Mavros: Menggunakan mavros untuk terhubung dengan pixracer melalui wifi melalui udp

Detail masalah

Saya mencoba menghubungkan ke unit pixracer dengan mavros. Sebelumnya saya telah menggunakan komputer pendamping yang terhubung ke pixhawk melalui kabel serial fisik. Sekarang saya ingin menggunakan koneksi wifi untuk berkomunikasi langsung dengan pixracer melalui papan ESP8266. Saya telah mengonfigurasi wifi yang berjalan dalam mode stasiun dan dengan senang hati terhubung dengan qGroundcontrol dan router saya (jadi saya pikir pixracer/ESP8266 berfungsi dan diatur dengan benar) tetapi saya berjuang untuk terhubung melalui mavros ke fcu.

Alamat udp yang saya gunakan adalah: udp://:[email protected]:14540 - di mana 192.168.1.9 adalah alamat ip pixracer

Apakah format ini terlihat OK? Mungkin ada beberapa parameter yang perlu saya atur juga? Saya telah menetapkan SYS_COMPANION ke ESP8266 (921600 baud, 8N1) .

Versi dan platform MAVROS

Mavros: 0.22.0
ROS: Kinetik
Ubuntu: 16.04

Jenis dan versi autopilot

[ ] ArduPilot
[x] PX4

Versi: 1.6.5

Log simpul

copy output of mavros_node. Usually console where you run roslaunch

Diagnostik

header: 
  seq: 15
  stamp: 
    secs: 1523479866
    nsecs: 896584974
  frame_id: ''
status: 
  - 
    level: 1
    name: "UAV_1/mavros: FCU connection"
    message: "not connected"
    hardware_id: "udp://:[email protected]:14540"
    values: 
      - 
        key: "Received packets:"
        value: "0"
      - 
        key: "Dropped packets:"
        value: "0"
      - 
        key: "Buffer overruns:"
        value: "0"
      - 
        key: "Parse errors:"
        value: "0"
      - 
        key: "Rx sequence number:"
        value: "0"
      - 
        key: "Tx sequence number:"
        value: "141"
      - 
        key: "Rx total bytes:"
        value: "0"
      - 
        key: "Tx total bytes:"
        value: "36947"
      - 
        key: "Rx speed:"
        value: "0.000000"
      - 
        key: "Tx speed:"
        value: "9547.000000"
  - 
    level: 2
    name: "UAV_1/mavros: GPS"
    message: "No satellites"
    hardware_id: "udp://:[email protected]:14540"
    values: 
      - 
        key: "Satellites visible"
        value: "0"
      - 
        key: "Fix type"
        value: "0"
      - 
        key: "EPH (m)"
        value: "Unknown"
      - 
        key: "EPV (m)"
        value: "Unknown"
  - 
    level: 2
    name: "UAV_1/mavros: Heartbeat"
    message: "No events recorded."
    hardware_id: "udp://:[email protected]:14540"
    values: 
      - 
        key: "Heartbeats since startup"
        value: "0"
      - 
        key: "Frequency (Hz)"
        value: "0.000000"
      - 
        key: "Vehicle type"
        value: "Generic micro air vehicle"
      - 
        key: "Autopilot type"
        value: "Generic autopilot"
      - 
        key: "Mode"
        value: ''
      - 
        key: "System status"
        value: "Uninit"
  - 
    level: 0
    name: "UAV_1/mavros: System"
    message: "Normal"
    hardware_id: "udp://:[email protected]:14540"
    values: 
      - 
        key: "Sensor present"
        value: "0x00000000"
      - 
        key: "Sensor enabled"
        value: "0x00000000"
      - 
        key: "Sensor helth"
        value: "0x00000000"
      - 
        key: "CPU Load (%)"
        value: "0.0"
      - 
        key: "Drop rate (%)"
        value: "0.0"
      - 
        key: "Errors comm"
        value: "0"
      - 
        key: "Errors count #1"
        value: "0"
      - 
        key: "Errors count #2"
        value: "0"
      - 
        key: "Errors count #3"
        value: "0"
      - 
        key: "Errors count #4"
        value: "0"
  - 
    level: 2
    name: "UAV_1/mavros: Battery"
    message: "No data"
    hardware_id: "udp://:[email protected]:14540"
    values: 
      - 
        key: "Voltage"
        value: "-1.00"
      - 
        key: "Current"
        value: "0.0"
      - 
        key: "Remaining"
        value: "0.0"
  - 
    level: 2
    name: "UAV_1/mavros: Time Sync"
    message: "No events recorded."
    hardware_id: "udp://:[email protected]:14540"
    values: 
      - 
        key: "Timesyncs since startup"
        value: "0"
      - 
        key: "Frequency (Hz)"
        value: "0.000000"
      - 
        key: "Last dt (ms)"
        value: "0.000000"
      - 
        key: "Mean dt (ms)"
        value: "0.000000"
      - 
        key: "Last system time (s)"
        value: "0.000000000"
      - 
        key: "Time offset (s)"
        value: "0.000000000"
---

Periksa ID

ERROR. I got 0 addresses, but not your target 1:1