ETA 00:00
Read 21%. ETA 00:00
Read 25%. ETA 00:00
Read 28%. ETA 00:00
Read 31%. ETA 00:00
Read 35%. ETA 00:00
Read 38%. ETA 00:00
Read 41%. ETA 00:00
Read 45%. ETA 00:00
Read 48%. ETA 00:00
Read 51%. ETA 00:00
Read 55%. ETA 00:00
Warning: stack imbalance in '$', 30 then 31
Warning: stack imbalance in '$', 17 then 16
Read 58%. ETA 00:00
Read 61%. ETA 00:00
Read 65%. ETA 00:00
Read 68%. ETA 00:00
Read 71%. ETA 00:00
Read 75%. ETA 00:00
Read 78%. ETA 00:00
Read 81%. ETA 00:00
Read 85%. ETA 00:00
Read 88%. ETA 00:00
Read 91%. ETA 00:00
Read 95%. ETA 00:00
Read 98%. ETA 00:00
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapped ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 1A51  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 1A51
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:02.894 wall clock time
[12] Finalizing the datatable
  Type counts:
         1 : bool8     '1'
         1 : int32     '5'
         2 : string    'A'
=============================
   0.001s (  0%) Memory map 0.341GB file
   0.003s (  0%) sep=',' ncol=4 and header detection
   0.000s (  0%) Column type detection using 10027 sample rows
   0.316s ( 11%) Allocation of 25164895 rows x 4 cols (0.469GB) of which 22885380 ( 91%) rows used
   2.574s ( 89%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.004s (  0%) Finding first non-embedded \n after each jump
   +    0.284s ( 10%) Parse to row-major thread buffers (grown 0 times)
   +    1.450s ( 50%) Transpose
   +    0.837s ( 29%) Waiting
   0.953s ( 33%) Rereading 1 columns due to out-of-sample type exceptions
   2.894s        Total
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
                V1        V2      V3 V4
       1: Goulburn 110018063    3499 NA
       2:       NA 110018064     812 NA
       3:       NA 110018065    2158 NA
       4:       NA 110019999     402 NA
       5:       NA 110028068      10 NA
      ---                              
22885376:       NA 997999799       0 NA
22885377:       NA 998999899      64 NA
22885378:       NA 994999499      34 NA
22885379:       NA 0&&&&&&&&  250796 NA
22885380:       NA 0@@@@@@@@ 7305367 NA
Warning messages:
1: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
  Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
2: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
  Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>

لمعلوماتك: لم أتمكن من إعادة إنتاج خطأ عدم توازن المكدس هذا على جهاز Windows مختلف مع إصدار أقدم قليلاً من RStudio.

في هذه الحالة ، يبدو أن الوقت قد حان لطلب دعم RStudio كما اقترحت ، ثم من فضلك. لقد ألقيت نظرة على كود fread مرة أخرى ولم أفكر في جانبي. يرجى إخبارهم برقمي إصدار RStudio. هذا لا يعني بالضرورة أنه RStudio ، فقد يكون خطأ في جانب data.table الذي يحدث فقط في إصدار واحد من RStudio. لكن من الغريب أنه يبدو مرتبطًا بإخراج وحدة التحكم وهذا شيء مختلف ومخصص لـ RStudio. لقد بحثت عن "RStudio stack imabalance" ولكن ظهرت الكثير من المشكلات حول أخطاء الحزمة ، وليس RStudio في حد ذاته. مشكلة صعبة البحث عنها. دعنا نبقي القضية مفتوحة هنا ونرى ماذا يقولون.

أشك في أن المحاولة الأخيرة ستساعد ، ولكن للتأكد من اكتمالها ، يرجى المحاولة هنا . ربما يقوم مترجم MinGW الذي يتم استخدامه على Windows بعمل شيء غريب مع هذين الأمرين. واحد منهم هو ثابت 0 والذي ربما يتم تحسينه بعيدًا ثم يتسبب في اختلال توازن المكدس بطريقة ما.

ومع ذلك ، فإن رسالة عدم توازن المكدس هذه تأتي من Eval.c: 491 في R نفسها. يجب أن تقوم بعض سلاسل الرسائل بتشغيل هذا السطر ولكني لا أعتقد أنه fread أو data.table . يتم استدعاء هذا check_stack_balance() فقط من 5 أماكن في R الداخلية:
في names.c بنهاية do_internal()
في objects.c ، مرتين في applyMethod()
في eval.c ، مرتين في eval()
لا أرى كيف يمكن الوصول إلى أي من هؤلاء بينما fread.c موجود في القسم الموازي. نقطة الدخول الوحيدة التي يتم استدعاؤها هي REprintf ولا أرى كيف يمكن أن يصل ذلك إلى check_stack_balance() . كل ما يمكنني التفكير فيه حاليًا هو أن RStudio لديه مؤشر ترابط يقوم بشيء ما في الخلفية والذي ربما يتفاعل مع إخراج وحدة التحكم ، ربما بشكل مختلف على Windows.
أخيرًا ، من أجل الاكتمال ، يبدو أن استخدام REprintf هو الطريقة الصحيحة للذهاب حيث تستخدم القاعدة R ذلك (بدلاً من Rprintf) في مقياس التقدم في libcurl.c: 354 و internet.c: 409 . إنه لأمر مخز أن شريط تقدم R على المستوى C غير متوفر في واجهة برمجة تطبيقات R (يبدو أنه يتم تنفيذه مرتين في R على المستوى C أيضًا).

mattdowle ، هل سيكون هذا مفيدًا؟ https://github.com/r-lib/progress

aader نعم - شكرا! يحتوي مصدره على هذا التعليق :
// In R Studio we should print to stdout, because printing a \r
// to stderr is buggy (reported)
لكنني قمت بالفعل بإزالة \r ولا يزال عدم توازن المكدس يحدث. أتساءل أين تم الإبلاغ عنها.

ربما هذا؟

https://support.rstudio.com/hc/en-us/community/posts/203136268-Carriage-return-does-not-work-on-stderr-

البناء الأخير أيضًا لم يعمل:

تم الإبلاغ عنه على https://community.rstudio.com/t/stack-imbalance-possably-in-stderr/3009

السؤال في الوقت المناسب على R-devel: [Rd] هل Rprintf و REprintf مؤشر ترابط آمن؟

Upshot "Rprintf و REprintf ليست آمنة مع مؤشر ترابط."

يويكس!

شكرًا جميعًا على الروابط و Hugh لإثارة المشكلة مع RStudio.

data.table::fwrite() و data.table::fread() على علم بأن Rprintf و REprintf غير آمنين ، لذلك بالنسبة لمقاييس التقدم الخاصة بهم ، فإنهم يستدعونها فقط من السلسلة الرئيسية. لا يقتصر الأمر على استدعاء خيطين من خيوط data.table نقطة دخول R في نفس الوقت فحسب ، بل يستدعيها مؤشر الترابط الرئيسي فقط أيضًا ، وهذه هي نقطة دخول R الوحيدة التي دعا إليها أي من سلاسل الرسائل في أي وقت خلال قسم مواز. ومع ذلك ، فإن Rprintf يستدعي R_CheckUserInterrupt كل 100 طباعة. أعتقد أن هذا هو الجزء الذي قد لا يكون آمنًا حتى من مجرد موضوع رئيسي. هذا هو سبب استخدام REprintf لأن ذلك لا يستدعي R_CheckUserInterrupt . تستخدم الأجزاء الداخلية R REprintf لمقاييس التقدم ، لذا فإن التبديل إلى REprintf للتوافق مع Core R أمر منطقي ؛ أي أن هذا الاختيار لا علاقة له بـ stderr vs stdout ، في حد ذاته.

kevinushey هل تمانع في إلقاء نظرة على هذا الموضوع والسماح لي بمعرفة أي شيء آخر يمكنني تجربته؟ هل يمكن أن يكون مرتبطًا بـ RStudio ، بطريقة أو بأخرى ، بخيط في الخلفية؟ إذا كان RStudio يحتوي على مؤشر ترابط في الخلفية ، فقد يكون من الممكن استدعاء Rprintf / REprintf من خيطين في نفس الوقت. ولكن ، إذا كان هذا هو الحال ، لكنا قد شهدنا العديد من المشاكل قبل الآن. لذلك يبدو هذا غير محتمل. ربما يحل RStudio محل عمليات رد النداء ptr_* المذكورة في القسم 8.1.2 من R-exts - تلك المتعلقة بإخراج وحدة التحكم والتفاعل. ومع ذلك ، يبدأ هذا القسم بـ "For unix-alikes" ، لذلك لا أعرف كيف يأتي Windows. ربما تكون مشكلات خيوط المعالجة في القسم

سأخرج حتى أوائل ديسمبر ، لذلك للأسف لن تسنح لي الفرصة لإلقاء نظرة حتى ذلك الحين. ومع ذلك ، يقوم RStudio بتشغيل كل شيء تقريبًا على الخيط الرئيسي باستخدام حلقة حدث R ؛ الاستثناءات الوحيدة هي على سبيل المثال فهرسة الملفات على مستوى المشروع ولا تلمس خيوط الخلفية هذه عادةً أي واجهات برمجة تطبيقات R.

يتولى RStudio عمليات الاسترجاعات المختلفة ptr_* للتعامل مع مدخلات ومخرجات وحدة التحكم ؛ لا أستطيع أن أفكر على الفور في الكيفية التي قد يكونون بها سببًا هنا ، لكنني سأحاول إلقاء نظرة أعمق عندما أعود.

حسنًا ، يرجى تجربة هذا هنا . قبل ذلك ، كان يتم تحديث حالة التقدم كل 2٪. في حالتك ، يستغرق ملفك أقل من 3 ثوانٍ فقط ، لذا كان ذلك بمثابة تحديث تقدم جديد لوحدة تحكم RStudio كل 0.06 ثانية. ربما كان هذا كثيرًا على RStudio. لذا فإن هذه المحاولة تطبع شريطًا. لا يستخدم \r على الإطلاق. يجب أن يكون هذا أفضل للتقارير وملفات السجلات على أي حال حيث يمكن أن يملأ \r الإخراج.

نظرًا لأن توقيتك الذي يبلغ 3 ثوانٍ سريع جدًا ، فقد قمت بتقليل شريط التقدم ليبدأ عند ثانية واحدة إذا كان هناك وقت متوقع لمدة ثانية واحدة من هناك. وإلا فلن يتم عرضه على الإطلاق ويعمل لملفك فقط لأنه لم يتم عرضه. بعد الاختبار ، سأزيد إلى ما لديه fwrite ؛ على سبيل المثال ، ابدأ في 2 ثانية إذا كان وقت الوصول المقدر 2 ثانية من هناك.

مرحبًا ،mattdowle. قد يكون تعليقي الأخير في # 2503 متعلقًا بهذه المشكلة أيضًا.

تبدو جيدا! لا توجد تحذيرات (بعد 5 أشواط). قم أولاً بتشغيل أدناه (لاحظ أن المسافات البادئة تبدو مختلفة في الناتج الفعلي):

stopifnot(!requireNamespace("data.table", quietly = TRUE))
install.packages("https://ci.appveyor.com/api/buildjobs/1o9s06o31v8i3ljr/artifacts/data.table_1.10.5.zip",
                 repos = NULL)
# Installing package into ‘C:/Users/hughp/Documents/R/win-library/3.4’
# (as ‘lib’ is unspecified)
# trying URL 'https://ci.appveyor.com/api/buildjobs/1o9s06o31v8i3ljr/artifacts/data.table_1.10.5.zip'
# Content type 'application/octet-stream' length 1557423 bytes (1.5 MB)
# downloaded 1.5 MB
# 
# package ‘data.table’ successfully unpacked and MD5 sums checked

library(data.table)
# data.table 1.10.5 IN DEVELOPMENT built 2017-11-30 00:21:00 UTC; appveyor
# The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
# Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
# Release notes, videos and slides: http://r-datatable.com
setwd("~/ABS-data/inbox/SA2-by-DJZ-2011/")
fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "", header = FALSE)
# Input contains no \n. Taking this to be a filename to open
# [01] Check arguments
# Using 12 threads (omp_get_max_threads()=12, nth=12)
# NAstrings = [<<>>]
# None of the NAstrings look like numbers.
# show progress = 1
# 0/1 column will be read as boolean
# [02] Opening the file
# Opening file SA2-by-DJZ-2011.csv
# File opened, size = 349.4MB (366418725 bytes).
# Memory mapped ok
# [03] Detect and skip BOM
# [04] Arrange mmap to be \0 terminated
# \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
# [05] Skipping initial rows if needed
# Positioned on line 1 starting: <<Australian Bureau of Statistic>>
#   [06] Detect separator, quoting rule, and ncolumns
# Detecting sep ...
# sep=','  with 89 lines of 4 fields using quote rule 0
# Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
#   Quote rule picked = 0
# fill=false and the most number of columns found is 4
# [07] Detect column types, good nrow estimate and whether first row is column names
# 'header' changed by user from 'auto' to false
# Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
# Type codes (jump 000)    : 1551  Quote rule 0
# Type codes (jump 100)    : 1A51  Quote rule 0
# =====
#   Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
# Bytes from first data row on line 12 to the end of last row: 366418143
# Line length: mean=16.02 sd=0.21 min=16 max=29
# Estimated number of rows: 366418143 / 16.02 = 22877178
# Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
# =====
#   [08] Assign column names
# [09] Apply user overrides on column types
# After 0 type and 0 drop user overrides : 1A51
# [10] Allocate memory for the datatable
# Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
# [11] Read the data
# jumps=[0..360), chunk_size=1017828, total_size=366418143
# jumps=[0..360), chunk_size=1017828, total_size=366418143
# |--------------------------------------------------|
#   |==================================================|
#   Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:02.280 wall clock time
# [12] Finalizing the datatable
# Type counts:
#   1 : bool8     '1'
# 1 : int32     '5'
# 2 : string    'A'
# =============================
#   0.005s (  0%) Memory map 0.341GB file
# 0.037s (  2%) sep=',' ncol=4 and header detection
# 0.000s (  0%) Column type detection using 10027 sample rows
# 0.321s ( 14%) Allocation of 25164895 rows x 4 cols (0.469GB) of which 22885380 ( 91%) rows used
# 1.917s ( 84%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
# =    0.011s (  0%) Finding first non-embedded \n after each jump
# +    0.560s ( 25%) Parse to row-major thread buffers (grown 0 times)
# +    0.488s ( 21%) Transpose
# +    0.858s ( 38%) Waiting
# 0.999s ( 44%) Rereading 1 columns due to out-of-sample type exceptions
# 2.280s        Total
# Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
# V1        V2      V3 V4
# 1: Goulburn 110018063    3499 NA
# 2:       NA 110018064     812 NA
# 3:       NA 110018065    2158 NA
# 4:       NA 110019999     402 NA
# 5:       NA 110028068      10 NA
# ---                              
#   22885376:       NA 997999799       0 NA
# 22885377:       NA 998999899      64 NA
# 22885378:       NA 994999499      34 NA
# 22885379:       NA 0&&&&&&&&  250796 NA
# 22885380:       NA 0@@@@@@@@ 7305367 NA
# Warning messages:
#   1: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
#                 Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
#               2: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
#               Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>

تضمين التغريدة أعتقد أن هذا يعد فوزًا. سأقوم بالترتيب والدمج والمضي قدمًا. شكرا جزيلا لك على الاختبار.

aadler نعم اتفقنا على أن تعليقك في الإصدار رقم 2503 يبدو هو نفسه. هل يمكنك اختبار الأحدث من dev أيضًا من فضلك وتأكيد أنه تم إصلاحه الآن؟ نأمل أن تكون المشكلة مع as.IDate التي وجدتها ناتجة بالفعل عن عدم توازن المكدس السابق.

ليس جيد :(

> library(data.table)
data.table 1.10.5 IN DEVELOPMENT built 2017-11-30 00:21:00 UTC; appveyor
  The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
  Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
  Release notes, videos and slides: http://r-datatable.com
> sessionInfo()
R version 3.4.2 beta (2017-09-17 r73296)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows Server >= 2012 x64 (build 9200)

Matrix products: default

locale:
[1] LC_COLLATE=English_United States.1252  LC_CTYPE=English_United States.1252    LC_MONETARY=English_United States.1252
[4] LC_NUMERIC=C                           LC_TIME=English_United States.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] data.table_1.10.5

loaded via a namespace (and not attached):
[1] compiler_3.4.2 tools_3.4.2   
> DT <- fread('2017-11-22_1999_Performance.csv', header = TRUE, colClasses = CLS, select = SEL, key = c('LoanID', 'Month'), verbose = TRUE)
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 40 threads (omp_get_max_threads()=40, nth=40)
  NAstrings = [<<NA>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file 2017-11-22_1999_Performance.csv
  File opened, size = 6.355GB (6823372783 bytes).
  Memory mapped ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 100 lines of 37 fields using quote rule 0
  Detected 37 columns on line 1. This line is either column names or first data row. Line starts as: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 37
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to true
  Number of sampling jump points = 101 because (6823372781 bytes from row 1 to eof) / (2 * 12905 jump0size) == 264369
  Type codes (jump 000)    : 51AA7155A15A7111111111111771111177715  Quote rule 0
  Type codes (jump 001)    : 51AA7155A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 008)    : 51AA7555A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 009)    : 51AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 042)    : 55AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 064)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  Type codes (jump 100)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  =====
  Sampled 10049 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 1 to the end of last row: 6823372781
  Line length: mean=126.15 sd=8.30 min=100 max=359
  Estimated number of rows: 6823372781 / 126.15 = 54088821
  Initial alloc = 62279495 rows (54088821 + 15%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 4 type and 23 drop user overrides : 00AA700000000000000000070775555077750
[10] Allocate memory for the datatable
  Allocating 14 column slots (37 - 23 dropped) with 62279495 rows
[11] Read the data
  jumps=[0..6520), chunk_size=1046529, total_size=6823372422
|--------------------------------------------------|
|=======Warning: stack imbalance in '$', 27 then 26
===Warning: stack imbalance in '$', 26 then 27
================Error in fread("2017-11-22_1999_Performance.csv", header = TRUE, colClasses = CLS,  : 
  unprotect_ptr: pointer not found

aadler شكرا لهذا التقرير. مررت بـ freadR وقمت بترجمة الحماية. هناك فرصة بنسبة 30٪ لأنك في حالتك تتخطى الأنواع وكان هناك عدد قليل جدًا من الحماية في هذا الجزء من الكود. يرجى المحاولة مرة أخرى باستخدام هذا البناء .

aadler إذا لم تكن قد جربت الإصدار الأخير حتى الآن ، فيرجى الانتقال مباشرة إلى تجربة هذا الإصدار. أيضًا ، إذا كان من الممكن الحصول على نسخة من ملفك لي ، فقد أتمكن من تجربة نفسي على Windows RStudio.

:(

> library(data.table)
data.table 1.10.5 IN DEVELOPMENT built 2017-12-01 01:54:04 UTC; appveyor
  The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
  Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
  Release notes, videos and slides: http://r-datatable.com
> sessionInfo()
R version 3.4.2 beta (2017-09-17 r73296)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows Server >= 2012 x64 (build 9200)

Matrix products: default

locale:
[1] LC_COLLATE=English_United States.1252  LC_CTYPE=English_United States.1252    LC_MONETARY=English_United States.1252
[4] LC_NUMERIC=C                           LC_TIME=English_United States.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] data.table_1.10.5

loaded via a namespace (and not attached):
[1] compiler_3.4.2 tools_3.4.2   
> ColCLASS <- c(rep('integer', 2L), 'character', 'Date', 'numeric',
+               rep('integer', 3L), rep('character', 2L),
+               'integer', 'Date', rep('numeric', 2L), 'Date',
+               rep('numeric', 12L), rep('integer', 5),
+               rep('numeric', 3L), 'integer', 'character')
> SELCOL <- c(WHATEVER)
> DT <- fread('LargeFile.csv', header = TRUE, colClasses = ColCLASS, select = SELCOL, key = c('LoanID', 'Month'), verbose = TRUE)
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 40 threads (omp_get_max_threads()=40, nth=40)
  NAstrings = [<<NA>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file LargeFile.csv
  File opened, size = 6.355GB (6823372783 bytes).
  Memory mapped ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 100 lines of 37 fields using quote rule 0
  Detected 37 columns on line 1. This line is either column names or first data row. Line starts as: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 37
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to true
  Number of sampling jump points = 101 because (6823372781 bytes from row 1 to eof) / (2 * 12905 jump0size) == 264369
  Type codes (jump 000)    : 51AA7155A15A7111111111111771111177715  Quote rule 0
  Type codes (jump 001)    : 51AA7155A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 008)    : 51AA7555A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 009)    : 51AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 042)    : 55AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 064)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  Type codes (jump 100)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  =====
  Sampled 10049 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 1 to the end of last row: 6823372781
  Line length: mean=126.15 sd=8.30 min=100 max=359
  Estimated number of rows: 6823372781 / 126.15 = 54088821
  Initial alloc = 62279495 rows (54088821 + 15%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 4 type and 23 drop user overrides : 00AA700000000000000000070775555077750
[10] Allocate memory for the datatable
  Allocating 14 column slots (37 - 23 dropped) with 62279495 rows
[11] Read the data
  jumps=[0..6520), chunk_size=1046529, total_size=6823372422
|--------------------------------------------------|
|Error in fread("LargeFile.csv", header = TRUE, colClasses = ColCLASS,  : 
  unprotect_ptr: pointer not found

بفضل aadler على البريد الإلكتروني ، يمكنني الآن إعادة الإنتاج. R 3.4.2 ، أحدث RStudio 1.1.383 و Windows 10 Pro 10.0.16299 Build 16299.

أرى سلوكًا غريبًا في RStudio ، مسجل هنا:
https://www.youtube.com/watch؟v=tl2x2vmZxMU
يبدو أن RStudio يولد GCs فقط عن طريق الكتابة. لماذا هذا وهل هناك طريقة لإيقاف تشغيله؟ قد يكون ذلك عندما يقوم fread() بطباعة شريط التقدم الخاص به ، فإن حلقة الحدث المنفصلة في RStudio تفكر في أن الإخراج إلى وحدة التحكم هو قيام المستخدم بكتابة واستدعاء R مما يؤدي إلى ظهور GC ويقوم برحلات كل شيء؟ ربما يعرف مستخدمو RStudio هنا ، أن يوجهوني إلى الاتجاه الصحيح ، أو ربما عادkevinushey (لقد قلت في أوائل ديسمبر كيفن ، وهو اليوم الأول اليوم: -))

يمكنني إعادة إنتاج عدم توازن المكدس بشكل موثوق في وحدة تحكم RStudio. باستخدام علامة التبويب RStudio Terminal ، لا يمكنني إعادة إنتاجها على الإطلاق ، حتى مع gcinfo(TRUE) . ومن المثير للاهتمام ، أن GCs تحدث أثناء طباعة شريط التقدم ويبدو ذلك جيدًا ، لأنه جيد في Linux أيضًا. بالنظر إلى السلوك في هذا الفيديو الخاص بوحدة التحكم RStudio ، فقد توصلت إلى استنتاج مفاده أن هذا خطأ في وحدة تحكم RStudio. لم أتمكن من نسخ النص من نافذة RStudio Terminal (تحرير-> النسخ لا يعمل ولا Ctrl-C) لذلك التقطت لقطة شاشة لعلامة التبويب Terminal لإظهار أن GC أثناء شريط التقدم على ما يرام. أتوقع أن يكون الأمر على ما يرام لأن الخيط الرئيسي فقط هو الذي يستدعي REprintf والخيوط الأخرى لا تستدعي أي R API على الإطلاق.

يعمل بشكل جيد في RStudio Terminal:

لاحظ أن هناك GC أثناء طباعة شريط التقدم في المرة الأولى وهذا يعمل بشكل جيد في RStudio Terminal. تتم طباعة شريط التقدم مرة ثانية نظرًا لوجود استثناء لنوع خارج العينة في ملف الاختبار هذا والذي يؤدي إلى إعادة قراءة تلقائية لتلك الأعمدة فقط.

ولكن في وحدة تحكم RStudio ، يوجد إما stack imbalance أو unprotect_ptr: pointer not found :

R version 3.4.2 (2017-09-28) -- "Short Summer"
> gcinfo(TRUE)
[1] FALSE
Garbage collection 22 = 16+3+3 (level 0) ... 
25.5 Mbytes of cons cells used (80%)
6.6 Mbytes of vectors used (66%)
Garbage collection 23 = 16+4+3 (level 1) ... 
24.9 Mbytes of cons cells used (79%)
6.5 Mbytes of vectors used (64%)
Garbage collection 24 = 17+4+3 (level 0) ... 
25.1 Mbytes of cons cells used (79%)
6.5 Mbytes of vectors used (64%)
Garbage collection 25 = 18+4+3 (level 0) ... 
25.1 Mbytes of cons cells used (79%)
6.5 Mbytes of vectors used (64%)
Garbage collection 26 = 19+4+3 (level 0) ... 
25.1 Mbytes of cons cells used (79%)
6.5 Mbytes of vectors used (65%)
Garbage collection 27 = 20+4+3 (level 0) ... 
25.2 Mbytes of cons cells used (80%)
6.5 Mbytes of vectors used (65%)
Garbage collection 28 = 20+5+3 (level 1) ... 
25.1 Mbytes of cons cells used (79%)
6.5 Mbytes of vectors used (65%)
Garbage collection 29 = 21+5+3 (level 0) ... 
25.1 Mbytes of cons cells used (79%)
6.5 Mbytes of vectors used (65%)
Garbage collection 30 = 22+5+3 (level 0) ... 
25.2 Mbytes of cons cells used (80%)
6.5 Mbytes of vectors used (65%)
Garbage collection 31 = 23+5+3 (level 0) ... 
25.2 Mbytes of cons cells used (80%)
6.6 Mbytes of vectors used (66%)
Garbage collection 32 = 24+5+3 (level 0) ... 
25.3 Mbytes of cons cells used (80%)
6.6 Mbytes of vectors used (66%)
Garbage collection 33 = 25+5+3 (level 0) ... 
25.4 Mbytes of cons cells used (80%)
6.7 Mbytes of vectors used (66%)
Garbage collection 34 = 25+5+4 (level 2) ... 
24.6 Mbytes of cons cells used (61%)
6.4 Mbytes of vectors used (50%)
Garbage collection 35 = 26+5+4 (level 0) ... 
25.0 Mbytes of cons cells used (62%)
6.5 Mbytes of vectors used (52%)
> require(data.table)
Loading required package: data.table
Garbage collection 36 = 27+5+4 (level 0) ... 
27.2 Mbytes of cons cells used (68%)
7.1 Mbytes of vectors used (56%)
data.table 1.10.5 IN DEVELOPMENT built 2017-12-02 01:04:34 UTC; appveyor
  The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
  Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
  Release notes, videos and slides: http://r-datatable.com
Garbage collection 37 = 28+5+4 (level 0) ... 
27.7 Mbytes of cons cells used (69%)
7.3 Mbytes of vectors used (58%)
Garbage collection 38 = 29+5+4 (level 0) ... 
28.0 Mbytes of cons cells used (70%)
7.4 Mbytes of vectors used (58%)
Garbage collection 39 = 30+5+4 (level 0) ... 
28.1 Mbytes of cons cells used (70%)
7.4 Mbytes of vectors used (59%)
Garbage collection 40 = 31+5+4 (level 0) ... 
28.2 Mbytes of cons cells used (70%)
7.5 Mbytes of vectors used (59%)
Garbage collection 41 = 32+5+4 (level 0) ... 
28.4 Mbytes of cons cells used (71%)
7.5 Mbytes of vectors used (59%)
> DT = fread("/Users/pasha/Downloads/LargeFile.csv")
Garbage collection 42 = 32+5+5 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
7.1 Mbytes of vectors used (2%)
Garbage collection 43 = 32+5+6 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
244.7 Mbytes of vectors used (42%)
Garbage collection 44 = 32+5+7 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
482.3 Mbytes of vectors used (42%)
Garbage collection 45 = 32+5+8 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
957.4 Mbytes of vectors used (56%)
Garbage collection 46 = 32+5+9 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
1432.6 Mbytes of vectors used (63%)
Garbage collection 47 = 32+5+10 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
2145.3 Mbytes of vectors used (75%)
Garbage collection 48 = 32+5+11 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
2620.4 Mbytes of vectors used (71%)
Garbage collection 49 = 32+5+12 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
3570.8 Mbytes of vectors used (78%)
Garbage collection 50 = 32+5+13 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
4283.5 Mbytes of vectors used (75%)
Garbage collection 51 = 32+5+14 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
5709.0 Mbytes of vectors used (77%)
Garbage collection 52 = 32+5+15 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
7372.0 Mbytes of vectors used (81%)
Garbage collection 53 = 32+5+16 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
8797.5 Mbytes of vectors used (79%)
Garbage collection 54 = 32+5+17 (level 2) ... 
27.4 Mbytes of cons cells used (54%)
10935.7 Mbytes of vectors used (80%)
|--------------------------------------------------|
|=====Error in fread("LargeFile.csv") : 
  unprotect_ptr: pointer not found
> 

showProgress=FALSE يحلها بشكل موثوق في وحدة تحكم RStudio. لإعادة الإنتاج ، يجب أن يكون أول تشغيل في وحدة تحكم RStudio جديدة مع showProgress=TRUE (أي افتراضي). يبدو مرتبطًا بما إذا كان هناك GC أثناء مقياس التقدم ؛ هناك في الجولة الأولى في جلسة جديدة. يجب أن يكون ملفًا كبيرًا فقط حتى يتم عرض مقياس التقدم. لا علاقة لإعادة القراءة أو الوسيطات التي تم تمريرها إلى fread . إذا كان التشغيل الأول في وحدة تحكم RStudio جديدة هو showProgress=FALSE لجعلها تعمل ، فإن هذا التشغيل يوسع كومة R ثم تشغيل لاحق في نفس الجلسة مع showProgress=TRUE ثم يعمل أيضًا. ولكن فقط لأنه لا يوجد عندئذٍ GC أثناء مقياس التقدم بسبب التشغيل الأول الذي يوسع الكومة بالفعل.
لماذا يعتبر GC في مؤشر ترابط رئيسي أثناء مقياس التقدم على ما يرام في Linux وفي Windows RStudio Terminal ولكن ليس في RStudio Console هو السؤال المعلق.

حسنًا ، هذا يعمل على إصلاحه. كانت المشكلة على جانب data.table وليس RStudio. يعمل الآن بالنسبة لي بشكل موثوق في RStudio Console على Windows. كانت مشكلة يمكن أن تحدث على Linux و Max أيضًا ، إنها فقط لأن أنماط الذاكرة لم تكن تؤدي إلى ذلك. تحتوي الخيوط الأخرى على نقطة دخول إلى R (عند دفع مخازنهم المؤقتة بأعمدة سلسلة) والتي يمكن أن تحدث في نفس الوقت مع تقدم طباعة الخيط الرئيسي باستخدام REprintf . لهذا السبب حدث ذلك فقط في الجولة الأولى في جلسة جديدة. في الجولة الثانية فصاعدًا ، تمت رؤية جميع السلاسل الموجودة في الملف من قبل ، لذا كانت عمليات البحث عن ذاكرة التخزين المؤقت تصل إلى (مؤشر الترابط الآمن) ولا يتم التخصيص (ليس مؤشر الترابط الآمن).

لذا ، aadler و HughParsonage ، يرجى تجربة هذا . فرصة 95٪ أن هذا يعمل الآن!

لا تحذير ، لست متأكدًا مما إذا كنت تبحث عن أي شيء آخر:

> gcinfo(TRUE)
[1] FALSE
> fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "", header = FALSE)
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 12 threads (omp_get_max_threads()=12, nth=12)
  NAstrings = [<<>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file SA2-by-DJZ-2011.csv
  File opened, size = 349.4MB (366418725 bytes).
  Memory mapped ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Australian Bureau of Statistic>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 89 lines of 4 fields using quote rule 0
  Detected 4 columns on line 12. This line is either column names or first data row. Line starts as: <<"Goulburn","110018063",3499,>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 4
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to false
  Number of sampling jump points = 101 because (366418375 bytes from row 1 to eof) / (2 * 1457 jump0size) == 125744
  Type codes (jump 000)    : 1551  Quote rule 0
  Type codes (jump 100)    : 1A51  Quote rule 0
  =====
  Sampled 10027 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 12 to the end of last row: 366418143
  Line length: mean=16.02 sd=0.21 min=16 max=29
  Estimated number of rows: 366418143 / 16.02 = 22877178
  Initial alloc = 25164895 rows (22877178 + 9%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 0 type and 0 drop user overrides : 1A51
[10] Allocate memory for the datatable
  Allocating 4 column slots (4 - 0 dropped) with 25164895 rows
Garbage collection 53 = 36+5+12 (level 2) ... 
30.3 Mbytes of cons cells used (60%)
7.9 Mbytes of vectors used (1%)
[11] Read the data
  jumps=[0..360), chunk_size=1017828, total_size=366418143
|--------------------------------------------------|
|==================================================|
Garbage collection 54 = 37+5+12 (level 0) ... 
30.8 Mbytes of cons cells used (61%)
566.6 Mbytes of vectors used (74%)
Garbage collection 55 = 37+6+12 (level 1) ... 
30.8 Mbytes of cons cells used (61%)
549.2 Mbytes of vectors used (72%)
  jumps=[0..360), chunk_size=1017828, total_size=366418143
|--------------------------------------------------|
|==================================================|
Read 22885380 rows x 4 columns from 349.4MB (366418725 bytes) file in 00:02.626 wall clock time
[12] Finalizing the datatable
  Type counts:
         1 : bool8     '1'
         1 : int32     '5'
         2 : string    'A'
=============================
   0.002s (  0%) Memory map 0.341GB file
   0.005s (  0%) sep=',' ncol=4 and header detection
   0.000s (  0%) Column type detection using 10027 sample rows
   0.469s ( 18%) Allocation of 25164895 rows x 4 cols (0.469GB) of which 22885380 ( 91%) rows used
   2.150s ( 82%) Reading 360 chunks of 0.971MB (63547 rows) using 12 threads
   =    0.103s (  4%) Finding first non-embedded \n after each jump
   +    0.230s (  9%) Parse to row-major thread buffers (grown 0 times)
   +    0.718s ( 27%) Transpose
   +    1.099s ( 42%) Waiting
   0.745s ( 28%) Rereading 1 columns due to out-of-sample type exceptions
   2.626s        Total
Column 1 ("") bumped from 'bool8' to 'string' due to <<"Goulburn">> on row 0
Garbage collection 56 = 37+6+13 (level 2) ... 
31.1 Mbytes of cons cells used (62%)
531.9 Mbytes of vectors used (70%)
Garbage collection 57 = 38+6+13 (level 0) ... 
31.1 Mbytes of cons cells used (62%)
532.0 Mbytes of vectors used (70%)
                V1        V2      V3 V4
       1: Goulburn 110018063    3499 NA
       2:       NA 110018064     812 NA
       3:       NA 110018065    2158 NA
       4:       NA 110019999     402 NA
       5:       NA 110028068      10 NA
      ---                              
22885376:       NA 997999799       0 NA
22885377:       NA 998999899      64 NA
22885378:       NA 994999499      34 NA
22885379:       NA 0&&&&&&&&  250796 NA
22885380:       NA 0@@@@@@@@ 7305367 NA
Warning messages:
1: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
  Starting data input on line 12 <<"Goulburn","110018063",3499,>> with 4 fields and discarding line 11 <<"Main Statistical Area Structu>> before it because it has a different number of fields (3).
2: In fread("SA2-by-DJZ-2011.csv", verbose = TRUE, na.strings = "",  :
  Found the last consistent line but text exists afterwards. Consider fill=TRUE and/or blank.lines.skip=TRUE. First 200 characters of discarded line: <<"Dataset: 2011 Census of Population and Housing">>

شكرا هيو. نعم هذا تشغيل نظيف ، بافتراض أنه كان في جلسة وحدة تحكم RStudio جديدة. لا توجد علامة على عدم توازن المكدس أو رسائل "unotect_ptr: المؤشر غير موجود" ، ومقياس التقدم يعمل بشكل صحيح (مرتين في هذه الحالة لأن هناك إعادة قراءة). الآن فقط aadler للتأكيد.

نجاح.

أول تشغيل ، نسخة جديدة من RStudio.

> library(data.table)
data.table 1.10.5 IN DEVELOPMENT built 2017-12-02 12:05:42 UTC; appveyor
  The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
  Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
  Release notes, videos and slides: http://r-datatable.com
> sessionInfo()
R version 3.4.2 beta (2017-09-17 r73296)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows Server >= 2012 x64 (build 9200)

Matrix products: default

locale:
[1] LC_COLLATE=English_United States.1252  LC_CTYPE=English_United States.1252    LC_MONETARY=English_United States.1252
[4] LC_NUMERIC=C                           LC_TIME=English_United States.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] data.table_1.10.5

loaded via a namespace (and not attached):
[1] compiler_3.4.2 tools_3.4.2   
> DT <- fread('LargeFile.csv', colClasses = colCLASS, select = colSEL, header = TRUE, key = c('LoanID', 'Month'), verbose = TRUE)
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 40 threads (omp_get_max_threads()=40, nth=40)
  NAstrings = [<<NA>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file LargeFile.csv
  File opened, size = 6.355GB (6823372783 bytes).
  Memory mapped ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 100 lines of 37 fields using quote rule 0
  Detected 37 columns on line 1. This line is either column names or first data row. Line starts as: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 37
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to true
  Number of sampling jump points = 101 because (6823372781 bytes from row 1 to eof) / (2 * 12905 jump0size) == 264369
  Type codes (jump 000)    : 51AA7155A15A7111111111111771111177715  Quote rule 0
  Type codes (jump 001)    : 51AA7155A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 008)    : 51AA7555A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 009)    : 51AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 042)    : 55AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 064)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  Type codes (jump 100)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  =====
  Sampled 10049 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 1 to the end of last row: 6823372781
  Line length: mean=126.15 sd=8.30 min=100 max=359
  Estimated number of rows: 6823372781 / 126.15 = 54088821
  Initial alloc = 62279495 rows (54088821 + 15%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 4 type and 23 drop user overrides : 00AA700000000000000000070775555077750
[10] Allocate memory for the datatable
  Allocating 14 column slots (37 - 23 dropped) with 62279495 rows
[11] Read the data
  jumps=[0..6520), chunk_size=1046529, total_size=6823372422
|--------------------------------------------------|
|==================================================|
Read 53945186 rows x 14 columns from 6.355GB (6823372783 bytes) file in 00:25.938 wall clock time
[12] Finalizing the datatable
  Type counts:
        23 : drop      '0'
         5 : int32     '5'
         7 : float64   '7'
         2 : string    'A'
=============================
   0.005s (  0%) Memory map 6.355GB file
   0.025s (  0%) sep=',' ncol=37 and header detection
   0.001s (  0%) Column type detection using 10049 sample rows
   4.681s ( 18%) Allocation of 62279495 rows x 37 cols (5.336GB) of which 53945186 ( 87%) rows used
  21.226s ( 82%) Reading 6520 chunks of 0.998MB (8295 rows) using 40 threads
   =    0.485s (  2%) Finding first non-embedded \n after each jump
   +    1.465s (  6%) Parse to row-major thread buffers (grown 0 times)
   +    9.095s ( 35%) Transpose
   +   10.181s ( 39%) Waiting
   0.000s (  0%) Rereading 0 columns due to out-of-sample type exceptions
  25.938s        Total

أغلق RStudio وأعد فتحه لمنع تنشيط التخزين المؤقت للسلسلة وتشغيله مرة أخرى باستخدام gcinfo(TRUE) . تمت إضافة المكافأة ، اكتمل التحويل إلى IDate (استغرق أكثر من 40 ثانية ، على الرغم من :)).

> colCLASS <- c(rep('integer', 2L), 'character', 'Date', 'numeric',
+               rep('integer', 3L), rep('character', 2L),
+               'integer', 'Date', rep('numeric', 2L), 'Date',
+               rep('numeric', 12L), rep('integer', 5),
+               rep('numeric', 3L), 'integer', 'character')
> library(data.table)
data.table 1.10.5 IN DEVELOPMENT built 2017-12-02 12:05:42 UTC; appveyor
  The fastest way to learn (by data.table authors): https://www.datacamp.com/courses/data-analysis-the-data-table-way
  Documentation: ?data.table, example(data.table) and browseVignettes("data.table")
  Release notes, videos and slides: http://r-datatable.com
> gcinfo(TRUE)
[1] FALSE
> sessionInfo()
R version 3.4.2 beta (2017-09-17 r73296)
Platform: x86_64-w64-mingw32/x64 (64-bit)
Running under: Windows Server >= 2012 x64 (build 9200)

Matrix products: default

locale:
[1] LC_COLLATE=English_United States.1252  LC_CTYPE=English_United States.1252    LC_MONETARY=English_United States.1252
[4] LC_NUMERIC=C                           LC_TIME=English_United States.1252    

attached base packages:
[1] stats     graphics  grDevices utils     datasets  methods   base     

other attached packages:
[1] data.table_1.10.5

loaded via a namespace (and not attached):
[1] compiler_3.4.2 tools_3.4.2   
Garbage collection 46 = 36+5+5 (level 0) ... 
38.6 Mbytes of cons cells used (77%)
11.2 Mbytes of vectors used (71%)
Garbage collection 47 = 37+5+5 (level 0) ... 
38.7 Mbytes of cons cells used (77%)
11.2 Mbytes of vectors used (71%)
Garbage collection 48 = 38+5+5 (level 0) ... 
38.8 Mbytes of cons cells used (77%)
11.2 Mbytes of vectors used (71%)
Garbage collection 49 = 39+5+5 (level 0) ... 
39.0 Mbytes of cons cells used (78%)
11.2 Mbytes of vectors used (71%)
Garbage collection 50 = 40+5+5 (level 0) ... 
39.1 Mbytes of cons cells used (78%)
11.3 Mbytes of vectors used (71%)
Garbage collection 51 = 40+6+5 (level 1) ... 
38.8 Mbytes of cons cells used (77%)
11.3 Mbytes of vectors used (71%)
Garbage collection 52 = 41+6+5 (level 0) ... 
38.9 Mbytes of cons cells used (77%)
11.3 Mbytes of vectors used (71%)
Garbage collection 53 = 42+6+5 (level 0) ... 
41.5 Mbytes of cons cells used (83%)
12.2 Mbytes of vectors used (77%)
Garbage collection 54 = 42+7+5 (level 1) ... 
43.4 Mbytes of cons cells used (86%)
12.8 Mbytes of vectors used (81%)
Garbage collection 55 = 42+7+6 (level 2) ... 
44.7 Mbytes of cons cells used (72%)
13.0 Mbytes of vectors used (67%)
Garbage collection 56 = 43+7+6 (level 0) ... 
46.5 Mbytes of cons cells used (74%)
13.6 Mbytes of vectors used (70%)
Garbage collection 57 = 44+7+6 (level 0) ... 
47.0 Mbytes of cons cells used (75%)
13.8 Mbytes of vectors used (71%)
Garbage collection 58 = 45+7+6 (level 0) ... 
47.4 Mbytes of cons cells used (76%)
13.9 Mbytes of vectors used (71%)
Garbage collection 59 = 46+7+6 (level 0) ... 
47.7 Mbytes of cons cells used (76%)
14.2 Mbytes of vectors used (73%)
Garbage collection 60 = 47+7+6 (level 0) ... 
48.0 Mbytes of cons cells used (77%)
14.2 Mbytes of vectors used (73%)
Garbage collection 61 = 48+7+6 (level 0) ... 
48.1 Mbytes of cons cells used (77%)
14.3 Mbytes of vectors used (73%)
> DT <- fread('LargeFile.csv', header = TRUE, colClasses = colCLASS, select = colSEL, key = c('LoanID', 'Month'), verbose = TRUE)
Input contains no \n. Taking this to be a filename to open
[01] Check arguments
  Using 40 threads (omp_get_max_threads()=40, nth=40)
  NAstrings = [<<NA>>]
  None of the NAstrings look like numbers.
  show progress = 1
  0/1 column will be read as boolean
[02] Opening the file
  Opening file LargeFile.csv
  File opened, size = 6.355GB (6823372783 bytes).
  Memory mapped ok
[03] Detect and skip BOM
[04] Arrange mmap to be \0 terminated
  \n has been found in the data so any mixture of line endings is allowed other than \r-only line endings. This is common and ideal.
[05] Skipping initial rows if needed
  Positioned on line 1 starting: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
[06] Detect separator, quoting rule, and ncolumns
  Detecting sep ...
  sep=','  with 100 lines of 37 fields using quote rule 0
  Detected 37 columns on line 1. This line is either column names or first data row. Line starts as: <<Orig_Year,Orig_Qtr,LoanID,Mont>>
  Quote rule picked = 0
  fill=false and the most number of columns found is 37
[07] Detect column types, good nrow estimate and whether first row is column names
  'header' changed by user from 'auto' to true
  Number of sampling jump points = 101 because (6823372781 bytes from row 1 to eof) / (2 * 12905 jump0size) == 264369
  Type codes (jump 000)    : 51AA7155A15A7111111111111771111177715  Quote rule 0
  Type codes (jump 001)    : 51AA7155A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 008)    : 51AA7555A15A711111111111177111117771A  Quote rule 0
  Type codes (jump 009)    : 51AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 042)    : 55AA7555AA5A71A155555557177111117775A  Quote rule 0
  Type codes (jump 064)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  Type codes (jump 100)    : 55AA7555AA5A71A1A5555557177111117775A  Quote rule 0
  =====
  Sampled 10049 rows (handled \n inside quoted fields) at 101 jump points
  Bytes from first data row on line 1 to the end of last row: 6823372781
  Line length: mean=126.15 sd=8.30 min=100 max=359
  Estimated number of rows: 6823372781 / 126.15 = 54088821
  Initial alloc = 62279495 rows (54088821 + 15%) using bytes/max(mean-2*sd,min) clamped between [1.1*estn, 2.0*estn]
  =====
[08] Assign column names
[09] Apply user overrides on column types
  After 4 type and 23 drop user overrides : 00AA700000000000000000070775555077750
[10] Allocate memory for the datatable
  Allocating 14 column slots (37 - 23 dropped) with 62279495 rows
Garbage collection 62 = 48+7+7 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
13.6 Mbytes of vectors used (2%)
Garbage collection 63 = 48+7+8 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
488.7 Mbytes of vectors used (42%)
Garbage collection 64 = 48+7+9 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
963.9 Mbytes of vectors used (56%)
Garbage collection 65 = 48+7+10 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
1439.1 Mbytes of vectors used (63%)
Garbage collection 66 = 48+7+11 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
1914.2 Mbytes of vectors used (67%)
Garbage collection 67 = 48+7+12 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
2864.5 Mbytes of vectors used (77%)
Garbage collection 68 = 48+7+13 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
3577.3 Mbytes of vectors used (78%)
Garbage collection 69 = 48+7+14 (level 2) ... 
46.5 Mbytes of cons cells used (60%)
4290.0 Mbytes of vectors used (75%)
[11] Read the data
  jumps=[0..6520), chunk_size=1046529, total_size=6823372422
|--------------------------------------------------|
|============================Garbage collection 70 = 49+7+14 (level 0) ... 
76.5 Mbytes of cons cells used (99%)
5487.5 Mbytes of vectors used (96%)
=Garbage collection 71 = 49+8+14 (level 1) ... 
77.0 Mbytes of cons cells used (100%)
5487.6 Mbytes of vectors used (96%)
Garbage collection 72 = 49+8+15 (level 2) ... 
77.0 Mbytes of cons cells used (81%)
5487.1 Mbytes of vectors used (80%)
==============Garbage collection 73 = 50+8+15 (level 0) ... 
94.3 Mbytes of cons cells used (100%)
5494.0 Mbytes of vectors used (80%)
Garbage collection 74 = 50+9+15 (level 1) ... 
94.5 Mbytes of cons cells used (100%)
5494.1 Mbytes of vectors used (80%)
Garbage collection 75 = 50+9+16 (level 2) ... 
94.5 Mbytes of cons cells used (82%)
5493.1 Mbytes of vectors used (67%)
=======|
Read 53945186 rows x 14 columns from 6.355GB (6823372783 bytes) file in 00:24.772 wall clock time
[12] Finalizing the datatable
  Type counts:
        23 : drop      '0'
         5 : int32     '5'
         7 : float64   '7'
         2 : string    'A'
=============================
   0.005s (  0%) Memory map 6.355GB file
   0.018s (  0%) sep=',' ncol=37 and header detection
   0.000s (  0%) Column type detection using 10049 sample rows
   5.496s ( 22%) Allocation of 62279495 rows x 37 cols (5.336GB) of which 53945186 ( 87%) rows used
  19.253s ( 78%) Reading 6520 chunks of 0.998MB (8295 rows) using 40 threads
   =    0.433s (  2%) Finding first non-embedded \n after each jump
   +    1.482s (  6%) Parse to row-major thread buffers (grown 0 times)
   +    9.515s ( 38%) Transpose
   +    7.822s ( 32%) Waiting
   0.000s (  0%) Rereading 0 columns due to out-of-sample type exceptions
  24.772s        Total
Garbage collection 76 = 51+9+16 (level 0) ... 
105.3 Mbytes of cons cells used (91%)
5500.3 Mbytes of vectors used (67%)
Garbage collection 77 = 51+10+16 (level 1) ... 
105.4 Mbytes of cons cells used (91%)
5500.2 Mbytes of vectors used (67%)
> DT[, Month := as.IDate(Month, format = "%Y-%m-%d")]
Garbage collection 78 = 51+10+17 (level 2) ... 
107.5 Mbytes of cons cells used (76%)
8174.1 Mbytes of vectors used (81%)
Garbage collection 79 = 51+11+17 (level 1) ... 
107.5 Mbytes of cons cells used (76%)
5910.4 Mbytes of vectors used (59%)
> gcinfo(FALSE)
[1] TRUE

مدهش! : tada: عمل رائع لجميع المعنيين ، خاصة mattdowle الذي يجب أن يكون قصيرًا بضع شعرات الآن مع هذا :)

يبدو أن استراتيجيتي المتمثلة في "البقاء في إجازة حتى يتم حل المشكلة" قد نجحت هنا :-)

هل هناك أي شيء آخر يجب أن أحاول إلقاء نظرة عليه أم أن هذه المشكلة تم حلها؟

شكرا aadler و HughParsonage! ارتياح.
kevinushey ها ها. نعم كان جانب جدول البيانات وتم حله الآن (PR # 2488). شكر.